The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications; ; ; ; ; ;
in Particuology (in press)
The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applicationsin Particuology (in press)
SOFTENING AND MELTING MODELING OF IRON ORE PARTICLES USING A CFD-DEM COUPLING METHODScientific Conference (2018, September 25)
Verlet buffer for broad phase interaction detection in Discrete Element MethodPoster (2018, September 24)
A co-located partitions strategy for parallel CFD-DEM couplingsin Advanced Powder Technology (2018)
Hybrid MPI+OpenMP Implementation of eXtended Discrete Element Methodin Proc. of the 9th Workshop on Applications for Multi-Core Architectures (WAMCA'18), part of 30th Intl. Symp. on Computer Architecture and High Performance Computing (SBAC-PAD 2018) (2018, September)
Experimental and numerical investigation into the softening Behavior of a packed bed of iron ore pelletsin Powder Technology (2018), 339
The Extented Discrete Element Method (XDEM): An Advanced Approach to Model Blast Furnacein Iron Ores and Iron Oxide Materials (2018)
Softening and melting modeling of iron ore particles using a discrete - continuous coupling methodScientific Conference (2018, June 13)
Hydrodynamic Analysis of Gas-Liquid-Liquid-Solid Reactors using the XDEM Numerical Approachin Canadian Journal of Chemical Engineering (2018)
A Multiscale DEM-VOF Method for the simulation of three-phase flowsin International Journal of Multiphase Flow (2018), 99
Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactorin Journal of Nuclear Engineering and Radiation Science (2018)
Development of a Data-Driven Approach based on Kalman filtering for CFD Reactor Analysisin PHYSOR 2018 (2018)
A Parallel Multiscale DEM-VOF Method For Large-Scale Simulations Of Three-Phase Flowsin Proceedings of ECCM-ECFD 2018 (2018)
A Numerical approach for the evaluation of particle-induced erosion in an Abrasive Waterjet focusing tubein Powder Technology (2018)
Coupled CFD-DEM with Heat and Mass transfer to Investigate the Melting of a Granular Packed Bedin Chemical Engineering Science (2017)
Numericl Analysis of the Fluiddynamic Interaction between Carrier Gas and PowderScientific Conference (2017, October 11)
Resolving Multiphase Flow through Packed Bed of Solid Particles Using eXtended Discrete Element Method with Porosity Calculationin Industrial and Engineering Chemistry (2017)
A CFD–DEM approach coupled with heat transfer for the melting process of a packed of particlesScientific Conference (2017, September 28)
Multiscale model of sintering: diffusion and plastic flowScientific Conference (2017, September 27)
Preliminary investigation on the capability of eXtended Discrete Element method for treating the dripping zone of a blast furnacein ISIJ International (2017), 58(1),
Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approachin Case Studies in Thermal Engineering (2017), 10
On the performance of an overlapping-domain parallelization strategy for Eulerian-Lagrangian Multiphysics softwarein AIP Conference Proceedings ICNAAM 2017 (2017, September)
Parallelizing XDEM: Load-balancing policies and efficiency, a studyScientific Conference (2017, September)
Comparing Broad-Phase Interaction Detection Algorithms for Multiphysics DEM Applicationsin AIP Conference Proceedings ICNAAM 2017 (2017, September)
Flow characteristics of metallic powder grains for additive manufacturingin EPJ Web of Conferences (2017), 13001
Model Study of Multiphase Flow Through Packed Particles by eXtended Discrete Element Method (XDEM)Scientific Conference (2017, June 20)
Investigating Multiphase flow Behavior in Trickle Bed Reactors using eXtended Discrete Element Method (XDEM)Scientific Conference (2017, May 08)
Evaluating Erosion Patterns in an abrasive water jet cutting nozzle using XDEMin Advances in Powder Metallurgy & Particulate Materials (2017)
LES-VOF SIMULATIONS OF A PURE WATER JET DEVELOPING INSIDE AN AWJC NOZZLE: PRELIMINARY OBSERVATIONS AND GUIDELINESin 2017 WJTA-IMCA Conference Proceedings (2017)
Multiscale-multiphysics approaches for engineering applicationsin AIP Conference Proceedings (2017), 1863(1), 180001
On the choice of a phase interchange strategy for a multiscale DEM-VOF Methodin AIP Conference Proceedings (2017), 1863
Application of the extended discrete element method (XDEM) in the melting of a single particlein Baniasadi, Mehdi (Ed.) Application of the extended discrete element method (XDEM) in the melting of a single particle (2016, July 19)
ON THE INFLUENCE OF DIFFERENT MAPPING TECHNIQUES FOR A MULTISCALE APPROACH TO TURBULENT THREE-PHASE FLOWSScientific Conference (2016, June 06)
CFD-XDEM FOR PREDICTING MULTIPHASE FLOW BEHAVIOR THROUGH POROUS MEDIAScientific Conference (2016, June 05)
A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxidein LA METALLURGIA ITALIANA (2016), (3), 49-54
XDEM for Tuning Lumped Models of Thermochemical Processes Involving Materials in the Powder Statein Engineering Journal (2016), 20(5), 187-201
HPC or the Cloud: a cost study over an XDEM Simulationin Proc. of the 7th International Supercomputing Conference in Mexico (ISUM 2016) (2016)
Modeling of the biomass combustion on a forward acting grate using XDEMin Chemical Engineering Science (2016), 142
Numerical study of the influence of particle size and packing on pyrolysis products using XDEMin International Communications in Heat & Mass Transfer (2016), 71
Berechnung des Transportes von Treibgut bei Hochwasserin 39. DRESDNER WASSERBAUKOLLOQUIUM (2016)
A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditionsin Powder Technology (2015), 275
Performance Evaluation of the XDEM framework on the OpenStack Cloud Computing Middlewarein Proceedings of the Fourth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering (2015, February)
A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditionsin Powder Technology (2015), 275
Predicting Tungsten Oxide Reduction with the Extended Discrete Element Methodin Advances in Powder Metallurgy & Particulate Materials (2015), (Proceedings of the 2015 International Conference on Powder Metallurgy Particulate Materials), 0235--0248
The Extended Discrete Element Method (XDEM) as a Flexible and Advanced Tool in Multi-physics Applicationsin 26th International Symposium on Transport Phenomena (2015)
Multiskalenmodellierung für technische Anwendungenin ECEMP 2015, European Centre for Emerging Materials and Processes (2015)
A discrete/continuous numerical approach to multi-physicsin IFAC-PapersOnLine (2015), 28(1), 645-650
A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxidein SteelSim 2015, MODELLING and SIMULATION of METALLURGICAL PROCESSES in STEELMAKING (2015)
Experimental and numerical investigation into iron ore reduction in packed bedsin Chemical Engineering Science (2015)
A Discrete Approach to Describe the Elastic-plastic Behaviour of Snowin Fourth Conference on Particle-Based Methods (PARTICLES 2015) (2015)
Assessing Heat Transfer Through Walls Of Packed Bed Reactors By An Innovative Particle-Resolved Approachin 18th IFRF Member's Conference (2015)
ROS homeostasis in a dynamic model: How to save PD neuron?Poster (2014, December)
Comparison of ODE-based models for reactive oxygen species regulation systemin Proceedings of ICCSA 2014 (2014, June)
ROS-activated signaling network: dynamic modelling and design principles studyPoster (2014, June)
eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmospherein LLanes, Luis (Ed.) eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmosphere (2014, March 10)
Detailed numerical modeling of pyrolysis in a heterogeneous packed bed using XDEMin Journal of Analytical and Applied Pyrolysis (2014), 106
Application of XDEM as a novel approach to predict drying of a packed bedin International Journal of Thermal Sciences (2014), 75
XDEM employed to predict reduction of tungsten oxide in a dry hydrogen atmospherein International Journal of Refractory Metals & Hard Materials (2014)
XDEM - FEM Coupling Simulations of the Interactions between a Tire Tread and Granular TerrainE-print/Working paper (2014)
Scale-Resolved Prediction of Pyrolysis in a Packed Bed by the Extended Discrete Element Method (XDEM)in The Ninth International Conference on Engineering Computational Technology (2014)
An Integral Approach to Multi-physics Application for Packed Bed Reactorsin 24th European Symposium on Computer Aided Process Engineering, ESCAPE 24 (2014)
The extended discrete element method (XDEM) applied to drying of a packed bedin Industrial Combustion (2014), 14
Beschreibung des Transportes von Schwimmkörpern bei Flutwasser über eine Euler-Lagrange Kopplungin Dresdner Wasserbauliche Mitteilungen (2014)
Experimental and Numerical Evaluation of the Residence Time Characteristics on a Forward Acting Gratein Condensed Matter 2014 (2014)
Transport Characteristics of Granular Matter on a Forward Acting Gratein COST Action MP1305 Flowing Matter (2014)
An Efficient 3D FEM - DEM Coupling for Granular Matter Applicationsin Coupled MBS-FE Applications: A New Trend in Simulation (2013, November)
Simulation des Traktionsverhaltens von Reifen auf granularem Untergrund durch eine Kopplung zwischen der Finiten (FEM) und der Diskreten Element Methode (DEM)in VDI-Berichte "Reifen-Fahrwerk-Fahrbahn" (2013, October)
Design principles study of ROS management and ROS-induced mitophagy with a kinetic modelPoster (2013, September 27)
Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungenin 26. Deutscher Flammentag Verbrennung und Feuerung (2013, September)
3D DEM – FEM Coupling to Analyse the Tractive Performance of Different Tire Treads in Soilin Idelsohn, S; Papadrakakis, M; Schrefler, B (Eds.) Computational Methods for Coupled Problems in Science and Engineering V (2013, June)
ROS-induced regulation of mitophagy and its failure in Parkinson’s diseasePoster (2013, May)
The extended discrete element method (XDEM) for multi-physics applicationsin Scholarly Journal of Engineering Research (2013), 2
Extended Discrete Element Method (XDEM) to Model Heterogeneous Reactions in Packed Bedsin PARTEC - International Congress on Particle Technology (2013, April)
Discrete Element Modeling of Inter-Granular Bonds between Snow Grainsin PARTEC - International Congress on Particle Technology (2013, April)
eXtended Discrete Element Method used for convective heat transfer predictionsin International Review of Mechanical Engineering (2013), 7(2), 329-336
Unified Design for Parallel Execution of Coupled Simulations using the Discrete Particle Methodin Proceedings of the Third International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering (2013)
The extended discrete element method (XDEM) for multi-physics applicationsin Scholarly Journal of Engineering Research (2013)
The Extended Discrete Element Method (XDEM) for Multi-Physics ApplicationsScientific Conference (2013)
Simulation von reagierenden Mehrphasen- strömungen mit der Extended Discrete Element Method (XDEM)Scientific Conference (2013)
Application of the Extended Discrete Element Method (XDEM) in Computer-Aided Process EngineeringScientific Conference (2013)
Enhanced Thermal Process Engineering by the Extended Discrete Element Method (XDEM)in Universal Journal of Engineering Science (2013), 1
Die Extended Discrete Element Method (XDEM) für multiphysikalische AnwendungenScientific Conference (2013)
Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungenin 26. Deutscher Flammentag Verbrennung und Feuerung (2013)
Numerical prediction of the bulk density of granular particles of di erent geometriesin KONA Powder and Particle Journal (2013)
A Numerical Approach to Predict Sulphur Dioxide Emissions During Switchgrass Combustionin Chemical and Process Engineering (2013)
Experimental and numerical investigation into the residence time distribution of granular particles on forward and reverse acting gratein Chemical Engineering Science (2013)
Assessment of the potentials of implicit integration method in discrete element modelling of granular matterin Computers & Chemical Engineering (2013)
Resolution of Different Length Scales by an Efficient Combination of the Finite Element Method and the Discrete Element Methodin Topping, B.H.V. (Ed.) Proceedings of the Eleventh International Conference on Computational Structures Technology (2012)
Heat transfer in Fixed and Moving Packed Beds Predicted by the Extended Discrete Element Methodin Advances in Industrial Heat Transfer (2012)
Developing a fast photochemical calculator for an integrated assessment modelin International Journal of Environment and Pollution (2012)
An Integrated Approach to Model Blast Furnacesin Proceedins: METEC InSteelCON 2011, Düsseldorf, Germany, CCD Congress Center Düsseldorf, 27th June - 1st July, 2011 (2011)
Application of a detailed reaction mechanism to pyrolysis of miscanthus giganteusin Journal of Analytical and Applied Pyrolysis (2011)
Prediction of pyrolysis of pistachio shells based on its components hemicellulose, cellulose and ligninin Fuel Processing Technology (2011)
Prediction of Conversion of a Packed Bed of Fuel Particles on a Forward Actingin Computer Aided Chemical Engineering (2011)
Simulation of Thermal Conversion of Solid Fuel By The Discrete Particle Methodin Lithuanian Journal of Physics (2011)
Evaluation of potassium chloride emissions applying the Discrete Particle Method (DPM)in Computers & Chemical Engineering (2011)
Evaluation of potassium chlorine emissions applying the Discrete Particle Method (DPM)in Energy & Fuels (2011)
Trade-offs between energy cost and health impact in a regional coupled energy–air quality model: the LEAQ modelin Environmental Research Letters (2011)
A discrete approach to thermal conversion of solid fuel by the discrete particle method (dpm)in Abstract book of 10th International Conference Modern Building Materials, Structures and Techniques (2010)
Approach To Predict Emission of Sulfur Dioxide during Switchgrass Combustion Employing the Discrete Particle Method (DPM)in Energy & Fuels (2010), 2(24), 945953
An implicit approach to predict the dynamics of granular mediain Abstract book of 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (2010), 10(1), 55-56
Selecting a fast air quality calculator for an optimization meta-modelin Monitoring and Management of Air Pollution (2009)
Parallel implementation of domain decomposition algorithm for molecular dynamicsin PARENG 2007 (2009)
Experimental and numerical evaluation of the transport behaviour of moving bed on a forward acting gratein Granular Matter (2007), 9
Evaluation of the residence time of a moving fuel bed on a forward acting grate.in Granular Matter (2006)
An approach to qualify the intensity of mixing on a forward acting grate.in Chemical Engineering Science (2005), (60/6), 1649-1659
Measurements and particle resolved modelling of the thermo-and fluid dynamics of a packed bed.in Journal of Analytical and Applied Pyrolysis (2004), (70), 211-233
Characterisation of muniipal solid waste combustion in a great furnace.in Waste Management (2004), 23(8)
Catalytic converters in a one-dimensional cycle simulation code considering three-dimensional behavior.in SAE International Journal of Fuels and Lubricants (2004)
Characterization of Municipal Solid Waste Combustion in a Grate Furnacein Waste Management (2003), vol. 23/8
Numerical Simulation of a Diesel Particulate Filter during Loading and Regenerationin ASME Internal Combustion Engine Division (2003)
Drying and prolysis of wood particles: experiments and simulation.in Journal of Analytical and Applied Pyrolysis (2003), 70
Measurements and Application of a Discrete Particle Model (DPM) to Simulate Combustion of a Packed Bed of Individual Fuel Particles.in Combustion and Flame (2002), 131
Measurements and particle resolved modelling of drying and pyrolysis of a packed bed.in Journal of Analytical and Applied Pyrolysis (2002)
Measurements and particle resolved modelling of heat-up and drying of a packed bed.in Biomass & Bioenergy (2002), 23 (4)
Numerical simulation of a motion of non-sherical granular material using object-orientated techniques.in Computer Methods in Applied Mechanics & Engineering (2002), 191
A flexible and stable numerical method for the decomposition process of wood particles.in Chemosphere (2001), 42
An approach to simulate the motion of spherical and non-spherical fuel particles in combustions chambers.in Granular Matter (2001), 3
Bestimmung des Kontaktpunktes für die Bewegung von elliptischen granularen Medien.in ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik=Journal of Applied Mathematics & Mechanics (2001), suppl.4(0946-8463), 831-832
Numerical modelling of electrified particle layer formation on the surface of filtration fabric.in Environmental Engineering (2001), 4
A principle approach to model furnace processes for waste incineration.in Environ. Comb. Tech (2001), 2
Simulación Numérica de la Combustión en Lecho Estacionarioin Ingenieria Quimica -Madrid- (2000), 366
Classification of Combustion Regimes in a Packed Bed of Particles Based on the Relevant Time and Length Scalesin Combustion and Flame (1999), 116(1-2), 297-301
Numerical simulation of the motion and combustion of granular material.in Industrial Heat Engineering (1999), 21
Experimente und Modellierung zur heterogenen und homogenen Verbrennung.in FZKA-Bericht (1998), 6084
Application de la Conception Objet Orienté à la Modélisation de l'Incinération de Déchets Municipauxin Informatique pour l’Environnement ’97 (1997)
Zur Modellierung der thermo-und fluiddynamischen Vorgänge bei der Festbettverbrennung.in Kaleidoskop aus aktueller forschung und Entwicklung. (1997)
A mass conservative Kalman filter algorithm for thermo-computational fluid dynamicsin Materials (ISSN 1996-1944) (n.d.)
