Profil

PETERS Bernhard

University of Luxembourg > Faculty of Science, Technology and Medicine (FSTM) > Department of Engineering (DoE)

Main Referenced Co-authors
BESSERON, Xavier  (60)
ESTUPINAN DONOSO, Alvaro Antonio  (27)
ROUSSET, Alban  (26)
POZZETTI, Gabriele  (20)
MAHMOUDI, Amir Houshang  (15)
Main Referenced Keywords
CFD-DEM (18); XDEM (15); CFD (13); DEM (10); Multiphysics (10);
Main Referenced Unit & Research Centers
ULHPC - University of Luxembourg: High Performance Computing (40)
LuXDEM - University of Luxembourg: Luxembourg XDEM Research Centre (32)
RUES (3)
Luxembourg Centre for Systems Biomedicine (LCSB): Experimental Neurobiology (Balling Group) (2)
LuXDEM - Luxembourg XDEM Research Centre (1)
Main Referenced Disciplines
Mechanical engineering (86)
Materials science & engineering (74)
Chemical engineering (72)
Computer science (68)
Energy (42)

Publications (total 231)

The most downloaded
855 downloads
Peters, B. (2013). The extended discrete element method (XDEM) for multi-physics applications. Scholarly Journal of Engineering Research. https://hdl.handle.net/10993/5989

The most cited

298 citations (Scopus®)

Peters, B., & Dziugys, A. (2001). An approach to simulate the motion of spherical and non-spherical fuel particles in combustions chambers. Granular Matter, 3, 231-265. doi:10.1007/pl00010918 https://hdl.handle.net/10993/6007

ADHAV, P., Feng, Z., Ni, T., PETERS, B., & Fan, X. (2024). Numerical insights into rock–ice avalanche geophysical flow mobility through CFD–DEM simulation. Computational Particle Mechanics. doi:10.1007/s40571-023-00699-3
Peer reviewed

BESSERON, X., ADHAV, P., & PETERS, B. (2024). Parallel Multi-Physics Coupled Simulation of a Midrex Blast Furnace. Conference on High Performance Computing in Asia-Pacific Region Workshops (HPCAsiaWS 2024). doi:10.1145/3636480.3636484
Peer reviewed

ADHAV, P., BESSERON, X., & PETERS, B. (November 2023). Investigation of CFD-DEM-FEM momentum coupling results for AWJC Nozzle using preCICE [Paper presentation]. NAFEMS Multiphysics Conference 2023, Munich, Germany.
Editorial reviewed

ADHAV, P., BESSERON, X., & PETERS, B. (10 October 2023). 6-way CFD-DEM-FEM partitioned momentum coupling using preCICE [Paper presentation]. PARTICLES 2023 Conference VIII International Conference on Particle-Based Methods, Milan, Italy.
Editorial reviewed

ADHAV, P., BESSERON, X., & PETERS, B. (06 October 2023). 6-way CFD-DEM-FEM partitioned momentum coupling using preCICE [Paper presentation]. International Conference on Data-Integrated Simulation Science (SimTech2023), Stuttgart, Germany.
Editorial reviewed

HASSANZADEH SARAEI, S., & PETERS, B. (August 2023). Immersed boundary method for considering lubrication effects in the CFD-DEM simulations. Powder Technology, 426, 118603. doi:10.1016/j.powtec.2023.118603
Peer Reviewed verified by ORBi

Peters, B. (22 June 2023). A Transient And Highly Resolving Multiphase Approach For Blast Furnaces Based On The XDEM Technology [Paper presentation]. 19th Multiphase Flow Conference and Short Course: Simulation, Experiment and Application.

Besseron, X., Adhav, P., Louw, D. L., & Peters, B. (01 June 2023). Toward High-Performance Multi-Physics Coupled Simulations for the Industry with XDEM [Paper presentation]. 1st conference Math 2 Product (M2P) on Emerging Technologies in Computational Science for Industry, Sustainability and Innovation, Taormina, Italy.

BESSERON, X., PETERS, B., & ADHAV, P. (June 2023). Investigation of CFD-DEM momentum coupling results for AWJC Nozzle using preCICE [Paper presentation]. COUPLED PROBLEMS 2023, International Conference of Computational Methods for Coupled Problems in Science and Engineering, Crete, Greece.
Editorial reviewed

ADHAV, P., BESSERON, X., & PETERS, B. (March 2023). 6-way CFD-DEM-FEM momentum & HMT coupling using preCICE [Paper presentation]. Computational Fluid Dynamics und Wärme- und Stoffübertragung, Frankfurt, Germany.
Editorial reviewed

Aminnia, N., Adhav, P., Darlik, F., Mashhood, M., Hassanzadeh Saraei, S., Besseron, X., & Peters, B. (15 February 2023). Three-dimensional CFD-DEM simulation of raceway transport phenomena in a blast furnace. Fuel, 334 (2). doi:10.1016/j.fuel.2022.126574
Peer Reviewed verified by ORBi

Adhav, P., Besseron, X., & Peters, B. (14 February 2023). Investigation of OpenFOAM-XDEM momentum coupling results for AWJC Nozzle using preCICE [Paper presentation]. preCICE Workshop 2023, Munich, Germany.

Mashhood, M., Peters, B., Zilian, A., Baroli, D., & Wyart, E. (2023). Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process. Journal of Mechanical Science and Technology. doi:10.1007/s12206-022-2106-2
Peer Reviewed verified by ORBi

Darlik, F., & Peters, B. (2023). Reconstruct the biomass particles fields in the particle-fluid problem using continuum methods by applying the physics-informed neural network. Results in Engineering, 17, 100917. doi:10.1016/j.rineng.2023.100917
Peer reviewed

Aminnia, N., Estupinan Donoso, A. A., & Peters, B. (2022). Developing a DEM-Coupled OpenFOAM solver for multiphysics simulation of additive manufacturing process. Scipedia.com. doi:10.23967/eccomas.2022.084
Peer reviewed

Hassanzadeh Saraei, S., & Peters, B. (30 August 2022). Implementing a hybrid immersed boundary/fictitious domain (HFD-IB) method coupled with the Discrete Element Method (DEM) to consider lubrication effects between the particles in the fluid domain [Paper presentation]. IUTAM symposium "From Stokesian suspension dynamics to particulate flows in turbulence", Toulouse, France.

Mainassara Chekaraou, A. W., Besseron, X., Rousset, A., Qi, F., & Peters, B. (2022). Local Verlet buffer approach for broad-phase interaction detection in Discrete Element Method. ORBilu-University of Luxembourg. https://orbilu.uni.lu/handle/10993/42706. doi:10.48550/arXiv.2208.13770

Besseron, X., Rusche, H., & Peters, B. (2022). Parallel Multi-Physics Simulation of Biomass Furnace and Cloud-based Workflow for SMEs. In Practice and Experience in Advanced Research Computing (PEARC '22). New York, NY, United States: Association for Computing Machinery. doi:10.1145/3491418.3530294
Peer reviewed

Peters, B., Besseron, X., & Estupinan Donoso, A. A. (July 2022). Analysis of Coke Particle Gasification in the Raceway of a Blast Furnace. IFAC-PapersOnLine, 55 (20), 277-282. doi:10.1016/j.ifacol.2022.09.108
Peer Reviewed verified by ORBi

Peters, B., Besseron, X., Peyraut, A., Mehl, M., & Ueckermann, B. (2022). An Innovative Partitioning Technology for Coupled Software Modules. In Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - SIMULTECH (pp. 186-193). doi:10.5220/0011135200003274
Peer reviewed

Besseron, X., Henrik, R., & Peters, B. (09 June 2022). Development of an HPC Multi-Physics Biomass Furnace Simulation and Integration in a Cloud-based Workflow [Paper presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway.

Adhav, P., Besseron, X., Estupinan Donoso, A. A., Peters, B., & Rousset, A. (09 June 2022). HEAT AND MASS TRANSFER BETWEEN XDEM & OPENFOAM USING PRECICE COUPLING LIBRARY [Paper presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering, OVA Spektrum, Lillestrøm, Norway.

Mashhood, M., Baroli, D., Wyart, E., Zilian, A., & Peters, B. (31 May 2022). MATERIAL MODELLING AND FINITE ELEMENT ANALYSIS IN METAL ADDITIVE MANUFACTURING [Poster presentation]. 20th PLANSEE Seminar, International Conference on Refractory Metals and Hard Materials, Reutte, Austria.

Estupinan Donoso, A. A., Aminnia, N., Peters, B., & Michels, A. (31 May 2022). On the Reduction of Computational Costs for Tungsten Powder Bed Processes [Paper presentation]. 20 Plansee seminar, Reutte, Austria.

Aminnia, N., Estupinan Donoso, A. A., & Peters, B. (31 May 2022). CFD-DEM simulation of melt pool formation and evolution in powder bed fusion process [Poster presentation]. 20 Plansee seminar, Reutte, Austria.

Amani, H., Alamdari, E. K., Peters, B., & Estupinan Donoso, A. A. (12 March 2022). XDEM study of burden distribution in iron ore pellet firing. Ironmaking and Steelmaking, 49 (6), 615-625. doi:10.1080/03019233.2022.2036084
Peer reviewed

Mashhood, M., Zilian, A., Peters, B., Baroli, D., & Wyart, E. (05 February 2022). THE EVOLUTION OF THERMAL DISTORTION AND STRESSES AT MACRO SCALE FOR METAL ADDITIVELY MANUFACTURED PART [Paper presentation]. 2nd Workshop on Structural Integrity of Additively Manufactured Materials - SIAMM22.

Darlik, F., Adhav, P., & Peters, B. (2022). Prediction of the biomass particles through the physics informed neural network. ECCOMAS Congress 2022 - 8th European Congress on Computational Methods in Applied Sciences and Engineering. doi:10.23967/eccomas.2022.223
Peer reviewed

Mashhood, M., Baroli, D., Wyart, E., Zilian, A., & Peters, B. (27 October 2021). Thermo-mechanical modelling for metal additive manufacturing [Paper presentation]. NAFEMS World Congress (NWC2021).

Peters, B., Rousset, A., & Besseron, X. (October 2021). Analysis of a blast furnace behaviour through a resolving euler-lagrange approach [Paper presentation]. 9th international conference on modeling and simulation of metallurgical processes in steelmaking (STEEL SIM 2021).

Adhav, P., Besseron, X., ROUSSET, A., & Peters, B. (16 June 2021). AWJC Nozzle simulation by 6-way coupling of DEM+CFD+FEM using preCICE coupling library [Paper presentation]. 9th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2021).

Kabore, B. W., Peters, B., Michael, M., & Francois, N. (07 April 2021). A Discrete Element Framework for Modeling the Mechanical Behaviour of Snow PART I: Mechanical Behaviour and Numerical Model. Granular Matter, 23 (2), 42. doi:10.1007/s10035-020-01083-1
Peer Reviewed verified by ORBi

Peters, B., Kabore, B. W., Mark, M., & Francois, N. (07 April 2021). A Discrete Element Framework for Modeling the Mechanical Behaviour of Snow PART II: Model Validation. Granular Matter, 23 (2), 43. doi:10.1007/s10035-020-01084-0
Peer Reviewed verified by ORBi

Ojeda-May, P., Eriksson, J., Rousset, A., Besseron, X., Mainassara Chekaraou, A. W., & Peters, B. (2021). OpenMP optimisation of the eXtended Discrete Element Method (XDEM). Partnership for Advanced Computing in Europe.

Adhav, P., Besseron, X., Rousset, A., & Peters, B. (23 February 2021). Evaluation of erosion inside AWJC Nozzle by 6-way coupling of DEM+CFD+FEM using preCICE [Paper presentation]. preCICE Workshop 2021, Germany.

Amani, H., Alamdari, E. K., Ale Ebrahim, H., Estupinan Donoso, A. A., & Peters, B. (2021). Mathematical modeling of thermal behavior of single iron ore pellet during heat hardening oxidation. Journal of Thermal Analysis and Calorimetry. doi:10.1007/s10973-020-10532-1
Peer reviewed

Mashhood, M., Baroli, D., Zilian, A., & Peters, B. (13 January 2021). Thermo-mechanical coupling and part-level analysis for additive manufacturing processes [Paper presentation]. 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020.

Besseron, X., Rousset, A., Peyraut, A., & Peters, B. (2021). Eulerian-Lagrangian momentum coupling between XDEM and OpenFOAM using preCICE. In 14th WCCM & ECCOMAS Congress 2020.
Peer reviewed

Peters, B., Rousset, A., Besseron, X., Mainassara Chekaraou, A. W., Gallo, M. G., Sansone, F., Lupi, A., & Galleti, C. (2020). Process analysis in thermal process engineering with high-performance computing using the example of grate firing. In V. Scherer, N. Fricker, ... A. Reis (Eds.), Proceedings of the 12th European Conference on Industrial Furnaces and Boilers.
Peer reviewed

Besseron, X., Rusche, H., Peters, B., Rousset, A., Lukoševičius, R., Paukštaitis, L., & Narbutas, L. (November 2020). HPC Multi-physics Biomass Furnace simulations as a Service [Paper presentation]. 11th International SuperComputing Camp 2020.

Kolodkin, A., Colangelo, A., Ignatenko, A., Martorana, F., Jennen, D., Briedé, J., Brady, N., Barberis, M., Mondeel, T., Papa, M., Kumar, V., Peters, B., Skupin, A., Alberghina, L., Balling, R., & Westerhoff, H. (2020). ROS networks: designs, aging, Parkinson's disease and precision therapies. NPJ Systems Biology and Applications. doi:10.1038/s41540-020-00150-w
Peer Reviewed verified by ORBi

Rusche, H., Peters, B., Besseron, X., Rousset, A., Lukoševičius, R., Paukštaitis, L., & Narbutas, L. (14 October 2020). Lowering the obstacles for SMEs to adopt multi-physics biomass furnace simulations by providing a cloud based solution [Paper presentation]. 8th OpenFOAM Conference.

Loew, P. J., Poh, L. H., Peters, B., & Beex, L. (01 October 2020). Accelerating fatigue simulations of a phase-field damage model for rubber. Computer Methods in Applied Mechanics and Engineering, 370 (113247). doi:10.1016/j.cma.2020.113247
Peer Reviewed verified by ORBi

Rousset, A., Mainassara Chekaraou, A. W., Besseron, X., Peters, B., & Galletti. (31 August 2020). Numerical Analysis of Interaction between a Reacting Fluid and a Moving Bed with Spatially and Temporally Fluctuating Porosity [Paper presentation]. Interpore2020, Qingdao, China.

Besseron, X., Rousset, A., Mainassara Chekaraou, A. W., & Peters, B. (18 June 2020). Parallel coupling strategy for multi-physics applications in eXtended Discrete Element Method [Paper presentation]. HPC Knowledge Meeting '20, Barcelona, Spain.

Mainassara Chekaraou, A. W., Besseron, X., Rousset, A., Kieffer, E., & Peters, B. (2020). Predicting near-optimal skin distance in Verlet buffer approach for Discrete Element Method. In 10th IEEE Workshop on Parallel / Distributed Combinatorics and Optimization. doi:10.1109/IPDPSW50202.2020.00093
Peer reviewed

Mainassara Chekaraou, A. W., Rousset, A., Besseron, X., Peters, B., Galletti, C., Gallo, M. G. (Other coll.), & Sansone, F. (Other coll.). (27 April 2020). Detailed Numerical Three-dimensional and Transient Analysis of a Grate Firing Combustion Process by Innovative High Performance Computing [Paper presentation]. 28th European Biomass Conference and Exhibition (e-EUBCE 2020).

Besseron, X., Rousset, A., Peyraut, A., & Peters, B. (February 2020). 6-way coupling of DEM+CFD+FEM with preCICE [Paper presentation]. preCICE Workshop 2020, Germany.

Loew, P. J., Peters, B., & Beex, L. (2020). Fatigue phase-field damage modeling of rubber using viscous dissipation: Crack nucleation and propagation. Mechanics of Materials, 142. doi:10.1016/j.mechmat.2019.103282
Peer Reviewed verified by ORBi

Qi, F., Kiesgen de Richter, S., Jenny, M., & Peters, B. (2020). DEM simulation of dense granular flows in a vane shear cell: Kinematics and rheological laws. Powder Technology. doi:10.1016/j.powtec.2020.03.008
Peer Reviewed verified by ORBi

Bordas, S., Peters, B., Viti, F., & Zilian, A. (2019). Data Centric Engineering and Data-Driven Modelling - Computational Engineering Lab Report 2019. (Report number 7 - 2019). Luxembourg, Luxembourg: UL.

Wu, M., Peters, B., Rosemann, T., & kruggel-emden, H. (01 October 2019). A Forcing Fictitious Domain Method to Simulate Fluid-particle Interaction of Particles with Super-quadric Shape. Powder Technology, 360 (15/January 2020), 264-277. doi:10.1016/j.powtec.2019.09.088
Peer Reviewed verified by ORBi

Kabore, B. W., & Peters, B. (2019). Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part II: validation. International Journal of Solids and Structures. doi:10.1016/j.ijsolstr.2019.08.036
Peer Reviewed verified by ORBi

Kabore, B. W., & Peters, B. (2019). Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Model and calibration. International Journal of Solids and Structures. doi:10.1016/j.ijsolstr.2019.08.038
Peer Reviewed verified by ORBi

Mainassara Chekaraou, A. W., Rousset, A., Besseron, X., Qi, F., & Peters, B. (26 July 2019). Verlet buffer for broad-phase interaction detection in Discrete Element Method [Paper presentation]. 8th International Conference on Discrete Element Methods, Twente, Netherlands.

Rosemann, T., Kruggel-Emden, H., Wu, M., & Peters, B. (15 July 2019). Comparison of numerical schemes for 3D Lattice Boltzmann simulations of moving rigid particles in thermal fluid flows. Powder Technology, 356 (3), 528-546. doi:10.1016/j.powtec.2019.07.054
Peer Reviewed verified by ORBi

Besseron, X., Pozzetti, G., Rousset, A., Mainassara Chekaraou, A. W., & Peters, B. (21 June 2019). High Performance Parallel Coupling of OpenFOAM+XDEM [Paper presentation]. UL HPC School - June 2019 - User Session, Luxembourg, Luxembourg.

Kabore, B. W., Loew, P. J., & Peters, B. (13 June 2019). Phase field fracture model for viscoplastic materials in large deformations [Paper presentation]. Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019).

Besseron, X., Pozzetti, G., Rousset, A., Mainassara Chekaraou, A. W., & Peters, B. (05 June 2019). Co-located Partitioning Strategy and Dual-grid Multiscale Approach for Parallel Coupling of CFD-DEM Simulations [Paper presentation]. 8th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019), Sitges, Spain.

Wu, M., Peters, B., & Dressler, I. (2019). A forcing fictitious domain/immersed boundary method for super-quadric shape of particulate flow simulation of cementitious material. In International Centre for NumericalMethods in Engineering. Barcelona, Spain: Artes Gráficas Torres S.L., Huelva 9, 08940 Cornellà de Llobregat.
Peer reviewed

Kabore, B. W., & Peters, B. (09 April 2019). Integrated micromechanical model for slope stability analysis [Paper presentation]. European Geosciences Union General Assembly 2019, Vienna, Austria.

Wu, M., Peters, B., Rosemann, T., & Kruggel-Emden, H. (2019). An interface resolved immersed boundary method in XDEM for particulate flow simulations. International Congress on Particle Technology.
Peer reviewed

Rosemann, T., Kravets, B., Kruggel-Emden, H., Wu, M., & Peters, B. (2019). Comparison of boundary treatments in thermal Lattice Boltzmann simulations of moving particles in fluids. Particle Technology Series.
Peer reviewed

Pozzetti, G., Jasak, H., Besseron, X., Rousset, A., & Peters, B. (February 2019). A parallel dual-grid multiscale approach to CFD-DEM couplings. Journal of Computational Physics, 378, 708-722. doi:10.1016/j.jcp.2018.11.030
Peer Reviewed verified by ORBi

Kabore, B. W., & Peters, B. (2019). Simulation-based Optimisation Of Selective Laser Sintering/Melting Process. In Euro PM2019 Congress Proceedings.
Peer reviewed

Kabore, B. W., Estupinan Donoso, A. A., Peters, B., & Baroli, D. (2019). Identification of optimal process parameters in selective laser sintering [Paper presentation]. II International Conference on Simulation for Additive Manufacturing - Sim-AM 2019, Pavia, Italy.

Peters, B., Baniasadi, M., Baniasadi, M., Besseron, X., Estupinan Donoso, A. A., Mohseni, S., & Pozzetti, G. (2019). The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications. Particuology, 44, 176 - 193. doi:10.1016/j.partic.2018.04.005
Peer Reviewed verified by ORBi

Loew, P. J., Peters, B., & Beex, L. (2019). Rate-dependent phase-field damage modeling of rubber and its experimental parameter identification. Journal of the Mechanics and Physics of Solids. doi:10.1016/j.jmps.2019.03.022
Peer Reviewed verified by ORBi

Copertaro, E., Estupinan Donoso, A. A., & Peters, B. (04 December 2018). A Discrete-Continuous Method for Predicting Thermochemical Phenomena in a Cement Kiln and Supporting Indirect Monitoring. Engineering Journal, 22 (6), 165-183. doi:10.4186/ej.2018.22.6.165
Peer reviewed

Baniasadi, M., & Peters, B. (25 September 2018). SOFTENING AND MELTING MODELING OF IRON ORE PARTICLES USING A CFD-DEM COUPLING METHOD [Paper presentation]. 8th International Congress on Science and technology of ironmaking - ICSTI 2018.

Mainassara Chekaraou, A. W., Rousset, A., Besseron, X., & Peters, B. (24 September 2018). Verlet buffer for broad phase interaction detection in Discrete Element Method [Poster presentation]. 30th International Symposium on Computer Architecture and High Performance Computing, Lyon - École Normale Supérieure, France.

Pozzetti, G., Besseron, X., Rousset, A., & Peters, B. (2018). A co-located partitions strategy for parallel CFD-DEM couplings. Advanced Powder Technology. doi:10.1016/j.apt.2018.08.025
Peer Reviewed verified by ORBi

Mainassara Chekaraou, A. W., Rousset, A., Besseron, X., Varrette, S., & Peters, B. (2018). Hybrid MPI+OpenMP Implementation of eXtended Discrete Element Method. In Proc. of the 9th Workshop on Applications for Multi-Core Architectures (WAMCA'18), part of 30th Intl. Symp. on Computer Architecture and High Performance Computing (SBAC-PAD 2018). Lyon, France, Unknown/unspecified: IEEE Computer Society.
Peer reviewed

Kabore, B. W., Peters, B., Willibald, C., Theile, T., & Schneebeli, M. (2018). MULTI-SCALE MODELLING OF SNOW MECHANICS. In 41st Solid Mechanics Conference.
Peer reviewed

Besseron, X., Pozzetti, G., Rousset, A., & Peters, B. (20 August 2018). Parallel Coupling of CFD-DEM simulations [Paper presentation]. Visit at Texas Advanced Computing Center (TACC), Austin, TX, United States.

Estupinan Donoso, A. A., & Peters, B. (2018). Why Do Discrete Element Analysis? (Ellis, D. and Prinja, N). NAFEMS.

Kabore, B. W., & Peters, B. (2018). Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Theory. ORBilu-University of Luxembourg. https://orbilu.uni.lu/handle/10993/39054.

Baniasadi, M., & Peters, B. (August 2018). Experimental and numerical investigation into the softening Behavior of a packed bed of iron ore pellets. Powder Technology, 339, 863-871. doi:10.1016/j.powtec.2018.08.035
Peer Reviewed verified by ORBi

Pozzetti, G., Besseron, X., Rousset, A., & Peters, B. (August 2018). Parallel Coupling of CFD-DEM simulations [Paper presentation]. 6th MVAPICH User Group (MUG'18) Meeting, Columbus, OH, United States.

Peters, B., Maryam, B., & Baniasadi, M. (2018). The Extented Discrete Element Method (XDEM): An Advanced Approach to Model Blast Furnace. In Iron Ores and Iron Oxide Materials (pp. 125). InTech.
Peer reviewed

Rousset, A., Mainassara Chekaraou, A. W., Liao, Y.-C., Besseron, X., Varrette, S., & Peters, B. (2018). Comparing Broad-Phase Interaction Detection Algorithms for Multiphysics DEM Applications. In AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM). New York, United States - New York: American Institute of Physics. doi:10.1063/1.5043900
Peer reviewed

Pozzetti, G., Besseron, X., Rousset, A., Mainassara Chekaraou, A. W., & Peters, B. (2018). On the performance of an overlapping-domain parallelization strategy for Eulerian-Lagrangian Multiphysics software. In AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM). New York, United States - New York: American Institute of Physics. doi:10.1063/1.5043895
Peer reviewed

Kabore, B. W., & Peters, B. (04 July 2018). Bonded Particle Model for Numerical Analysis of Concrete Fracture under Impact Loading [Paper presentation]. 8th IC-SCCE.

Baniasadi, M., Baniasadi, M., & Peters, B. (13 June 2018). Softening and melting modeling of iron ore particles using a discrete - continuous coupling method [Paper presentation]. 6th European Conference on Computational Mechanics (ECCM 6) 7th European Conference on Computational Fluid Dynamics (ECFD 7).

Estupinan Donoso, A. A., & Peters, B. (2018). Exploring a Multiphysics Resolution Approach for Additive Manufacturing. JOM. doi:10.1007/s11837-018-2964-3
Peer reviewed

Baniasadi, M., Baniasadi, M., Peters, B., & Besseron, X. (25 April 2018). Application of eXtedned Discrete Element Method to the melting process of a packed of particles [Paper presentation]. 8th World Congress on Particle Technology, Orlando, FL, United States.

Baniasadi, M., Peters, B., Baniasadi, M., & Besseron, X. (2018). Hydrodynamic Analysis of Gas-Liquid-Liquid-Solid Reactors using the XDEM Numerical Approach. Canadian Journal of Chemical Engineering. doi:10.1002/cjce.23191
Peer Reviewed verified by ORBi

Pozzetti, G., & Peters, B. (09 January 2018). A Multiscale DEM-VOF Method for the simulation of three-phase flows. International Journal of Multiphase Flow, 99, 186-204. doi:10.1016/j.ijmultiphaseflow.2017.10.008
Peer Reviewed verified by ORBi

Introini, C., Cammi, A., Lorenzi, S., Baroli, D., & Peters, B. (2018). Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactor. Journal of Nuclear Engineering and Radiation Science.
Peer reviewed

Introini, C., Cammi, A., Lorenzi, S., Baroli, D., & Peters, B. (2018). Development of a Data-Driven Approach based on Kalman filtering for CFD Reactor Analysis. PHYSOR 2018.
Peer reviewed

Pozzetti, G., & Peters, B. (2018). A Numerical approach for the evaluation of particle-induced erosion in an Abrasive Waterjet focusing tube. Powder Technology. doi:10.1016/j.powtec.2018.04.006
Peer Reviewed verified by ORBi

Beex, L., Bordas, S., Hale, J., Peters, B., & Zilian, A. (2018). ECCOMAS Newsletter - Computational and Data Sciences in Luxembourg.

Pozzetti, G., Besseron, X., Rousset, A., & Peters, B. (2018). A Parallel Multiscale DEM-VOF Method For Large-Scale Simulations Of Three-Phase Flows. Proceedings of ECCM-ECFD 2018.
Peer reviewed

Copertaro, E., Estupinan Donoso, A. A., & Peters, B. (2018). A comparison between discrete analysis and a multiphase approach for predicting heat conduction in packed beds. In Proceedings of the 10th International Conference on Computer Modeling and Simulation. doi:10.1145/3177457.3177497
Peer reviewed

Baniasadi, M., Baniasadi, M., & Peters, B. (2017). Coupled CFD-DEM with Heat and Mass transfer to Investigate the Melting of a Granular Packed Bed. Chemical Engineering Science. doi:10.1016/j.ces.2017.12.044
Peer reviewed

Peters, B., Pozzetti, G., & Baniasadi, M. (11 October 2017). Numericl Analysis of the Fluiddynamic Interaction between Carrier Gas and Powder [Paper presentation]. The 1st ECCOMAS Thematic Conference on Simulation for Additive Manufacturing.

Baniasadi, M., & Peters, B. (2017). Resolving Multiphase Flow through Packed Bed of Solid Particles Using eXtended Discrete Element Method with Porosity Calculation. Industrial and Engineering Chemistry. doi:10.1021/acs.iecr.7b02903

Baniasadi, M., Baniasadi, M., & Peters, B. (28 September 2017). A CFD–DEM approach coupled with heat transfer for the melting process of a packed of particles [Paper presentation]. PARTICLES 2017.

Kabore, B. W., & Peters, B. (27 September 2017). Multiscale model of sintering: diffusion and plastic flow [Paper presentation]. Particle 2017.

Willivald, C., Kabore, B. W., Szabó, D., Schneebeli, M., & Peters, B. (26 September 2017). Dynamic Sintering of a High Temperature Granular Material: Experiments and Simulations [Paper presentation]. PARTICLES 2017, Hanover, Germany.

Baniasadi, M., & Peters, B. (13 September 2017). Preliminary investigation on the capability of eXtended Discrete Element method for treating the dripping zone of a blast furnace. ISIJ International, 58 (1). doi:10.2355/isijinternational.ISIJINT-2017-344
Peer Reviewed verified by ORBi

Mohseni, M., Peters, B., & Baniasadi, M. (September 2017). Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approach. Case Studies in Thermal Engineering, 10. doi:10.1016/j.csite.2017.08.004
Peer reviewed

Rousset, A., Besseron, X., & Peters, B. (September 2017). Parallelizing XDEM: Load-balancing policies and efficiency, a study [Paper presentation]. International Conference on Particle-Based Methods (PARTICLES17), Hannover, Germany.

Peters, B., & Pozzetti, G. (30 June 2017). Flow characteristics of metallic powder grains for additive manufacturing. EPJ Web of Conferences, 13001, 140. doi:10.1051/epjconf/201714013001
Peer reviewed

Baniasadi, M., Peters, B., & Baniasadi, M. (20 June 2017). Model Study of Multiphase Flow Through Packed Particles by eXtended Discrete Element Method (XDEM) [Paper presentation]. 9th International Conference on Computational and Experimental Methods in Multiphase and Complex Flow, Tallin, Estonia.

Baniasadi, M., & Peters, B. (08 May 2017). Investigating Multiphase flow Behavior in Trickle Bed Reactors using eXtended Discrete Element Method (XDEM) [Paper presentation]. InterPORE, Rotterdam, Netherlands.

Pozzetti, G., & Peters, B. (2017). Multiscale-multiphysics approaches for engineering applications. AIP Conference Proceedings, 1863 (1), 180001. doi:10.1063/1.4992361
Peer Reviewed verified by ORBi

Pozzetti, G., & Peters, B. (2017). On the choice of a phase interchange strategy for a multiscale DEM-VOF Method. AIP Conference Proceedings, 1863. doi:10.1063/1.4992362
Peer Reviewed verified by ORBi

Introini, C., Baroli, D., & Peters, B. (2017). Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactor [Poster presentation]. 26-th Conference for Nuclear Energy for New Europe, Blad, Slovenia.

Pozzetti, G., & Peters, B. (2017). Evaluating Erosion Patterns in an abrasive water jet cutting nozzle using XDEM. Advances in Powder Metallurgy & Particulate Materials, 191-205.
Peer reviewed

Pozzetti, G., & Peters, B. (2017). LES-VOF SIMULATIONS OF A PURE WATER JET DEVELOPING INSIDE AN AWJC NOZZLE: PRELIMINARY OBSERVATIONS AND GUIDELINES. Proceedings of 2017 WJTA-IMCA.
Peer reviewed

Baniasadi, M., Baniasadi, M., & Peters, B. (2016). Application of the extended discrete element method (XDEM) in the melting of a single particle. In M. Baniasadi, Application of the extended discrete element method (XDEM) in the melting of a single particle. doi:10.1063/1.4992363

Pozzetti, G., & Peters, B. (06 June 2016). ON THE INFLUENCE OF DIFFERENT MAPPING TECHNIQUES FOR A MULTISCALE APPROACH TO TURBULENT THREE-PHASE FLOWS [Paper presentation]. ECCOMAS2016.

Baniasadi, M., & Peters, B. (05 June 2016). CFD-XDEM FOR PREDICTING MULTIPHASE FLOW BEHAVIOR THROUGH POROUS MEDIA [Paper presentation]. European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.

Pozzetti, G., & Peters, B. (26 May 2016). A DEM-LES-VOF METHOD FOR TURBULENT THREE PHASE FLOWS [Paper presentation]. 9th International Conference on Multiphase Flow (ICMF2016).

Peters, B., & Pozzetti, G. (22 May 2016). A PRELIMINARY STUDY ON THE STABILITY OF PARTICLE LADEN JETS THROUGH A FULLY COUPLED CFD-DEM SOLVER [Poster presentation]. ICMF2016 International Conference on Multiphase Flow. doi:10.13140/RG.2.1.2183.0003

Peters, B., Hoffmann, F., Senk, D., Babich, A., Hausemer, L., & Simoes, J.-P. (2016). A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide. LA METALLURGIA ITALIANA, (3), 49-54.
Peer reviewed

Peters, B., Pozzetti, G., & Liao, Y.-C. (2016). Berechnung des Transportes von Treibgut bei Hochwasser. In 39. DRESDNER WASSERBAUKOLLOQUIUM.

Mahmoudi, A. H., Besseron, X., Hoffmann, F., Markovic, M., & Peters, B. (2016). Modeling of the biomass combustion on a forward acting grate using XDEM. Chemical Engineering Science, 142, 32-41. doi:10.1016/j.ces.2015.11.015
Peer Reviewed verified by ORBi

Copertaro, E., Chiariotti, P., Estupinan Donoso, A. A., Paone, N., Peters, B., & Revel, G. M. (2016). XDEM for Tuning Lumped Models of Thermochemical Processes Involving Materials in the Powder State. Engineering Journal, 20 (5), 187-201. doi:10.4186/ej.2016.20.5.187
Peer reviewed

Mahmoudi, A. H., Hoffmann, F., Peters, B., & Besseron, X. (2016). Numerical study of the influence of particle size and packing on pyrolysis products using XDEM. International Communications in Heat and Mass Transfer, 71, 20-34. doi:10.1016/j.icheatmasstransfer.2015.12.011
Peer Reviewed verified by ORBi

Emeras, J., Besseron, X., Varrette, S., Bouvry, P., & Peters, B. (2016). HPC or the Cloud: a cost study over an XDEM Simulation. In Proc. of the 7th International Supercomputing Conference in Mexico (ISUM 2016).
Peer reviewed

Besseron, X., & Peters, B. (16 June 2015). XDEM: eXtended Discrete Element Method [Paper presentation]. Workshop on HPC Collaboration between Europe and Latin America, at ISC High Performance International Conference (ISC 2015).

Estupinan Donoso, A. A., Peters, B., Copertaro, E., Chiariotti, P., Paone, N., & Revel, G. M. (May 2015). A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditions. Powder Technology, 275, 131-138. doi:10.1016/j.powtec.2015.01.072
Peer Reviewed verified by ORBi

Estupinan Donoso, A. A., & Peters, B. (27 April 2015). XDEM Used for Predicting Tungsten-Oxide Reduction [Paper presentation]. Computer Aided Process Engineering (CAPE) Forum 2015, Paderborn, Germany.

Besseron, X., Plugaru, V., Mahmoudi, A. H., Varrette, S., Peters, B., & Bouvry, P. (2015). Performance Evaluation of the XDEM framework on the OpenStack Cloud Computing Middleware. In Proceedings of the Fourth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Civil-Comp Press.
Peer reviewed

Peters, B., Besseron, X., Estupinan Donoso, A. A., Mahmoudi, A. H., & Mohseni, S. (2015). A discrete/continuous numerical approach to multi-physics. IFAC-PapersOnLine, 28 (1), 645-650. doi:10.1016/j.ifacol.2015.05.141
Peer Reviewed verified by ORBi

Peters, B., Hoffmann, F., Senk, D., Babich, A., Simoes, J., & Hausemer, L. (2015). Experimental and numerical investigation into iron ore reduction in packed beds. Chemical Engineering Science. doi:10.1016/j.ces.2015.09.017
Peer Reviewed verified by ORBi

Peters, B., Michael, M., & Nicot, F. (2015). A Discrete Approach to Describe the Elastic-plastic Behaviour of Snow. In Fourth Conference on Particle-Based Methods (PARTICLES 2015).
Peer reviewed

Peters, B., Hoffmann, F., Senk, D., Babich, A., Hausemer, L., & Simoes, J.-P. (2015). A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide. In SteelSim 2015, MODELLING and SIMULATION of METALLURGICAL PROCESSES in STEELMAKING.
Peer reviewed

Peters, B. (2015). The Extended Discrete Element Method (XDEM) as a Flexible and Advanced Tool in Multi-physics Applications. In 26th International Symposium on Transport Phenomena.
Peer reviewed

Peters, B. (2015). Multiskalenmodellierung für technische Anwendungen. In ECEMP 2015, European Centre for Emerging Materials and Processes.
Peer reviewed

Peters, B., Singhal, A., Besseron, X., Estupinan, A., Mahmoudi, A. H., & Mohseni, M. (2015). Assessing Heat Transfer Through Walls Of Packed Bed Reactors By An Innovative Particle-Resolved Approach. In 18th IFRF Member's Conference.
Peer reviewed

Copertaro, E., Chiariotti, P., Estupinan Donoso, A. A., Paone, N., Peters, B., & Revel, G. M. (2015). A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditions. Powder Technology, 275, 131-138. doi:10.1016/j.powtec.2015.01.072
Peer Reviewed verified by ORBi

Estupinan Donoso, A. A., & Peters, B. (2015). Predicting Tungsten Oxide Reduction with the Extended Discrete Element Method. Advances in Powder Metallurgy & Particulate Materials, (Proceedings of the 2015 International Conference on Powder Metallurgy Particulate Materials), 02.35--02.48.
Peer reviewed

Kolodkin, A., Ignatenko, A., Sangar, V., Simeonidis, V., Peters, B., Westerhoff, H., Skupin, A., Yilmaz, N., Barberis, M., Mondeel, T., Price, N., Brady, N., & Balling, R. (December 2014). ROS homeostasis in a dynamic model: How to save PD neuron? [Poster presentation]. Benelux Bioinformatics conference, Luxembourg, Luxembourg.

Kolodkin, A., Ignatenko, A., Sangar, V., Simeonidis, V., Glaab, E., Peters, B., Brady, N., Price, N., & Balling, R. (October 2014). ROS-management in Parkinson’s disease: Dynamic blue-print domino-based model and design principles study. Dynamic modelling of ROS management and ROS-induced mitophagy [Poster presentation]. GFG Neurogenetics Conference & PD Symposium, Munsbach, Luxembourg.

Kolodkin, A., Ignatenko, A., Peters, B., Matteo, B., & Hans, W. (September 2014). Mechanism-based model of ROS management in health and disease [Poster presentation]. Systems Biology-Systems Medicine School, Como, Italy.

Hadji-Minaglou, J.-R., Hoben, R., & Peters, B. (28 July 2014). Decentralized Power Supply for Small and Medium User Facilities.

Kolodkin, A., Ignatenko, A., Sangar, V., Simeonidis, V., Peters, B., Sahin, N., Price, N., Brady, N., Balling, R., & Westerhoff, H. (June 2014). ROS-activated signaling network: dynamic modelling and design principles study [Poster presentation]. Interdisciplinary Signalling Workshop, Vizegrad, Hungary.

Kolodkin, A., Ignatenko, A., Sangar, V., Glaab, E., Peters, B., Price, N., Brady, N., & Balling, R. (June 2014). Dynamic modelling of ROS management and ROS-induced mitophagy [Poster presentation]. Gordon workshop on Cell Death Mechanisms, West Dover, United States.

Ignatenko, A., Kolodkin, A., Peters, B., & Balling, R. (2014). Comparison of ODE-based models for reactive oxygen species regulation system. Proceedings of ICCSA 2014, 199-203.
Peer reviewed

Estupinan Donoso, A. A., & Peters, B. (2014). eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmosphere. In L. LLanes (Ed.), eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmosphere (pp. 179-180).
Peer reviewed

Mahmoudi, A. H., Hoffmann, F., & Peters, B. (March 2014). Detailed numerical modeling of pyrolysis in a heterogeneous packed bed using XDEM. Journal of Analytical and Applied Pyrolysis, 106, 9–20. doi:10.1016/j.jaap.2013.12.001
Peer Reviewed verified by ORBi

Peters, B., & Džiugys. (2014). Evaluation of heat transfer on a backward acting grate. MECHANIKA, 20, 24-34. doi:10.5755/j01.mech.20.1.3775

Peters, B., Besseron, X., Estupinan, A., Hoffmann, F., Michael, M. A. M., & Mohseni, M. (2014). Scale-Resolved Prediction of Pyrolysis in a Packed Bed by the Extended Discrete Element Method (XDEM). In The Ninth International Conference on Engineering Computational Technology.
Peer reviewed

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., Mahmoudi, A. H., & Vogel, F. (2014). Beschreibung des Transportes von Schwimmkörpern bei Flutwasser über eine Euler-Lagrange Kopplung. In Dresdner Wasserbauliche Mitteilungen.

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., & Mahmoudi, A. H. (2014). The extended discrete element method (XDEM) applied to drying of a packed bed. Industrial Combustion, 14, 1-16.
Peer Reviewed verified by ORBi

Peters, B., & Dzuigys, A. (2014). Transport Characteristics of Granular Matter on a Forward Acting Grate. In COST Action MP1305 Flowing Matter.
Peer reviewed

Mahmoudi, A. H., Hoffmann, F., & Peters, B. (01 January 2014). Application of XDEM as a novel approach to predict drying of a packed bed. International Journal of Thermal Sciences, 75, 65e75. doi:10.1016/j.ijthermalsci.2013.07.016
Peer Reviewed verified by ORBi

Peters, B., Dziugys, A., & Hunsinger, H. (2014). Experimental and Numerical Evaluation of the Residence Time Characteristics on a Forward Acting Grate. In Condensed Matter 2014.
Peer reviewed

Peters, B., Besseron, X., Estupinan, A., Hoffmann, F., Michael, M., Mahmoudi, A. H., & Mohseni, M. (2014). An Integral Approach to Multi-physics Application for Packed Bed Reactors. In 24th European Symposium on Computer Aided Process Engineering, ESCAPE 24.
Peer reviewed

Estupinan Donoso, A. A., & Peters, B. (2014). XDEM employed to predict reduction of tungsten oxide in a dry hydrogen atmosphere. International Journal of Refractory Metals and Hard Materials. doi:10.1016/j.ijrmhm.2014.08.012
Peer Reviewed verified by ORBi

Michael, M., Vogel, F., & Peters, B. (2014). XDEM - FEM Coupling Simulations of the Interactions between a Tire Tread and Granular Terrain. ORBilu-University of Luxembourg. https://orbilu.uni.lu/handle/10993/17044.

Michael, M., Peters, B., & Vogel, F. (2013). An Efficient 3D FEM - DEM Coupling for Granular Matter Applications. Coupled MBS-FE Applications: A New Trend in Simulation.

Michael, M., Peters, B., & Vogel, F. (2013). Simulation des Traktionsverhaltens von Reifen auf granularem Untergrund durch eine Kopplung zwischen der Finiten (FEM) und der Diskreten Element Methode (DEM). In VDI-Berichte "Reifen-Fahrwerk-Fahrbahn". Düsseldorf, Germany: VDI Verlag GmbH.
Peer reviewed

Kolodkin, A., Ignatenko, A., Sangar, V., Simeonidis, V., Peters, B., Brady, N., Price, N., & Balling, R. (27 September 2013). Design principles study of ROS management and ROS-induced mitophagy with a kinetic model [Poster presentation]. 2013 BMES Annual Meeting, Seattle, United States.

Peters, B., & Amir, M. (2013). Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungen. In 26. Deutscher Flammentag Verbrennung und Feuerung. Düsseldorf, Germany: VDI Verlag.
Peer reviewed

Michael, M., & Peters, B. (2013). 3D DEM – FEM Coupling to Analyse the Tractive Performance of Different Tire Treads in Soil. In S. Idelsohn, M. Papadrakakis, ... B. Schrefler (Eds.), Computational Methods for Coupled Problems in Science and Engineering V. Barcelona, Spain: CIMNE.
Peer reviewed

Kolodkin, A., Ignatenko, A., Simeonidis, V., Sangar, V., Choe, C., Peters, B., Price, N., Balling, R., & Brady, N. (May 2013). ROS-induced regulation of mitophagy and its failure in Parkinson’s disease [Poster presentation]. Mitochondria: from Signaling to Disease, Lisbon, Portugal.

Peters, B. (May 2013). The extended discrete element method (XDEM) for multi-physics applications. Scholarly Journal of Engineering Research, 2, 1-20.
Peer reviewed

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., & Mahmoudi, A. (2013). The Extended Discrete Element Method (XDEM) for Multi-Physics Applications. In Finnish-Swedish Flame Days 2013.
Peer reviewed

Hoffmann, F., & Peters, B. (2013). Extended Discrete Element Method (XDEM) to Model Heterogeneous Reactions in Packed Beds. In PARTEC - International Congress on Particle Technology.
Peer reviewed

Michael, M., Nicot, F., & Peters, B. (2013). Discrete Element Modeling of Inter-Granular Bonds between Snow Grains. In PARTEC - International Congress on Particle Technology.
Peer reviewed

Estupinan Donoso, A. A., Hoffmann, F., & Peters, B. (February 2013). eXtended Discrete Element Method used for convective heat transfer predictions. International Review of Mechanical Engineering, 7 (2), 329-336.
Peer Reviewed verified by ORBi

Peters, B., & Mahmoudi, A. H. (2013). Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungen. In 26. Deutscher Flammentag Verbrennung und Feuerung.
Peer reviewed

Peters, B., & Smula, J. (2013). A Numerical Approach to Predict Sulphur Dioxide Emissions During Switchgrass Combustion. Chemical and Process Engineering. doi:10.2478/cpe-2013-0011

Peters, B., Samiei, K., & Berhe, G. (2013). Numerical prediction of the bulk density of granular particles of di erent geometries. KONA Powder and Particle Journal. doi:10.14356/kona.2014017
Peer reviewed

Samiei, K., & Peters, B. (2013). Experimental and numerical investigation into the residence time distribution of granular particles on forward and reverse acting grate. Chemical Engineering Science. doi:10.1016/j.ces.2012.09.027
Peer Reviewed verified by ORBi

Peters, B. (2013). The extended discrete element method (XDEM) for multi-physics applications. Scholarly Journal of Engineering Research.
Peer reviewed

Peters, B. (2013). Multi-physikalische Anwendungen mit der Extended Discrete Element Method (XDEM) [Paper presentation]. Invited lecture.

Peters, B. (2013). Simulation von reagierenden Mehrphasen- strömungen mit der Extended Discrete Element Method (XDEM) [Paper presentation]. ERCOFTAC Technologietag.

Peters, B. (2013). The Extended Discrete Element Method (XDEM) for Multi-Physics Applications [Paper presentation]. Swedish-Finnish Flame Days 2013.

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., & Mahmoudi, A. H. (2013). Application of the Extended Discrete Element Method (XDEM) in Computer-Aided Process Engineering [Paper presentation]. CAPE Forum 2013 Computer Aided Process Engineering.

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., Mahmoudi, A. H., Dziugys, A., & Vogel, F. (2013). Die Extended Discrete Element Method (XDEM) für multiphysikalische Anwendungen [Paper presentation]. 31. CADFEM User Meeting.

Peters, B., Besseron, X., Estupinan Donoso, A. A., Hoffmann, F., Michael, M., & Mahmoudi, A. H. (2013). Enhanced Thermal Process Engineering by the Extended Discrete Element Method (XDEM). Universal Journal of Engineering Science, 1, 139-145.
Peer reviewed

Samiei, K., Peters, B., Bolten, M., & Frommer, A. (2013). Assessment of the potentials of implicit integration method in discrete element modelling of granular matter. Computers and Chemical Engineering. doi:10.1016/j.compchemeng.2012.10.009
Peer Reviewed verified by ORBi

Besseron, X., Hoffmann, F., Michael, M., & Peters, B. (2013). Unified Design for Parallel Execution of Coupled Simulations using the Discrete Particle Method. In Proceedings of the Third International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Stirlingshire, United Kingdom: Civil-Comp Press. doi:10.4203/ccp.101.49
Peer reviewed

Peters, B., & Dziugys, A. (2012). Heat transfer in Fixed and Moving Packed Beds Predicted by the Extended Discrete Element Method. In Advances in Industrial Heat Transfer. CRC Press. doi:10.1201/b12984-13
Peer reviewed

Peters, B. (2012). Energy and First Law of Thermodynamics. In Encyclopedia of Thermal Stress. Springer.
Peer reviewed

Peters, B. (2012). Simultaneous prediction of potassium chloride and sulphur dioxide emissions during combustion of switchgrass. Fuel. doi:10.1016/j.fuel.2011.12.073
Peer Reviewed verified by ORBi

Reis, L., Melas, D., Peters, B., & Zachary, D. (2012). Developing a fast photochemical calculator for an integrated assessment model. International Journal of Environment and Pollution. doi:10.1504/IJEP.2012.051188
Peer reviewed

Peters, B., Dziugys, A., & Navakas, R. (2012). A shrinking model for combustion gasification of char based on transport and reaction time scales. Mechanika. doi:10.5755/j01.mech.18.2.1564
Peer Reviewed verified by ORBi

Michael, M., Peters, B., & Vogel, F. (2012). Resolution of Different Length Scales by an Efficient Combination of the Finite Element Method and the Discrete Element Method. In B. H. V. Topping (Ed.), Proceedings of the Eleventh International Conference on Computational Structures Technology (pp. 249). Stirlingshire, United Kingdom: Civil-Comp Press. doi:10.4203/ccp.99.249
Peer reviewed

Peters, B., & Dziugys, A. (2011). Prediction of Conversion of a Packed Bed of Fuel Particles on a Forward Acting. Computer Aided Chemical Engineering. doi:10.1016/B978-0-444-54298-4.50157-4
Peer reviewed

Peters, B., Dzuigys, A., & Navakas, R. (2011). Simulation of Thermal Conversion of Solid Fuel By The Discrete Particle Method. Lithuanian Journal of Physics. doi:10.3952/lithjphys.51204
Peer reviewed

Peters, B. (2011). Prediction of pyrolysis of pistachio shells based on its components hemicellulose, cellulose and lignin. Fuel Processing Technology. doi:10.1016/j.fuproc.2011.05.023
Peer Reviewed verified by ORBi

Peters, B. (2011). Validation of a numerical approach to model pyrolysis of biomass and assessment of kinetic data. Fuel. doi:10.1016/j.fuel.2011.02.003
Peer Reviewed verified by ORBi

Peters, B. (2011). Application of a detailed reaction mechanism to pyrolysis of miscanthus giganteus. Journal of Analytical and Applied Pyrolysis. doi:10.1016/j.jaap.2011.03.013
Peer reviewed

Hoffmann, F., & Peters, B. (2011). An Integrated Approach to Model Blast Furnaces. In Proceedins: METEC InSteelCON 2011, Düsseldorf, Germany, CCD Congress Center Düsseldorf, 27th June - 1st July, 2011. Duesseldorf, Germany: Stahlinstitut VDEh.

Peters, B., & Smula, J. (2011). Evaluation of potassium chloride emissions applying the Discrete Particle Method (DPM). Computers and Chemical Engineering. doi:10.1016/j.compchemeng.2010.06.003
Peer Reviewed verified by ORBi

Peters, B., & Smula, J. (2011). Evaluation of potassium chlorine emissions applying the Discrete Particle Method (DPM). Energy and Fuels.

Peters, B., Zachary, D., Drouet, L., Leopold, U., & Aleluia Da Silva Reis, L. (2011). Trade-offs between energy cost and health impact in a regional coupled energy–air quality model: the LEAQ model. Environmental Research Letters.
Peer reviewed

Peters, B., & Raupenstrauch, R. (2010). Combustion Handbook. Wiley & Sons, in press, Unknown/unspecified: Winter,F.

Samiei, K., Peters, B., Bolten, M., & Frommer, A. (2010). An implicit approach to predict the dynamics of granular media. Abstract book of 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, 10 (1), 55-56. doi:10.1002/pamm.201010020
Peer reviewed

Peters, B., & Smula, J. (2010). Approach To Predict Emission of Sulfur Dioxide during Switchgrass Combustion Employing the Discrete Particle Method (DPM). Energy and Fuels, 2 (24), 945–953. doi:10.1021/ef901110k
Peer reviewed

Peters, B., Dziugys, A., & Navakas, R. (2010). A discrete approach to thermal conversion of solid fuel by the discrete particle method (dpm). Abstract book of 10th International Conference Modern Building Materials, Structures and Techniques.
Peer reviewed

Peters, B. (2009). An Approach to Visualise Tensor Fields in Engineering. Proceedings of Dagstuhl Seminar.
Peer reviewed

Aleluia Da Silva Reis, L., Zachary, D. S., Leopold, U., & Peters, B. (2009). Selecting a fast air quality calculator for an optimization meta-model. Monitoring and Management of Air Pollution.
Peer reviewed

Berhe, G., Peters, B., Varrette, S., & Bouvry, P. (2009). Parallel implementation of domain decomposition algorithm for molecular dynamics. In PARENG 2007 (pp. 1-19). Civil-Comp Press.
Peer reviewed

Peters, B., Dziugys, A., Hunsinger, H., & Lambert, K. (2007). Experimental and numerical evaluation of the transport behaviour of moving bed on a forward acting grate. Granular Matter, 9, 387-399. doi:10.1007/s10035-007-0064-0
Peer reviewed

Peters, B., Dzingys, A., Hunsinger, H., & Krebs, L. (2006). Evaluation of the residence time of a moving fuel bed on a forward acting grate. Granular Matter. doi:10.1007/s10035-006-0003-5
Peer reviewed

Peters, B., Dziugys, A., Hunsinger, H., & Krebs, L. (2005). An approach to qualify the intensity of mixing on a forward acting grate. Chemical Engineering Science, (60/6), 1649-1659. doi:10.1016/j.ces.2004.11.004
Peer Reviewed verified by ORBi

Peters, B. (2004). Cellular structures in solid fuel combustions. Flow, Turbulence and Combustion, 73(3-4), 217-229.
Peer Reviewed verified by ORBi

Peters, B., & Wurzenberger, J. (2004). Catalytic converters in a one-dimensional cycle simulation code considering three-dimensional behavior. SAE International Journal of Fuels and Lubricants.
Peer Reviewed verified by ORBi

Peters, B., Frey, H., Hunsinger, H., & Vehlow, J. (2004). Characterisation of muniipal solid waste combustion in a great furnace. Waste Management, 23(8), 689-701.
Peer reviewed

Peters, B., Bruch, C., & Schröder, E. (2004). Measurements and particle resolved modelling of the thermo-and fluid dynamics of a packed bed. Journal of Analytical and Applied Pyrolysis, (70), 211-233. doi:10.1016/S0165-2370(02)00133-X
Peer reviewed

Peters, B. (2003). Numerical Simulation of a Diesel Particulate Filter during Loading and Regeneration. ASME Internal Combustion Engine Division. doi:10.1115/ICES2003-0584
Peer reviewed

Peters, B. (2003). Thermal Conversion of Solid Fuels. WIT Press.

Peters, B., Bruch, C., & Nussbaumer, T. (2003). Modelling of wood combustion under fixed bed conditions. Fuel, 82 (6), 729-738. doi:10.1016/S0016-2361(02)00296-X
Peer Reviewed verified by ORBi

Peters, B. (2003). Characterization of Municipal Solid Waste Combustion in a Grate Furnace. Waste Management, vol. 23/8, 689-701. doi:10.1016/S0956-053X(02)00070-3
Peer reviewed

Peters, B., & Bruch, C. (2003). Drying and prolysis of wood particles: experiments and simulation. Journal of Analytical and Applied Pyrolysis, 70, 233-250. doi:10.1016/S0165-2370(02)00134-1
Peer reviewed

Peters, B. (2002). Measurements and Application of a Discrete Particle Model (DPM) to Simulate Combustion of a Packed Bed of Individual Fuel Particles. Combustion and Flame, 131, 132-146. doi:10.1016/S0010-2180(02)00393-0
Peer Reviewed verified by ORBi

Peters, B., Bruch, C., Schröder, E., & Nussbaumer, T. (2002). Measurements and particle resolved modelling of heat-up and drying of a packed bed. Biomass & Bioenergy, 23 (4), 291-306. doi:10.1016/S0961-9534(02)00052-1
Peer reviewed

Peters, B. (2002). Extinction of particles due to unstable combustion modes. Fuel, 81, 391-396. doi:10.1016/S0016-2361(01)00183-1
Peer Reviewed verified by ORBi

Peters, B., & Dzuigys, A. (2002). Numerical simulation of a motion of non-sherical granular material using object-orientated techniques. Computer Methods in Applied Mechanics and Engineering, 191, 1983-2007. doi:10.1016/S0045-7825(01)00364-4
Peer reviewed

Peters, B., Bruch, C., & Schröder, E. (2002). Measurements and particle resolved modelling of drying and pyrolysis of a packed bed. Journal of Analytical and Applied Pyrolysis. doi:10.1016/S0165-2370(02)00133-X
Peer reviewed

Peters, B., & Dziugys, A. (2001). An approach to simulate the motion of spherical and non-spherical fuel particles in combustions chambers. Granular Matter, 3, 231-265. doi:10.1007/pl00010918
Peer reviewed

Peters, B., & Dziugys, A. (2001). Bestimmung des Kontaktpunktes für die Bewegung von elliptischen granularen Medien. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik=Journal of Applied Mathematics & Mechanics, suppl.4 (0946-8463), 831-832.
Peer reviewed

Peters, B., & Dzuigys, A. (2001). Numerical modelling of electrified particle layer formation on the surface of filtration fabric. Environmental Engineering, 4, 191-197.
Peer reviewed

Peters, B., Müller, U., & Krebs, L. (2001). A principle approach to model furnace processes for waste incineration. Environ. Comb. Tech, 2, 383-402.
Peer reviewed

Peters, B., & Bruch, C. (2001). A flexible and stable numerical method for the decomposition process of wood particles. Chemosphere, 42, 481-490. doi:10.1016/S0045-6535(00)00220-4
Peer reviewed

Peters, B. (2000). Simulación Numérica de la Combustión en Lecho Estacionario. Ingenieria Quimica -Madrid-, 366, 147-150.
Peer reviewed

Peters, B. (1999). Classification of Combustion Regimes in a Packed Bed of Particles Based on the Relevant Time and Length Scales. Combustion and Flame, 116 (1-2), 297-301. doi:10.1016/S0010-2180(98)00048-0
Peer Reviewed verified by ORBi

Peters, B., & Dziugys, A. (1999). Numerical simulation of the motion and combustion of granular material. Industrial Heat Engineering, 21, 109-113.
Peer reviewed

Peters, B., Krebs, L., & Frey, H. (1998). Untersuchung der Mischung und Verweilzeit verschiedener Stoffstöme in einer Nachbrennkammer. Modellierung und Simulation von Dampferzeugern und Feuerungen. VDI-Berichte, 1390.
Peer reviewed

Peters, B., & Krebs, L. (1998). Experimente und Modellierung zur heterogenen und homogenen Verbrennung. FZKA-Bericht, 6084.

Peters, B., Müller, U., & Krebs, L. (1997). Zur Modellierung der thermo-und fluiddynamischen Vorgänge bei der Festbettverbrennung. In Kaleidoskop aus aktueller forschung und Entwicklung. Verlag Ernst Grässer.
Peer reviewed

Peters, B. (1997). Application de la Conception Objet Orienté à la Modélisation de l'Incinération de Déchets Municipaux. Proceedings of Informatique pour l’Environnement ’97.
Peer reviewed

Introini, C., Baroli, D., Lorenzi, S., Cammi, A., Bordas, S., & Peters, B. (n.d.). A mass conservative Kalman filter algorithm for thermo-computational fluid dynamics. Materials.
Peer reviewed

Mashhood, M., Peters, B., Wyart, E., & Baroli, D. (n.d.). Modelling challenges & simulation results comparison study for inactive elements activation approach in numerical simulation of Selective Laser Melting Additive Manufacturing process. ORBilu-University of Luxembourg. https://orbilu.uni.lu/handle/10993/53919.

Contact ORBilu