Back
  1. Home
  2. Profile of Slawomir KEDZIORA (Unilu)
Profil

KEDZIORA Slawomir

University of Luxembourg > Faculty of Science, Technology and Medicine (FSTM) > Department of Engineering (DoE)

ORCID
0000-0003-0856-7346
Main Referenced Co-authors
MAAS, Stefan  (18)
Gerich, Torsten (10)
Kelm, Jens (10)
SOLIMAN, Ahmed Abdelsalam Mohamed  (10)
REPPLINGER, Christian  (7)
Main Referenced Keywords
FEA (10); additive manufacturing (5); Becken (3); Biomechanische (3); Design (3);
Main Referenced Unit & Research Centers
RUES (4)
Department of Strength of Materials, Lodz University of Technology (1)
REUS (1)
Research Unit in Engineering Sciences (RUES) (1)
Main Referenced Disciplines
Mechanical engineering (42)
Materials science & engineering (2)
Civil engineering (1)
Engineering, computing & technology: Multidisciplinary, general & others (1)

Publications (total 46)

The most downloaded
1531 downloads
Martin, L., & KEDZIORA, S. (2016). Design of Automotive Road Racing Rim with Aid of Topology Optimization. (00114092016). Luxembourg, Luxembourg: Faculty of Science, Technology and Communication University of Luxembourg. https://orbilu.uni.lu/handle/10993/28655 https://hdl.handle.net/10993/28655

The most cited

29 citations (Scopus®)

KEDZIORA, S., DECKER, T., MUSEYIBOV, E., Morbach, J., Hohmann, S., Huwer, A., & Wahl, M. (2022). Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing. Materials, 15 (18), 6278. doi:10.3390/ma15186278 https://hdl.handle.net/10993/54163

REPPLINGER, C., Sellen, S., KEDZIORA, S., Zürbes, A., & MAAS, S. (28 August 2024). Material modeling for numerical simulation of elastomer O-rings with experimental verification at low temperatures. International Journal of Hydrogen Energy, 80, 1046 - 1061. doi:10.1016/j.ijhydene.2024.06.427
Peer Reviewed verified by ORBi

SOLIMAN, A. A. M., KEDZIORA, S., Kelm, J., MAAS, S., & Gerich, T. (July 2024). Experimental and numerical assessment of two reconstructive techniques for the fragility fractures of the pelvis type Ia. Medical Engineering and Physics, 119. doi:10.1016/j.medengphy.2023.104026
Peer Reviewed verified by ORBi

DECKER, T., & KEDZIORA, S. (27 March 2024). Optimizing the Thickness of Functionally Graded Lattice Structures for High-Performance Energy Absorption: A Case Study Based on a Bicycle Helmet. Applied Sciences, 14 (7), 2788. doi:10.3390/app14072788
Peer Reviewed verified by ORBi

MAAS, S., KEDZIORA, S., Gerich Torsten, Kelm Jens, & BLUMER SANCHEZ, A. (15 March 2024). Design of realistic loading for experimental testing of petrochanteric fractures using facorial analysis [Paper presentation]. Osteologie 2024. doi:10.1055/s-0044-1782058
Editorial reviewed

NOROUZIAN, M., Amne Elahi, Koch, M., Zaeem, R. M., & KEDZIORA, S. (2024). Data-driven analysis of surface roughness influence on weld quality and defect formation in laser welding of Cu–Al. Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Applications. doi:10.1177/14644207241236138
Peer Reviewed verified by ORBi

DECKER, T., KEDZIORA, S., & MUSEYIBOV, E. (12 December 2023). Comparison of Strength Properties of Common Powder Bed Fusion and Stereolithography Materials. Key Engineering Materials, 969, 11-20. doi:10.4028/p-Sgu1sR
Peer Reviewed verified by ORBi

DECKER, T., & KEDZIORA, S. (04 December 2023). Local Thickness Optimization of Functionally Graded Lattice Structures in Compression. Applied Sciences, 13 (23), 12969. doi:10.3390/app132312969
Peer Reviewed verified by ORBi

KEDZIORA, S., DECKER, T., & MUSEYIBOV, E. (June 2023). Application of Functionally Graded Shell Lattice as Infill in Additive Manufacturing. Materials, 16 (12), 4401. doi:10.3390/ma16124401
Peer Reviewed verified by ORBi

SOLIMAN, A. A. M., Ricci, P.-L., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (2023). Developing A Biomechanical Testing Setup Of The Pelvis, Part II - Experimental Testing. Journal of Biomechanical Engineering. doi:10.1115/1.4062578
Peer Reviewed verified by ORBi

SOLIMAN, A. A. M., Ricci, P.-L., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (2023). Developing a Biomechanical Testing Setup of the Pelvis, Part I - Computational Design of Experiments. Journal of Biomechanical Engineering. doi:10.1115/1.4062538
Peer Reviewed verified by ORBi

SOLIMAN, A. A. M., Ricci, P.-L., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (28 October 2022). AUSLEGUNG eines BIOMECHANISCHEN TESTSTANDES für das BECKEN einschließlich der MUSKELKRÄFTE des GANGZYKLUS [Paper presentation]. Der Deutsche Kongress für Orthopädie und Unfallchirurgie (DKOU), Berlin, Germany. doi:10.3205/22dkou600

SOLIMAN, A. A. M., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (28 October 2022). Experimentelle Bewertung der Spannungen und der zugehörigen Implantate bei anterioren Beckenfrakturen vom Typ I [Paper presentation]. Der Deutsche Kongress für Orthopädie und Unfallchirurgie (DKOU). doi:10.3205/22dkou602

Gerich, T., SOLIMAN, A. A. M., Ricci, P.-L., KEDZIORA, S., Kelm, J., & MAAS, S. (26 October 2022). Biomechanische Untersuchung zu verschiedenen Verfahren der Stabilisierung von Insuffizienzfrakturen des vorderen Beckenringes [Poster presentation]. Der Deutsche Kongress für Orthopädie und Unfallchirurgie (DKOU), Berlin, Germany. doi:10.3205/22dkou250

SOLIMAN, A. A. M., Ricci, P.-L., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (27 June 2022). DESIGN OF BIOMECHANICAL TESTING DEVICE FOR THE PELVIS INCLUDING GAIT MUSCLE FORCES [Paper presentation]. 27th Congress of the European Society of Biomechanics, Porto, Portugal.

KEDZIORA, S., DECKER, T., MUSEYIBOV, E., Morbach, J., Hohmann, S., Huwer, A., & Wahl, M. (2022). Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing. Materials, 15 (18), 6278. doi:10.3390/ma15186278
Peer Reviewed verified by ORBi

Szatkowski, P., Szatkowska, M., Gralewski, J., Czechowski, L., & KEDZIORA, S. (2022). Biocomposites with Epoxy Resin Matrix Modified with Ingredients of Natural Origin. Materials, 15. doi:10.3390/ma15207167
Peer Reviewed verified by ORBi

Czechowski, L., KEDZIORA, S., MUSEYIBOV, E., SCHLIENZ, M., Szatkowski, P., Szatkowska, M., & Gralewski, J. (2022). Influence of UV Ageing on Properties of Printed PLA Containing Graphene Nanopowder. Materials, 15 (22), 8135. doi:10.3390/ma15228135
Peer Reviewed verified by ORBi

HICHRI, B., Gallala, A., Giovannini, F., & KEDZIORA, S. (2022). Mobile robots path planning and mobile multirobots control: A review. Robotica, 40 (12), 4257-4270. doi:10.1017/s0263574722000893
Peer reviewed

REPPLINGER, C., SELLEN, S., KEDZIORA, S., Zürbes, A., & MAAS, S. (2021). Analysis of residual stress relaxation of aluminum alloys EN AW 6061/-82 T6 under cyclic loading. Fatigue and Fracture of Engineering Materials and Structures. doi:10.1111/ffe.13542
Peer Reviewed verified by ORBi

SOLIMAN, A. A. M., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (September 2021). INVESTIGATING THE INFLUENCE OF PERSONALIZED MUSCULOSKELETAL MODELS ON THE CALCULATED STRESSES IN THE PELVIC RING [Poster presentation]. 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and. the 5th Conference on Imaging and Visualization, Bonn, Germany.

SOLIMAN, A. A. M., KEDZIORA, S., Kelm, J., Gerich, T., & MAAS, S. (July 2021). Investigating the influence of personalized musculoskeletal models on the calculated muscles and joints forces [Poster presentation]. XXVIII CONGRESS OF THE INTERNATIONAL SOCIETY OF BIOMECHANICS (ISB), Stockholm, Sweden.

DECKER, T., KEDZIORA, S., & WOLF, C. (2020). Practical Implementation of Functionally Graded Lattice Structures in a Bicycle Crank Arm. 850th International Conference on Science, Technology, Engineering and Management.
Peer reviewed

Ricci, P.-L., Gerich, T., Kelm, J., KEDZIORA, S., SOLIMAN, A. A. M., & MAAS, S. (October 2020). Numerical Assessment of two Implants for Pubic Ramus Fracture of human Pelvis applying Normal Gait loading [Poster presentation]. 21st EFORT Congress of The European Federation of National Associations of Orthopaedics and Traumatology, Vienna, Austria.

CAO, T. B., KEDZIORA, S., SELLEN, S., & REPPLINGER, C. (2020). Optimization assisted redesigning a structure of a hydrogen valve: the redesign process and numerical evaluations. International Journal on Interactive Design and Manufacturing. doi:10.1007/s12008-020-00648-x
Peer reviewed

KEDZIORA, S., & Cao, T. B. (13 January 2020). Optimum Autofrettage Pressure of Hydrogen Valve Using Finite Element and Fatigue Analysis. Engineering, 12 (01), 1--24. doi:10.4236/eng.2020.121001
Peer reviewed

REPPLINGER, C., Sellen, S., KEDZIORA, S., Zürbes, A., Cao, T. B., & MAAS, S. (2020). Numerical determination and experimental verification of the optimum autofrettage pressure for a complex aluminium high-pressure valve to foster crack closure. Fatigue and Fracture of Engineering Materials and Structures. doi:10.1111/ffe.13227
Peer Reviewed verified by ORBi

CAO, T. B., KEDZIORA, S., Sellen, S., MAAS, S., & REPPLINGER, C. (2020). Designing an early failure indicator channel for an in-tank hydrogen valve via a fatigue-based approach. Journal of Computational Design and Engineering. doi:10.1093/jcde/qwaa007
Peer Reviewed verified by ORBi

Czechowski, L., KEDZIORA, S., & Kolakowsk, Z. (19 December 2019). The Buckling and Post-Buckling of Steel C-Columns in Elevated Temperature. Materials, 13 (74), 1-12. doi:10.3390/ma13010074
Peer Reviewed verified by ORBi

Kolb, J., & KEDZIORA, S. (2019). Design of continuously variable bicycle transmission. Luxembourg, Luxembourg: University Luxembourg. https://orbilu.uni.lu/handle/10993/40171

CAO, T. B., & KEDZIORA, S. (2019). Innovative designs of an in-tank hydrogen valve towards direct metal laser sintering compatibility and fatigue life enhancement. Structural and Multidisciplinary Optimization. doi:10.1007/s00158-018-2174-1
Peer Reviewed verified by ORBi

REPPLINGER, C., Sellen, S., KEDZIORA, S., Zürbes, A., & MAAS, S. (2019). Materials, valves and sealing gaskets for high pressure applications [Poster presentation]. H2 Conference "Hydrogen: Hype or real business opportunities?".

WOLF, C., & KEDZIORA, S. (18 December 2018). Upcycling polymers: a revolutionary approach to promoting the circular economy. Impact, 2018 (Number 9), 103-105(3. doi:10.21820/23987073.2018.9.103

KEDZIORA, S., & Anwaar, M. O. (2018). Concrete-Filled Steel Tubular (CFTS) Columns Subjected to Eccentric Compressive Load. AIP Conference Proceedings. doi:10.1063/1.5086135

REPPLINGER, C., Sellen, S., KEDZIORA, S., Zürbes, A., CAO, T. B., & MAAS, S. (2018). Determination of the optimum autofrettage pressure for a complex aluminum valve body [Paper presentation]. 2nd International Conference on Structural Integrity and Durability.

DIFFO KAZE, A., MAAS, S., KEDZIORA, S., Belsey, J., Haupert, WOLF, C., Hoffmann, A., & Pape, D. (06 November 2017). Numerical comparative study of five currently used implants for high tibial osteotomy: realistic loading including muscle forces versus simplified experimental loading. Journal of Experimental Orthopaedics, 5 (28). doi:10.1186/s40634-018-0144-6
Peer Reviewed verified by ORBi

CAO, T. B., & KEDZIORA, S. (April 2017). NEW METHODOLOGY FOR DESIGNING DIRECT-LASER-SINTERED MOTORCYCLE FRAME BASED ON COMBINATION OF TOPOLOGY OPTIMIZATION AND LATTICE IMPLEMENTATION. International Journal of Mechanical Engineering, 6 (3), 39-50.
Peer reviewed

CAO, T. B., & KEDZIORA, S. (07 February 2017). New methodology for designing direct-laser-sintered motorcycle frame based on combination of topology optimization and lattice implementation [Paper presentation]. 2017 Seoul International Conference on Engineering and Applied Science (SICEAS), Seoul, South Korea.

WOLF, C., & KEDZIORA, S. (February 2017). UpAM: UPCYCLING VIA ADDITIVE MANUFACTURING – HOW 3D PRINTING CAN ENHANCE CIRCULAR ECONOMY. Revue Technique Luxembourgeoise, 2017 (2), 38.

KEDZIORA, S. (2017). Optimal design of cap screw thread runout for transversal and axial loads. Journal of Applied Mechanical Engineering, 6 (1). doi:10.4172/2168-9873.1000250
Peer reviewed

Martin, L., & KEDZIORA, S. (2016). Design of Automotive Road Racing Rim with Aid of Topology Optimization. (00114092016). Luxembourg, Luxembourg: Faculty of Science, Technology and Communication University of Luxembourg. https://orbilu.uni.lu/handle/10993/28655

KEDZIORA, S. (2016). Air centre structure of automotive heat exchangers in view of its post-buckling behaviour. In R. Mania (Ed.), STATICS, DYNAMICS AND STABILITY OF STRUCTURES (1, pp. 54-74). Lodz, Poland: Lodz University of Technology.
Peer reviewed

KEDZIORA, S. (2016). Application of structural topology optimisation for planetary carrier design. In Z. Kolakowski (Ed.), SELECTED PROBLEMS OF CONTINUUM MECHANICS (1, pp. 54-71). Lodz, Poland: 2016.
Peer reviewed

KEDZIORA, S. (2015). Air centre structure of automotive heat exchangers in view of its post-buckling behaviour [Paper presentation]. Stability of Structures XIV-th Symposium, Zakopane, Poland.

KEDZIORA, S., & Michalski, P. (April 2013). Zastosowanie ANSYS i ANSYS Workbench w procesie projektowania obudów skrzyń biegów [Paper presentation]. SYMULACJA 2013, Spała, Poland.

Jamil, B. H., KEDZIORA, S., Frank, L., Brian, C., & Robert, G. (04 January 2011). Heat exchanger mounting bracket.

Puillandre, Y., KEDZIORA, S., Mailliet-Bestel, D., & Cowell, T. (2007). Development Process for a Charge Air Cooler to Meet Modern Requirements. In P. White (Ed.), Vehicle thermal management systems : VTMS 8 (1). Oxford :, United Kingdom: Chandos, 2007.

Contact ORBilu