Mohajerani, M., Delage, P., Sulem, J., Monfared, M., Tang, A.M., Gatmiri, B., A laboratory investigation of thermally induced pore pressure in the Callovo-Oxfordian claystone. Int J Rock Mech Min Sci 52 (2012), 112–121.
Conil, N., Armand, G., Garitte, B., et al. In situ heating test in Callovo-Oxfordian claystone: measurement and interpretation. Montpellier Proceedings of 5th Int. Conf. On Clays in Natural and Engineered Barriers for Radioactive Waste Confinement, October 2012, 22–25.
Conil, N., Vitel, M., Plúa, C., Vu, M.N., Seyedi, D., Armand, G., In situ investigation of the THM behavior of the callovo-oxfordian claystone. Rock Mech Rock Eng 53 (2020), 2747–2769.
Seyedi, D., Armand, G., Conil, N., Vitel, M., Vu, M.N., On the thermo-hydro-mechanical pressurization in callovo-oxfordian claystone under thermal loading. Poromechanics VI: Proceedings of the Sixth Biot Conference on Poromechanics, 2017, 754–761.
Vu, M.N., Armand, G., Plua, C., Thermal pressurization coefficient of anisotropic elastic porous media. Rock Mech Rock Eng 53 (2020), 2027–2031.
Karamanos, S.A., Sarvanis, G.C., Keil, B.D., Card, R.J., Analysis and design of buried steel water pipelines in seismic areas. J Pipeline Syst Eng Pract, 8(4), 2017.
Bosgiraud, J.M., Baroux, C., Bumbieler, F., Crusset, D., HLW disposal package for cigéo: design basis and development timeline. Proceedings of 16th International High-Level Radioactive Waste Management Conference, 9-13 April 2017, Charlotte, 52–61.
Necib, S., Linard, Y., Crusset, D., et al. Corrosion at the carbon steel–clay borehole water and gas interfaces at 85°C under anoxic and transient acidic conditions. Corrosion Sci 111 (2016), 242–258.
Wileveau, Y., Cornet, F.H., Desroches, J., Blumling, P., Complete in situ stress determination in an argillite sedimentary formation. Phys Chem Earth 32 (2007), 866–878.
Robinet, J.C., Sardini, P., Coelho, D., et al. Effects of mineral distribution at mesoscopic scale on solute diffusion in a clayrich rock: example of the Callovo-Oxfordian mudstone (Bure, France). Water Resour Res 48:5 (2012), 17–27.
Armand, G., Noiret, A., Zghondi, J., Seyedi, D., Short- and long-term behaviors of drifts in the callovo-oxfordian claystone at the meuse/haute-marne underground research laboratory. Journal of Rock Mechanics and Geotechnical Engineering 5 (2013), 221–230.
Armand, G., Bumbieler, F., Conil, N., de la Vaissière, R., Bosgiraud, J.M., Vu, M.N., Main outcomes from in situ thermo-hydro-mechanical experiments programme to demonstrate feasibility of radioactive high-level waste disposal in the Callovo-Oxfordian claystone. Journal of Rock Mechanics and Geotechnical Engineering 9:3 (2017), 415–427.
Delay, J., Vinsot, A., Krieguer, J.M., Rebours, H., Armand, G., Making of the underground scientific experimental programme at the meuse/haute-marne underground research laboratory, north eastern France. Phys Chem Earth 32 (2007), 2–18.
Morel, J., Renaud, V., Armand, G., Feasibility of excavation of disposal cells in 500 m deep clay formation. Rock Engineering in difficult ground conditions – soft rocks and karst. Proceedings of EUROCK, 2009, 561–566.
Bumbieler, F., Armand, G., In-situ characterization of mechanical loads applied on a deep-buried steel casing. Proceedings of 2nd International Conference on Natural Hazards & Infrastructure, 23 – 26 June 2019, Chania.
Guayacán-Carrillo, L.M., Ghabezloo, S., Sulem, J., Seyedi, D., Armand, G., Effect of anisotropy and hydro-mechanical couplings on pore pressure evolution during tunnel excavation in low-permeability ground. Int J Rock Mech Min Sci 97 (2017), 1–14.
Gugala, J., Final report LUCOEX – WP3. D3:04 https://igdtp.eu/activity/lucoex-large-underground-concept-experiments/, 2015.
Seyedi D, Plúa C, Vitel M, et al. Upscaling THM modelling from small-scale to full-scale in-situ experiments in the Callovo-Oxfordian claystone. (Submitted in IJRMMS).
Coussy, O., Poromechanics. 2004, Wiley.
Tourchi, S., Vaunat, J., Gens, A., Vu, M.N., Bumbieler, F., Coupled THM analysis of long-term anisotropic convergence in the full-scale micro tunnel excavated in the callovo-oxfordian argillite. Barcelona Proceedings of VIII International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019), 3-5 June, 2019.
Tourchi, S., Vaunat, J., Gens, A., Vu, M.N., Bumbieler, F., Thermo-Hydro-Mechanical simulation of a full-scale steel-lined micro-tunnel excavated in the Callovo-Oxfordian Argillite. Barcelona Proceedings of XIV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2019), 3-5 September, 2019.
Tourchi S, Vaunat J, Gens A., Bumbieler F, Vu MN, Armand G. A full-scale in situ heating test in Callovo-Oxfordian claystone: observations, analysis and interpretation. (Submitted in Computers and Geotechnics).
Olivella, S., Carrera, J., Gens, A., Alonso, E.E., Non isothermal multiphase flow of brine and gas through saline media. Transport Porous Media 15:3 (1994), 271–293.
Mánica, M., Gens, A., Vaunat, J., Ruiz, D.F., A cross-anisotropic formulation for elasto-plastic models. Géotech Lett 6:2 (2016), 156–162.
Mánica, M., Gens, A., Vaunat, J., Ruiz, D.F., A time-dependent anisotropic model for argillaceous rocks. Application to an underground excavation in callovo-oxfordian claystone. Comput Geotech 85 (2017), 341–350.
Olivella, S., Gens, A., Carrera, J., Alonso, E.E., Numerical formulation for a simulator ‘CODE_BRIGHT’ for the coupled analysis of saline media. Eng Comput 13:7 (1996), 87–112.
Gens, A., Vaunat, J., Garitte, B., Wileveau, Y., In situ behaviour of a still layered clay subject to thermal loading: observations and interpretation. Geotechnique 57 (2007), 207–228.
Garitte, B., Gens, A., Vaunat, J., Armand, G., Thermal conductivity of argillaceous rocks: determination methodology using in situ heating tests. Rock Mech Rock Eng 47 (2014), 111–129.
Armand, G., Leveau, F., Nussbaum, C., et al. Geometry and properties of the excavation induced fractures at the Meuse/Haute-Marne URL drifts. Rock Mech Rock Eng 47 (2014), 21–41.
