[en] This paper presents a comparison between the Integrated Function Modelling framework and SysML with the aim of deriving specific potentials for cross-fertilisation and further improvement regarding their application for function modelling in interdisciplinary design. The presented comparison comprises literature reviews as well as the practical application of both the IFM framework and SysML for modelling the functionality of an exemplary mechatronic system. The research leads to the identification of advantages and shortcomings in both approaches. Based on these insights, the paper further presents a conceptual adaptation of the IFM framework with the intention to improve its practical applicability and reducing modelling efforts.
Disciplines :
Ingénierie mécanique
Auteur, co-auteur :
EISENBART, Boris ; University of Luxembourg > Faculty of Science, Technology and Communication (FSTC) > Engineering Research Unit ; University of Sydney
GERICKE, Kilian ; University of Luxembourg > Faculty of Science, Technology and Communication (FSTC) > Engineering Research Unit
BLESSING, Lucienne ; University of Luxembourg > Faculty of Science, Technology and Communication (FSTC) > Engineering Research Unit
Co-auteurs externes :
yes
Langue du document :
Anglais
Titre :
Integrated Function Modelling: Comparing the IFM Framework With SysML
Date de publication/diffusion :
août 2015
Nom de la manifestation :
International Conference on Engineering Design ICED'15
Organisateur de la manifestation :
The Design Society
Lieu de la manifestation :
Milano, Italie
Date de la manifestation :
from 27-07-2015 to 31-07-2015
Manifestation à portée :
International
Titre de l'ouvrage principal :
Proceedings of the International Conference on Engineering Design 2015
AscTec (2014) User's Manual to Asctec Hummingbird AutoPilot, available online at: http://www.asctec.de/downloads/manuals/AscTec-Autopilot-Manual-v10.pdf (12 April 2014).
Bone, M. and Cloutier, R. (2010) The Current State of Model Based Systems Engineering. Results from the OMG SysML Request for Information 2009, Proceedings of the 8th Conference on Systems Engineering Research.
Borches, P. and Bonnema, G.M. (2010) System Evolution Barriers and How to Overcome Them!, Proceedings of the 8th Conference on Systems Engineering Research.
Chakrabarti, A. and Bligh, T. P. (2001) A Scheme for Functional Reasoning in Conceptual Design, Design Studies Vol. 22, No. 6, pp.493-517.
Dohr, F., Eisenbart, B., Huwig, C., Blessing, L. and Vielhaber, M. (2014) Software Support for the Consistent Transition from Requirements to Functional Modeling to System Simulation, Proceedings of the 10th NordDesign Conference.
Eder, W. and Hosnedl, S. (2008) Design Engineering: A Manual for Enhanced Creativity, CRC Press, Boca Raton, London, New York.
Eisenbart, B. (2014) Supporting Interdisciplinary System Development Through Integrated Function Modelling, Dissertation, University of Luxembourg, Luxembourg.
Eisenbart, B., Blessing, L.T.M. and Gericke, K. (2012) Functional Modelling Perspectives Across Disciplines. A Literature Review, Proceedings of 12th International Design Conference - DESIGN.
Eisenbart, B., Gericke, K. and Blessing, L.T.M. (2013a) An Analysis of Functional Modell Approaches Across Disciplines, AI EDAM, Vol. 27 No. 3, pp. 281-289.
Eisenbart, B., Gericke, K. and Blessing, L. (2013b) Adapting the IFM Framework to Functional Approaches Across Disciplines, Proceedings of the 19th International Conference on Engineering Design - ICED.
Eisenbart, B., Qureshi, A.J., Gericke, K. and Blessing, L.T.M. (2013c) Integrating Different Functional Modelling Perspectives, in Chakrabarti, A. and Prakash, R. (Eds.), Global Product Development, ICoRD'13, Springer, London, pp. 85-97.
Eisenbart, B., Gericke, K. and Blessing, L. (2014) Application of the IFM Framework for Modelling and Analysing System Functionality, Proceedings of the 13th International Design Conference - DESIGN.
Erden, M., Komoto, H., van Beek, T. J., D'Amelio, V., Echavarria, E. and Tomiyama, T. (2008) A Review of Function Modelling: Approaches and Applications, AI EDAM, Vol. 22, pp.147-169.
Frankenberger, E., Birkhofer, H. and Badke-Schaub, P. (Eds.) (1998) "Designers: The Key to Successful Product Development", Springer-Verlag, London.
Friedenthal, S., Moore, A. and Steiner, R. (2006) OMG Systems Modeling Language (OMG SysMLTM) Tutorial, INCOSE - International Symposium.
Kreimeyer, M. and Lindemann, U. (2011) Complexity Metrics in Engineering Design. Managing the Structure of Design Processes, Springer, Berlin.
Kleinsmann, M. and Valkenburg, R.C. (2008) Barriers and Enablers for Creating Shared Understanding in Co-design Projects, Design Studies, Vol. 29 No. 4, pp. 369-386.
OMG (2012) OMG Systems Modeling Language (OMG SysMLTM) Specification, available online at: http://www.omg.org/spec/SysML/1.3 (12 April 2014).
Pahl, G., Beitz, W.F.J. and Grote, K.-H. (2007) Engineering Design: A Systematic Approach, Springer, Berlin, Heidelberg, New York, Tokyo.
Peak, R., Paredis, C., McGinnis, L., Friedenthal, S., Burkhart, R. (2009) Integrating System Design with Simulation and Analysis Using SysML, INCOSE Insight, Vol.12, No.4, pp. 40-44.
Pires, A., Duprat, S., Faure, T., Besseyre, C., Beringuier, J. and Rolland, J. (2012) Use of Modelling Methods and Tools in an Industrial Embedded System Project. Works and Feedback, Proceedings of Embedded Real Time Software and Systems - ERTS.
Shai, O. and Reich, Y. (2004) Infused Design. I. Theory, Research in Engineering Design, Vol. 15 No. 2, pp. 93-107.
Weilkiens, T. (2008) Systems Engineering mit SysML: Modellierung, Analyse, Design, dpunkt.verlag, Heidelberg.
(www1) http://example.system-modeling.com/(15 March 2014).
