Abuel-Naga, H., Thermo-mechanical behavior of soft Bangkok clay: experimental results and constitutive modeling. PhD Thesis, 2005, Asian Institute of Technology, Pathumthani.
Abuel-Naga, H.M., Bergado, D.T., Bouazza, A., Pender, M., Thermomechanical model for saturated clays. Géotechnique 59:3 (2009), 273–278.
Abuel-Naga, H.M., Bergado, D.T., Bouazza, A., Thermally induced volume change and excess pore water pressure of soft Bangkok clay. Engineering Geology 89:1–2 (2007), 144–154.
Baldi, G., Hueckel, T., Pellegrini, R., Thermal volume changes of the mineral-water system in low-porosity clay soils. Canadian Geotechnical Journal 25:4 (1988), 807–825.
Bellia, Z., Ghembaza, M.S., Belal, T., A thermo-hydro-mechanical model of unsaturated soils based on bounding surface plasticity. Computers and Geotechnics 69 (2015), 58–69.
Bolzon, G., Schrefler, A., Thermal effects in partially saturated soils: a constitutive model. International Journal for Numerical and Analytical Methods in Geomechanics 29:9 (2005), 861–877.
Boudali, M., Leroueil, S., Srinivasa Murthy, B.R., Viscous behaviour of natural clays. Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering, 1994, Oxford and IBH Publishing, New Delhi.
Burghignoli, A., Desideri, A., Miliziano, S., Deformability of clays under non isothermal conditions. Rivista Italiana Di Geotecnica 26:4 (1992), 227–236.
Burland, J.B., On the compressibility and shear strength of natural clays. Géotechnique 40:3 (1990), 329–378.
Cekerevac, C., Laloui, L., Experimental study of thermal effects on the mechanical behaviour of a clay. International Journal for Numerical and Analytical Methods in Geomechanics 28:3 (2004), 209–228.
Collins, I.F., Kelly, P.A., A thermomechanical analysis of a family of soil models. Géotechnique 52:7 (2002), 507–518.
Cotecchia, F., Chandler, R.J., One-dimensional compression of a natural clay: structural changes and mechanical effects. 1997, A.A. Balkema, Rotterdam.
Cuccovillo, T., Coop, M.R., On the mechanics of structured sands. Géotechnique 49:6 (1999), 741–760.
Cudny, M., Vermeer, P.A., On the modelling of anisotropy and destructuration of soft clays within the multi-laminate framework. Computers and Geotechnics 31:1 (2004), 1–22.
Cui, Y.J., Sultan, N., Delage, P., A thermomechanical model for saturated clays. Canadian Geotechnical Journal 37:3 (2000), 607–620.
Decleer, J., Viane, W., Vandenberghe, N., Relationships between chemical, physical and mineralogical characteristics of the Rupelian Boom clay, Belgium. Clay Minerals 18 (1983), 1–10.
Desai, C.S., Siriwardane, H.J., Constitutive laws for engineering materials: with emphasis on geologic materials. 1984, Prentice-Hall, New Jersey.
Ghahremannejad, B., Thermo-mechanical behaviour of two reconstituted clays. PhD Thesis, 2003, University of Sydney.
Graham, J., Li, C.C., Comparison of natural and remoulded plastic clay. Journal of Geotechnical Engineering 111:7 (1985), 865–881.
Graham, J., Tanaka, N., Crilly, T., Alfaro, M., Modified Cam-clay modelling of temperature effects in clays. Canadian Geotechnical Journal 38:3 (2001), 608–621.
Hamidi, A., Khazaei, C., A thermo-mechanical constitutive model for saturated clays. International Journal of Geotechnical Engineering 4:4 (2010), 445–459.
Hamidi, A., Tourchi, S., Khazaei, C., Thermomechanical constitutive model for saturated clays based on critical state theory. International Journal of Geomechanics, 15(1), 2015, 10.1061/(ASCE)GM.1943-5622.0000402.
Hamidi, A., Tourchi, S., A thermo-mechanical constitutive model for unsaturated clays. International Journal of Geotechnical Engineering, 2017, 10.1080/19386362.2016.1260312.
Hong, P.Y., Pereira, J.M., Cui, Y.J., Tang, A.M., A two-surface thermomechanical model for saturated clays. International Journal for Numerical and Analytical Methods in Geomechanics 40:7 (2016), 1059–1080.
Horpibulsuk, S., Liu, M.D., Liyanapathirana, D.S., Suebsuk, J., Behaviour of cemented clay simulated via the theoretical framework of the structured Cam Clay model. Computers and Geotechnics 37:1–2 (2009), 1–9.
Horpibulsuk, S., Liu, M.D., Structured Cam Clay model with cementation effect. Geotechnical Engineering Journal of the SEAG & AGSSEA 46:1 (2015), 86–94.
Horpibulsuk, S., Suebsook, J., Liu, M.D., Carter, J.P., Simulation of undrained shear behaviour of cemented clay with the modified structured cam clay model. Proceddings of the 6th International Symposium on Soil/Ground Improvement and Geosynthetics, 2006.
Houlsby, G.T., Wroth, C.P., Variation of shear modulus of a clay with pressure and overconsolidation ratio. Soils and Foundations 31 (1991), 138–143.
Houston, S.L., Houston, W.N., Williams, N.D., Thermo-mechanical behavior of seafloor sediments. Journal of Geotechnical Engineering 111:11 (1985), 1249–1263.
Hueckel, T., Baldi, G., Thermoplasticity of saturated clays: experimental constitutive study. Journal of Geotechnical Engineering 116:12 (1990), 1778–1796.
Hueckel, T., Borsetto, M., Thermoplasticity of saturated soils and shales: constitutive equations. Journal of Geotechnical Engineering 116:12 (1990), 1765–1777.
Kuntiwattanakul, P., Towhata, I., Ohishi, K., Seko, I., Temperature effects on undrained shear characteristics of clay. Soils and Foundations 35:1 (1995), 147–162.
Kurz, D., Sharma, J., Alfaro, M., Graham, J., Semi-empirical elastic-thermoviscoplastic model for clay. Canadian Geotechnical Journal 53 (2016), 1583–1599.
Lagioia, R., Puzrin, A.M., Potts, D.M., A new versatile expression for yield and plastic potential surfaces. Computers and Geotechnics 19:3 (1996), 171–191.
Leroueil, S., Vaughan, P.R., The general and congruent effects of structure in natural soils and week rock. Géotechnique 40:3 (1990), 467–488.
Liu, M.D., Carter, J.P., A structured Cam-clay model. Canadian Geotechnical Journal 39:6 (2002), 1313–1332.
Masad, E., Muhunthan, B., Chameau, J.L., Stress-strain model for clays with anisotropic void ratio distribution. International Journal for Numerical and Analytical Methods in Geomechanics 22:5 (1998), 393–416.
Moritz, L., Geotechnical properties of clay at elevated temperatures. Report No. 47., 1995, Swedish Geotechnical Institute, Linköping.
Olson, R.E., The shear strength properties of calcium illite. Géotechnique 12:1 (1962), 23–43.
Robinet, J.C., Rahbaoui, A., Plas, F., Lebon, P.A., Constitutive thermomechanical model for saturated clays. Engineering Geology 41:1–4 (1996), 145–169.
Roscoe, K.H., Burland, J.B., On the generalized stress-strain behavior of wet clay. Engineering plasticity. 1968, Cambridge University Press, Cambridge, U.K, 535–609.
Suebsuk, J., Horpibulsuk, S., Liu, M.D., Modified structured cam clay: a generalised critical state model for destructured, naturally structured and artificially structured clays. Computers and Geotechnics 37:7–8 (2010), 956–968.
Sultan, N., Delage, P., Cui, Y.J., Temperature effects on the volume change behaviour of Boom clay. Engineering Geology 64:2–3 (2002), 135–145.
Sultan, N., Cui, Y.J., Delage, P., Yielding and plastic behaviour of Boom clay. Géotechnique 60:9 (2010), 657–666.
Thomas, H.R., He, Y., Sansom, M.R., Li, C.L.W., On the development of a model of the thermo-mechanical-hydraulic behaviour of unsaturated soils. Engineering Geology 41:1–4 (1996), 197–218.
Tidfors, M., Sällfors, G., Temperature effect on preconsolidation pressure. Geotechnical Testing Journal 12:1 (1989), 93–97.
Tourchi, S., Hamidi, A., Thermo-mechanical constitutive modeling of unsaturated clays based on the critical state concepts. Journal of Rock Mechanics and Geotechnical Engineering 7:2 (2015), 193–198.
Uddin, K., Strength and deformation behavior of cement–treated Bangkok clay. D.Eng. Thesis, 1995, Asian Institute of Technology, Bangkok.
Wang, L.Z., Wang, K.J., Hong, Y., Modeling temperature-dependent behavior of soft clay. Journal of Geotechnical and Geoenvironmental Engineering, 142(8), 2016, 10.1061/(ASCE)EM.1943-7889.0001108.
Xiao, H., Lee, F.H., Liu, Y., Bounding surface cam-clay model with cohesion for cement-admixed clay. International Journal of Geomechanics, 17(1), 2017, 10.1061/(ASCE)GM.1943-5622.0000671.
Xiong, Y., Zhang, S., Ye, G., Zhang, F., Modification of thermo-elasto-viscoplastic model for soft rock and its application to THM analysis of heating tests. Soils and Foundations 54:2 (2014), 176–196.
Xiong, Y., Ye, G., Zhu, H., Zhang, S., Zhang, F., A unified thermo-elasto-viscoplastic model for soft rock. International Journal of Rock Mechanics and Mining Sciences 93 (2017), 1–12.
Yang, C., Carter, J.P., Sheng, D., Description of compression behaviour of structured soils and its application. Canadian Geotechnical Journal 51:8 (2014), 921–933.
Yao, Y.P., Zhou, A.N., Non-isothermal unified hardening model: a thermo-elasto-plastic model for clays. Géotechnique 63:15 (2013), 1328–1345.
Yao, Y.P., Hou, W., Zhou, A.N., UH model: three-dimensional unified hardening model for overconsolidated clays. Géotechnique 59:5 (2009), 451–469.
Zhang, S., Zhang, F., A thermo-elasto-viscoplastic model for soft sedimentary rock. Soils and Foundations 49:4 (2009), 583–595.
