Browsing
     by title


0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

or enter first few letters:   
OK
Full Text
Peer Reviewed
See detailExperimental validation of a newly designed 6 degrees of freedom scanning laser head: Application to three-dimensional beam structure
Copertaro, Edoardo UL; Di Maio, Dario

in Review of Scientific Instruments (2013), 84

A new scanning laser head is designed to use single Laser Doppler Vibrometer (LDV) for performing measurements up to 6 degrees of freedom (DOF) at a target. The scanning head is supported by a rotating ... [more ▼]

A new scanning laser head is designed to use single Laser Doppler Vibrometer (LDV) for performing measurements up to 6 degrees of freedom (DOF) at a target. The scanning head is supported by a rotating hollow shaft, which allows the laser beam to travel up to the scanning head from an opposite direction where an LDV is set up. The scanning head is made of a set of two mirrors, which deflects the laser beam with an angle so that the rotation of the scanning head produces a conical scan. When measurements are performed at the focal point of the conical scan then three translational vibration components can be measured, otherwise the very small circle scan, before and after the focal point, can measure up to 6 degrees of freedom, including three translations and three rotations. This paper presents the 6DOF scanning head and the measurements of 3D operational deflection shapes of a test structure. [less ▲]

Detailed reference viewed: 85 (3 UL)
Full Text
Peer Reviewed
See detailExperimental validation of adaptive control for a Shape Memory Alloy actuated lightweight robotic arm
Quintanar Guzman, Serket UL; Kannan, Somasundar UL; Voos, Holger UL et al

in ASME 2018 Conferences on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio 10-12 September 2018 (2018, September)

This article presents the experimental validation of a Direct Adaptive Control for angular position regulation of a lightweight robotic arm. The robotic arm is single degree-of-freedom (DOF) system ... [more ▼]

This article presents the experimental validation of a Direct Adaptive Control for angular position regulation of a lightweight robotic arm. The robotic arm is single degree-of-freedom (DOF) system, actuated by two Shape Memory Alloy (SMA) wires. The proposed adaptive control is capable of adapting itself to the hysteretic behavior of SMA wires and update its behavior to deal with the changing parameters of the material over time. The closed-loop approach is tested experimentally showing its effectiveness to deal with the highly nonlinear dynamics of the SMA wires. These results are discussed and compared with a classical control approach. The updated design and hardware development and modeling of the robotic arm are shown. [less ▲]

Detailed reference viewed: 132 (8 UL)
Full Text
Peer Reviewed
See detailAn experimental/numerical investigation into the main driving force for crack propagation in uni-directional fibre-reinforced composite laminae
Cahill, L. M. A.; Natarajan, S.; Bordas, Stéphane UL et al

in Composite Structures (2014), 107

This paper presents an enriched finite element method to simulate the growth of cracks in linear elastic, aerospace composite materials. The model and its discretisation are also validated through a ... [more ▼]

This paper presents an enriched finite element method to simulate the growth of cracks in linear elastic, aerospace composite materials. The model and its discretisation are also validated through a complete experimental test series. Stress intensity factors are calculated by means of an interaction integral. To enable this, we propose application of (1) a modified approach to the standard interaction integral for heterogeneous orthotropic materials where material interfaces are present; (2) a modified maximum hoop stress criterion is proposed for obtaining the crack propagation direction at each step, and we show that the “standard” maximum hoop stress criterion which had been frequently used to date in literature, is unable to reproduce experimental results. The influence of crack description, material orientation along with the presence of holes and multi-material structures are investigated. It is found, for aerospace composite materials with View the MathML source ratios of approximately 10, that the material orientation is the driving factor in crack propagation. This is found even for specimens with a material orientation of 90°, which were previously found to cause difficulty in both damage mechanics and discrete crack models e.g. by the extended finite element method (XFEM). The results also show the crack will predominantly propagate along the fibre direction, regardless of the specimen geometry, loading conditions or presence of voids. [less ▲]

Detailed reference viewed: 960 (10 UL)
Full Text
Peer Reviewed
See detailExperimentation of Proactive Computing in Context Aware Systems: Case Study of Human-Computer Interactions in e-Learning Environment
Shirnin, Denis UL; Reis, Sandro UL; Zampunieris, Denis UL

in Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), 2013 IEEE International Multi-Disciplinary Conference on (2013)

In this paper we show the implementation of the concept of Proactivity applied as the core mechanism in our Proactive Context Aware System (PCAS), which is capable to detect and extract the related events ... [more ▼]

In this paper we show the implementation of the concept of Proactivity applied as the core mechanism in our Proactive Context Aware System (PCAS), which is capable to detect and extract the related events of interest from the user's contextual situation and to provide the appropriate goal-oriented actions to this event with the objective to help or assist the user or the group of users. We have chosen the academic environment as the ongoing contextual setting for our system. From this perspective, we designed Proactive Scenarios for an automatic and enhanced management of the online learning and teaching activities on Moodle™ for both student and teacher users. Due to the diversity of the potential contexts and situations arising from the user's activity, we developed two kinds of Proactive Scenarios. The first type or Meta Scenarios are responsible for capturing the changes in the outward context. The second type or Target Scenarios are triggered off by Meta Scenarios and aim to undertake the appropriate actions in response to the conditions of the user's contextual situation. In order to test and validate the capability of our software as well as to analyse its context related outcomes we have performed empirical studies. The experiments consisted in creating two groups of students, on the one hand the study group, which used the Moodle™ platform enhanced by PCAS, and on the other hand the control group, which used the standard version of Moodle™. The subsequent data analysis showed significant differences in specific related results such as notable advantage of the study group outcomes in the category of passing the final exam, where the study group has performed by 11 percentage points better than the control group. [less ▲]

Detailed reference viewed: 161 (18 UL)
See detailExperimente und Modellierung zur heterogenen und homogenen Verbrennung.
Peters, Bernhard UL; Krebs, L.

in FZKA-Bericht (1998), 6084

Detailed reference viewed: 69 (1 UL)
See detailExperimente unerwünscht!?! Sonntagsfilme der Konsumgesellschaft im lokalen Wettbewerb mit ambitioniertem Autorenfilm 
Wack, Julia UL

Presentation (2019, May)

Aufgrund einer großen Anzahl unterschiedlicher Definitionen des Avantgarde-Begriffes in verschiedenen Feldern durch die Jahrzehnte ist es von Vorteil sich zunächst auf einige grundlegende Parameter zu ... [more ▼]

Aufgrund einer großen Anzahl unterschiedlicher Definitionen des Avantgarde-Begriffes in verschiedenen Feldern durch die Jahrzehnte ist es von Vorteil sich zunächst auf einige grundlegende Parameter zu einigen, die den Begriff ein- und abgrenzen, bevor er Eingang in die Debatte findet. Mit dem Mainstream verhält es sich etwas einfacher, denn obschon seine Begrifflichkeit sehr weitläufig ist, ist er in sich homogener und Teil des Alltagsdiskurses geworden. Sind eine Vorreiterrolle, oder auch ein Bestreben nach sozialer Neuerung und politischem Umschwung, Abkehr von Traditionen, Elemente die man in der Praxis der Amateurfilmclubs der Großregion in den 60er Jahren findet? Das Amateurfilmen erfreute sich in Folge neuester Entwicklungen in der Schmalfilmtechnologie in den langen 60er Jahren großer Beleibtheit, in- und außerhalb des Vereinskontexts Es war unter anderem dieser technische Fortschritt, der, neben neuerlich erschwinglichem Material, vereinfachter Handhabung und verbesserter Qualität, einlud, inhaltliche, technische und künstlerische Experimente zu unternehmen. Während der Großteil der Clubmitglieder sich auf ähnliche Motive wie seine Kollegen außerhalb der Vereine beschränkte, bspw. Familienfeiern, -ausflüge oder Reisen, fühlten sich einige Mitglieder zur Filmautorenschaft berufen und kreierten als Drehbuchautor, Regisseur und Kameramann in Personalunion anspruchsvollere Filmwerke; hauptsächlich zur Vorführung in vereinsinternen, regionalen, nationalen und internationalen Wettbewerben. Doch auch innerhalb dieses aufwendiger produzierten Werkkorpus’, der v.a. der Übersetzung der zeitgenössischen Alltagskultur auf Zelluloid Raum gab, wurde nur eine geringe Anzahl von Filmen, die avantgardistische Merkmale aufweist, produziert. Die wenigsten waren visuell, inhaltlich oder technisch radikal oder innovativ jenseits bekannter Lesweisen. Im Gegenteil gab es Ausnahmefälle kommerzieller Auftragsarbeiten, oder Amateurproduktionen, die im Nachhinein vom Fernsehen aufgekauft wurden. Die Filmarbeiten verschiedener Genres waren oft nur innerhalb der Vereinsarbeit möglich, da ambitionierte Produktionen nach Arbeitsteilung und Kooperation ähnlich dem professionellen Sektor verlangten. Zum einen tauschten die Amateure sich über Schnitt-, Licht- oder Montagetechniken aus, zum anderen wurden Aufgaben wie Beleuchtung und Ton oder Kulissenbau aufgeteilt, viele Filme so zu Gemeinschafts-produktionen. Neben dieser mehr industrialisierte, organisierte Form des Amateurfilms, die oft auf die Rezeption des Publikums und die Bewertung durch eine Jury Gleichgesinnter abzielte, und so die dem Amateur eigene Autonomie vom Filmbetrieb aufgab; gab es wenige Versuche, Filme, die nicht dem üblichen Narrativkonstrukt der ‘Standard-Version’ des kommerziellen Produktionswesens entsprachen, zu drehen. In Hochzentren kultureller Produktion wie New York, London, Paris oder Los Angeles kam es zu gelegentlichem Austausch zwischen Amateur- und kommerzieller sowie nicht-kommerzieller Filmproduktion, welche sich jeweils beeinflußten. Da die Großregion dieser Jahre bezüglich kultureller Produktion und Amateurpartizipation getrost als Peripherie bezeichnet werden kann, mag einer der Gründe für die geringe Repräsentation innovativer oder experimenteller Filmarbeiten die geringe Abdeckung durch Kunst-und Filmakademien sein, die einen Austausch, wie er der Avantgarde eigen ist, hätten anregen können. Doch auch international und in größeren Städten existierte kaum eine lebendige Avantgarde-Szene innerhalb von Amateurfilmklubnetzwerken. Weitere Gründe, die sich überregional anwenden lassen, könnten daher die Institutionalisierung (gegen die die Avantgarde generell anging) durch die Club- und Verbandsstruktur und das Wettbewerbsverhalten, das mit ‘Mainstreaming’ einher geht; sowie die Demografie der Clubs sein. Letztere war in der Großregion - wie international - stark homogen (was wiederum in Kontrast mit der Avantgarde steht) und von technisch interessierten, arbeitenden Männern mittleren und fortgeschrittenen Alters - d.h. kulturell während und kurz nach dem Zweiten Weltkrieg sozialisiert - bestimmt. Neben den eigentlichen Filmquellen ist auch das Vereinsleben Teil der Recherchen: Unterscheidet sich das Sozialleben der Mitglieder eines Filmclubs von dem eines Sportvereins und findet die populärkulturelle Sozialisation der Mitglieder und ihrer Angehörigen Eingang in Vereinsleben und Filmproduktionen? [less ▲]

Detailed reference viewed: 34 (0 UL)
See detailExperimentelle Medienarchäologie: das Beispiel Kunstkopf-Stereophonie
Krebs, Stefan UL

Scientific Conference (2017)

Detailed reference viewed: 49 (2 UL)
Full Text
See detailExperimentelle Überprüfung eines antagonistisches Erklärungsmodells zum selbstgesteuerten Bewegungslernen
Bund, Andreas UL; Ferwagner, Dirk

Scientific Conference (2005, May)

Detailed reference viewed: 36 (0 UL)
Full Text
See detailExperimentelle Untersuchungen und analytischen Modellierung von adiabaten Siedevorgängen in Naturumlaufsystemen
Haag, Michel UL

Doctoral thesis (2020)

Modern nuclear reactors increasingly use passive safety systems to ensure the integrity of the containment in the event of an accident. Natural circulation systems allow passive heat removal from the ... [more ▼]

Modern nuclear reactors increasingly use passive safety systems to ensure the integrity of the containment in the event of an accident. Natural circulation systems allow passive heat removal from the containment to the environment. One of their disadvantages is that instabilities develop as soon as evaporation occurs in the system. This thesis investigates instabilities in two-phase natural circulation systems. After comprehensive literature review on existing test facilities, the first part of this work presents experimental investigations on the stability behaviour of natural circulation systems. To conduct these investigations, the INTRAVIT test facility was designed and constructed at the University of Luxembourg. INTRAVIT offers both a high degree of flexibility in the design of the pipelines and the advantage of a direct, electrically controllable heat supply. Two measurement campaigns were carried out. During the first campaign, the influence of the heating tube inclination angle on the instabilities was investigated at constant riser pipe length. During the second measurement campaign, the influence of the riser pipe length and the influence of the flow resistance in the downcomer pipe were investigated at a constant inclination angle of the heating tube. For these investigations, temperatures, mass flow and the distribution of void in the riser pipe were analysed. In addition, pressure response during the instabilities was measured to investigate the pressure shocks caused by water hammering. The second part of this work develops an analytical model to decribe evaporation processes in adiabatic pipes. The model consists of several sub models that calculate the interfacial surface density and the evaporation rate as a function of the flow pattern. An integrated nucleation model calculates the onset of the evaporation. The derived model was implemented in the system code ATHLET. Experiments from the INTRAVIT measurement campaigns were then modelled using the new evaporation model as well as the standard evaporation model. Both were compared with the measurement data. The design and construction of the INTRAVIT test facility is a foundation for future research on instabilities in natural circulation systems. Moreover, a new evaporation model is presented, which can easily be adapted and refined by modifying individual sub models. [less ▲]

Detailed reference viewed: 79 (14 UL)
Full Text
Peer Reviewed
See detailExperimenter Effects in Children Using the Smileyometer Scale
Lehnert, Florence Kristin UL; Lallemand, Carine UL; Fischbach, Antoine UL et al

Scientific Conference (2020, November 19)

Researchers in the social sciences like human-computer interaction face novel challenges concerning the development of methods and tools for evaluating interactive technology with children. One of these ... [more ▼]

Researchers in the social sciences like human-computer interaction face novel challenges concerning the development of methods and tools for evaluating interactive technology with children. One of these challenges is related to the validity and reliability of user experience measurement tools. Scale designs, like the Smileyometer, have been proven to contain biases such as the tendency for children to rate almost every technology as great. This explorative paper discusses a possible effect of two experimenter styles on the distribution of 6-8 years old pupils' ratings (N= 73) to the Smileyometer. We administered the scale before and after a tablet-based assessment in two schools. Experimenter 1 employed a child-directed speech compared to a monotone speech of Experimenter 2. While brilliant (5 out of 5) was the most frequent answer option in all conditions, the mean scores were higher and associated with a lower variability across both conditions for Experimenter 2. We discuss a possible experimenter effect in the Smileyometer and implications for evaluating children’s user experiences. [less ▲]

Detailed reference viewed: 95 (4 UL)
See detailExpérimenter la Franc-maçonnerie : Un témoignage
Meyers, Christian UL

Conference given outside the academic context (2012)

Detailed reference viewed: 28 (0 UL)
See detailExpérimenter les Humanités numériques
Clavert, Frédéric UL; Cavalié, Etienne; Legendre, Olivier et al

Book published by Presses Universitaires de Montréal (2017)

Univers en perpétuelle expansion et au foisonnement chaotique, Internet offre un nombre incalculable d’outils, dont l’exploration paraît parfois hors de portée. Dans le paysage des sciences humaines, les ... [more ▼]

Univers en perpétuelle expansion et au foisonnement chaotique, Internet offre un nombre incalculable d’outils, dont l’exploration paraît parfois hors de portée. Dans le paysage des sciences humaines, les blogs, les logiciels bibliographiques, les bases de données, les éditions en ligne et les wikis, tous ces objets qui éveillaient notre curiosité il y a une décennie, sont devenus aussi anodins qu’omniprésents. Mais comment bien s’en servir ? Les appréhensions face à ces outils — et leur simple mais robuste méconnaissance — sont encore largement répandues. Or on ne peut plus ignorer leur intérêt, voire leur nécessité et les chercheurs qui s’y essaient ne savent souvent pas par quel bout attraper ces logiciels nouveaux. C’est à cela que cet ouvrage veut les aider, de façon simple et précise, et il entend le faire sans en cacher les difficultés, mais sans dissimuler non plus qu’elles sont désormais connues, donc surmontables, et que, dans la majorité des cas, le résultat vaut tous les efforts à consentir. [less ▲]

Detailed reference viewed: 244 (13 UL)
Full Text
Peer Reviewed
See detailExperimenting for Sustainable Transport. The approach of Strategic Niche Management
Hesse, Markus UL

in Journal of Transport Geography (2005), 13(1), 101-105

Detailed reference viewed: 119 (0 UL)
Full Text
Peer Reviewed
See detailExperiments in Computational Metaphysics: Gödel's Proof of God's Existence
Benzmüller, Christoph UL; Woltzenlogel Paleo, Bruno

in Savijnanam: scientific exploration for a spiritual paradigm. Journal of the Bhaktivedanta Institute (2017), 9

“Computer scientists prove the existence of God” --- variants of this headline appeared in the international press in autumn 2013. Unfortunately, many media reports had only moderate success in ... [more ▼]

“Computer scientists prove the existence of God” --- variants of this headline appeared in the international press in autumn 2013. Unfortunately, many media reports had only moderate success in communicating to the wider public what had actually been achieved and what not. This article outlines the main findings of the authors’ joint work in computational metaphysics. More precisely, the article focuses on their computer-supported analysis of variants and recent emendations of Kurt Gödel’s modern ontological argument for the existence of God. In the conducted experiments, automated theorem provers discovered some interesting and relevant facts. [less ▲]

Detailed reference viewed: 254 (1 UL)
Full Text
Peer Reviewed
See detailExperiments with Reservoir Computing on the road sign problem
Antonelo, Eric Aislan UL; Schrauwen, Benjamin; Stroobandt, Dirk

in Proceedings of the VIII Brazilian Congress on Neural Networks (CBRN) (2007)

The road sign problem is tackled in this work with Reservoir Computing (RC) networks. These networks are made of a fixed recurrent neural network where only a readout layer is trained. In the road sign ... [more ▼]

The road sign problem is tackled in this work with Reservoir Computing (RC) networks. These networks are made of a fixed recurrent neural network where only a readout layer is trained. In the road sign problem, an agent has to decide at some point in time which action to take given relevant information gathered in the past. We show that RC can handle simple and complex T-maze tasks (which are a subdomain of the road sign problem). [less ▲]

Detailed reference viewed: 65 (0 UL)
Full Text
Peer Reviewed
See detailExperiments with the interior-point method for solving large scale optimal power flow problems
Capitanescu, Florin UL; Wehenkel, Louis

in Electric Power Systems Research (2013), 95(2), 276-283

This paper reports extensive results obtained with the Interior-Point Method (IPM) for nonlinear programms (NLPs) stemming from large-scale and severly constrained classical Optimal Power Flow (OPF) and ... [more ▼]

This paper reports extensive results obtained with the Interior-Point Method (IPM) for nonlinear programms (NLPs) stemming from large-scale and severly constrained classical Optimal Power Flow (OPF) and Security-Constrained Optimal Power Flow (SCOPF) problems. The paper discusses transparently the problems encountered such as convergence reliability and speed issues of the method. [less ▲]

Detailed reference viewed: 212 (16 UL)
See detailexpert meeting Digital Source Criticism
Scagliola, Stefania UL

Presentation (2017, December 18)

this expert meeting was meant to bring scholars together who conduct research on the topic of digital hermeneutics and digital source criticism, to exchange their views on the interpretation of this ... [more ▼]

this expert meeting was meant to bring scholars together who conduct research on the topic of digital hermeneutics and digital source criticism, to exchange their views on the interpretation of this concept. [less ▲]

Detailed reference viewed: 54 (2 UL)