Browse ORBi

- What it is and what it isn't
- Green Road / Gold Road?
- Ready to Publish. Now What?
- How can I support the OA movement?
- Where can I learn more?

ORBi

Correction to: Performance assessment of the relative gravimeter Scintrex CG-6 Francis, Olivier in Journal of Geodesy (2022), 96(1), 1-1 Detailed reference viewed: 63 (2 UL)Performance assessment of the relative gravimeter Scintrex CG-6 Francis, Olivier in Journal of Geodesy (2021), 95:116 The new-generation relative gravimeter Scintrex CG6 is put on the test bench: Its performance is compared to its predecessor, the Scintrex-CG5. A CG5 Scintrex and a CG6 Scintrex were both submitted to the ... [more ▼] The new-generation relative gravimeter Scintrex CG6 is put on the test bench: Its performance is compared to its predecessor, the Scintrex-CG5. A CG5 Scintrex and a CG6 Scintrex were both submitted to the same rigorous tests, which have been developed in recent years to highlight some defects of the CG5. The results show that the CG6 always performs better than the CG5. For instance, the instrumental drift is 5 times smaller for the CG6 than for the CG5. In the tidal bands, the noise level of the CG6 is 3 times lower than of the one of the CG5. We confirmed the tilt susceptibility of the CG5 and found that the CG6 is barely affected by long duration tilts before taking measurements. Unlike the CG5, the CG6 measurements are not influenced by external temperature variations. Overall, the CG6 provides more precise and stable gravity measurements compared to the CG5. [less ▲] Detailed reference viewed: 73 (4 UL)Seasonal low-degree changes in terrestrial water mass load from global GNSS measurements Meyrath, Thierry ; van Dam, Tonie ; et al in Journal of Geodesy (2017), 91(11), 1329-1350 Large-scale mass redistribution in the terrestrial water storage (TWS) leads to changes in the low-degree spherical harmonic coefficients of the Earth's surface mass density field. Studying these low ... [more ▼] Large-scale mass redistribution in the terrestrial water storage (TWS) leads to changes in the low-degree spherical harmonic coefficients of the Earth's surface mass density field. Studying these low-degree fluctuations is an important task that contributes to our understanding of continental hydrology. In this study, we use global GNSS measurements of vertical and horizontal crustal displacements that we correct for atmospheric and oceanic effects, and use a set of modified basis functions similar to Clarke et al. (2007) to perform an inversion of the corrected measurements in order to recover changes in the coefficients of degree-0 (hydrological mass change), degree-1 (center of mass shift) and degree-2 (flattening of the Earth) caused by variations in the TWS over the period January 2003 - January 2015. We infer from the GNSS-derived degree-0 estimate an annual variation in total continental water mass with an amplitude of $(3.49 \pm 0.19) \times 10^{3}$ Gt and a phase of $70 \pm 3^{\circ}$ (implying a peak in early March), in excellent agreement with corresponding values derived from the Global Land Data Assimilation System (GLDAS) water storage model that amount to $(3.39 \pm 0.10) \times 10^{3}$ Gt and $71 \pm 2^{\circ}$, respectively. The degree-1 coefficients we recover from GNSS predict annual geocentre motion (i.e. the offset change between the center of common mass and the center of figure) caused by changes in TWS with amplitudes of $0.69 \pm 0.07$ mm for GX, $1.31 \pm 0.08$ mm for GY and $2.60 \pm 0.13$ mm for GZ. These values agree with GLDAS and estimates obtained from the combination of GRACE and the output of an ocean model using the approach of Swenson et al. (2008) at the level of about 0.5, 0.3 and 0.9 mm for GX, GY and GZ, respectively. Corresponding degree-1 coefficients from SLR, however, generally show higher variability and predict larger amplitudes for GX and GZ. The results we obtain for the degree-2 coefficients from GNSS are slightly mixed, and the level of agreement with the other sources heavily depends on the individual coefficient being investigated. The best agreement is observed for $T_{20}^C$ and $T_{22}^S$, which contain the most prominent annual signals among the degree-2 coefficients, with amplitudes amounting to $(5.47 \pm 0.44) \times 10^{-3}$ and $(4.52 \pm 0.31) \times 10^{-3}$ m of equivalent water height (EWH), respectively, as inferred from GNSS. Corresponding agreement with values from SLR and GRACE is at the level of or better than $0.4 \times 10^{-3}$ and $0.9 \times 10^{-3}$ m of EWH for $T_{20}^C$ and $T_{22}^S$, respectively, while for both coefficients, GLDAS predicts smaller amplitudes. Somewhat lower agreement is obtained for the order-1 coefficients, $T_{21}^C$ and $T_{21}^S$, while our GNSS inversion seems unable to reliably recover $T_{22}^C$. For all the coefficients we consider, the GNSS-derived estimates from the modified inversion approach are more consistent with the solutions from the other sources than corresponding estimates obtained from an unconstrained standard inversion. [less ▲] Detailed reference viewed: 244 (15 UL)High tilt susceptibility of the Scintrex CG-5 relative gravimeters ; ; Francis, Olivier et al in Journal of Geodesy (2014), 88(6), 617-622 Detailed reference viewed: 281 (8 UL)An improved sampling rule for mapping geopotential functions of a planet from a near polar orbit Weigelt, Matthias ; ; et al in Journal of Geodesy (2013), 87(2), 127-142 One of the limiting factors in the determination of gravity field solutions is the spatial sampling. Especially during phases, when the satellite repeats its own track after a short time, the spatial ... [more ▼] One of the limiting factors in the determination of gravity field solutions is the spatial sampling. Especially during phases, when the satellite repeats its own track after a short time, the spatial resolution will be limited. The Nyquist rule-of-thumb for mapping geopotential functions of a planet, also referred to as the Colombo–Nyquist rule-of-thumb, provides a limit for the maximum achievable degree of a spherical harmonic development for repeat orbits. We show in this paper that this rule is too conservative, and solutions with better spatial resolutions are possible. A new rule is introduced which limits the maximum achievable order (not degree!) to be smaller than the number of revolutions if the difference between the number of revolutions and the number of nodal days is of odd parity and to be smaller than half the number of revolutions if the difference is of even parity. The dependence on the parity is reflected in the eigenvalue spectrum of the normal matrix and becomes especially important in the presence of noise. The rule is based on applying the Nyquist sampling theorem separately in North–South and East–West direction. This is only possible for satellites in highly inclined orbits like champ and grace. Tables for these two satellite missions are also provided which indicate the passed and (in case of grace) expected repeat cycles and possible degradations in the quality of the gravity field solutions. [less ▲] Detailed reference viewed: 200 (4 UL)Comparative analysis of different environmental loading methods and their impacts on the GPS height time series ; Li, Zhao ; van Dam, Tonie et al in Journal of Geodesy (2013), 87(7), 687-703 Three different environmental loading methods are used to estimate surface displacements and correct nonlinear variations in a set of GPS weekly height time series. Loading data are provided by (1) Global ... [more ▼] Three different environmental loading methods are used to estimate surface displacements and correct nonlinear variations in a set of GPS weekly height time series. Loading data are provided by (1) Global Geophysical Fluid Center (GGFC), (2) Loading Model of Quasi-Observation CombinationAnalysis software (QLM) and (3) our own daily loading time series (we call itOMDfor optimum model data). We find that OMD has the smallest scatter in height across the selected 233 globally distributed GPS reference stations, GGFC has the next smallest variability, and QLM has the largest scatter. By removing the load-induced height changes from the GPS height time series, we are able to reduce the scatter on 74, 64 and 41 % of the stations using the OMD models, the GGFC model and QLM model respectively. We demonstrate that the discrepancy between the center of earth (CE) and the center of figure (CF) reference frames can be ignored. The most important differences between the predicted models are caused by (1) differences in the hydrol- ogy data from the National Center for Atmospheric Research (NCEP) vs. those from the Global Land Data Assimilation System (GLDAS), (2) grid interpolation, and (3) whether the topographic effect is removed or not. Both QLM and GGFC are extremely convenient tools for non-specialists to use to calculate loading effects. Due to the limitation ofNCEP reanalysis hydrology data compared with theGLDAS model, theGGFCdataset is much more suitable thanQLMfor applying environmental loading corrections to GPS height time series. However, loading results for Greenland from GGFC should be discarded since hydrology data from GLDAS in this region are not accurate. The QLM model is equivalent to OMD in Greenland and, hence, could be used as a complement to the GGFC product to model the load in this region. We find that the predicted loading from all three models cannot reduce the scatter of the height coordinate for some stations in Europe. [less ▲] Detailed reference viewed: 270 (14 UL)Nontidal ocean loading: amplitudes and potential effects in GPS height time series van Dam, Tonie ; ; et al in Journal of Geodesy (2012), 86(11), 1043-1057 Ocean bottom pressure (OBP) changes are caused by a redistribution of the ocean’s internal mass that are driven by atmospheric circulation, a change in the mass entering or leaving the ocean, and/or a ... [more ▼] Ocean bottom pressure (OBP) changes are caused by a redistribution of the ocean’s internal mass that are driven by atmospheric circulation, a change in the mass entering or leaving the ocean, and/or a change in the integrated atmospheric mass over the ocean areas. The only previous global analysis investigating the magnitude of OBP surface displacements used older OBP data sets (van Dam et al. in J Geophys Res 129:507–517, 1997). Since then significant improvements in meteorological forcing models used to predict OBP have been made, augmented by observations from satellite altimetry and expendable bathythermograph profiles. Using more recent OBP estimates from the Estimating the Circulation and Climate of the Ocean (ECCO) project, we reassess the amplitude of the predicted effect of OBP on the height coordinate time series from a global distribution of GPS stations. OBP-predicted loading effects display an RMS scatter in the height of between 0.2 and 3.7 mm, larger than previously reported but still much smaller (by a factor of 2) than the scatter observed due to atmospheric pressure loading. Given the improvement in GPS hardware and data analysis techniques, the OBP signal is similar to the precision of weekly GPS height coordinates. We estimate the effect of OBP on GPS height coordinate time series using the MIT reprocessed solution, mi1. When we compare the predicted OBP height time series with mi1, we find that the scatter is reduced over all stations by 0.1 mm on average with reductions as high as 0.7 mm at some stations. More importantly we are able to reduce the scatter on 65 % of the stations investigated. The annual component of the OBP signal is responsible for 80 % of the reduction in scatter on average.We find that stations located close to semi-enclosed bays or seas are affected by OBP loading to a greater extent than other stations. [less ▲] Detailed reference viewed: 222 (9 UL)Strategies to mitigate aliasing of loading signals while estimating GPS frame parameters ; van Dam, Tonie ; et al in Journal of Geodesy (2012), 86(1), 1-14 Although GNSS techniques are theoretically sensitive to the Earth center of mass, it is often preferable to remove intrinsic origin and scale information from the estimated station positions since they ... [more ▼] Although GNSS techniques are theoretically sensitive to the Earth center of mass, it is often preferable to remove intrinsic origin and scale information from the estimated station positions since they are known to be affected by systematic errors. This is usually done by estimating the parameters of a linearized similarity transformation which relates the quasi-instantaneous frames to a long-term frame such as the International Terrestrial Reference Frame (ITRF). It is well known that non-linear station motions can partially alias into these parameters. We discuss in this paper some procedures that may allow reducing these aliasing effects in the case of the GPS techniques. The options include the use of well-distributed sub-networks for the frame transformation estimation, the use of site loading corrections, a modification of the stochastic model by downweighting heights, or the joint estimation of the low degrees of the deformation field. We confirm that the standard approach consisting of estimating the transformation over the whole network is particularly harmful for the loading signals if the network is not well distributed. Downweighting the height component, using a uniform sub-network, or estimating the deformation field perform similarly in drastically reducing the amplitude of the aliasing effect. The application of these methods to reprocessed GPS terrestrial frames permits an assessment of the level of agreement between GPS and our loading model, which is found to be about 1.5 mm WRMS in height and 0.8 mm WRMS in the horizontal at the annual frequency. Aliased loading signals are not the main source of discrepancies between loading displacement models and GPS position time series. [less ▲] Detailed reference viewed: 140 (2 UL)Results of the first North American comparison of absolute gravimeters, NACAG-2010 ; Francis, Olivier ; et al in Journal of Geodesy (2012), 86 Detailed reference viewed: 127 (2 UL)Vertical deformations from homogeneously processed GRACE and global GPS long-term series ; ; van Dam, Tonie et al in Journal of Geodesy (2011) Temporal variations in the geographic distribution of surface mass cause surface displacements. Surface displacements derived from GRACE gravity field coefficient time series also should be observed in ... [more ▼] Temporal variations in the geographic distribution of surface mass cause surface displacements. Surface displacements derived from GRACE gravity field coefficient time series also should be observed in GPS coordinate time series, if both time series are sufficiently free of systematic errors. A successful validation can be an important contribution to climate change research, as the biggest contributors to mass variability in the system Earth include the movement of oceanic, atmospheric, and continental water and ice. In our analysis, we find that if the signals are larger than their precision, both geodetic sensor systems see common signals for almost all the 115 stations surveyed. Almost 80% of the stations have their signal WRMS decreased, when we subtract monthly GRACE surface displacements from those observed by GPS data. Almost all other stations are on ocean islands or small peninsulas, where the physically expected loading signals are very small. For a fair comparison, the data(79 months from September 2002 to April 2009) had to be treated appropriately: the GPS data were completely reprocessed with state-of-the-art models. We used an objective cluster analysis to identify and eliminate stations,where local effects or technical artifacts dominated the signals. In addition, it was necessary for both sets of results to be expressed in equivalent reference frames, meaning that net translations between the GPS and GRACE data sets had to be treated adequately. These data sets are then compared and statistically analyzed: we determine the stability (precision) of GRACEderived, monthly vertical deformation data to be ∼1.2 mm, using the data from three GRACE processing centers. We statistically analyze themean annual signals, computed from the GPS and GRACE series. There is a detailed discussion of the results for five overall representative stations, in order to help the reader to link the displayed criteria of similarity to real data. A series of tests were performed with the goal of explaining the remaining GPS–GRACE residuals. [less ▲] Detailed reference viewed: 168 (1 UL)The effect of using inconsistent ocean tidal loading models on GPS coordinate solutions ; ; van Dam, Tonie in Journal of Geodesy (2011) We use up to a 6-year span of GPS data from 85 globally distributed stations to compare solutions using ocean tidal loading (OTL) corrections computed in differ- ent reference frames: center of mass of ... [more ▼] We use up to a 6-year span of GPS data from 85 globally distributed stations to compare solutions using ocean tidal loading (OTL) corrections computed in differ- ent reference frames: center of mass of the solid Earth (CE), and center of mass of the Earth system (CM). We compare solution sets that differ only in the frame used for the OTL model computations, for three types of GPS solutions. In global solutions with all parameters including orbits estimated simultaneously, we find coordinate differences of ∼0.3mm between solutions using OTL computed in CM and OTL computed in CE. When orbits or orbits and clocks are fixed, larger biases appear if the user applies an OTL model inconsistent with that used to derive the orbit and clock products. Network solutions (orbits fixed, satellite clocks estimated) show differences smaller than 0.5 mm due to model inconsistency, but PPP solutions show distortions at the ∼1.3 mm level. The much larger effect on PPP solutions indicates that satellite clock estimates are sensitive to the OTL model applied. The time series of coordinate differences shows a strong spectral peak at a period of ∼14 days when inconsistent OTL models are applied and smaller peaks at ∼annual and ∼semi-annual periods, for both ambiguity-free and ambiguity-fixed solutions. These spurious coordinate variations disappear in solutions using consistent OTL mod- els. Users of orbit and clock products must ensure that they use OTL coefficients computed in the same reference frame as the OTL coefficients used by the analysis centers that produced the products they use; otherwise, systematic errors will be introduced into position solutions. All modern products should use loading models computed in the CM frame, but legacy products may require loading models computed in the CE frame. Analysts and authors need to document the frame used for all loading computations in product descriptions and papers. [less ▲] Detailed reference viewed: 145 (5 UL)Rapid re-convergences to ambiguity-fixed solutions in precise point-positioning ; ; et al in Journal of Geodesy (2010), 84(12), 705-714 Integer ambiguity resolution at a single station can be preformed if the fractional-cycle biases are separated from the ambiguity estimates in precise point positioning (PPP). Despite the improved ... [more ▼] Integer ambiguity resolution at a single station can be preformed if the fractional-cycle biases are separated from the ambiguity estimates in precise point positioning (PPP). Despite the improved positioning accuracy by such integer resolutions, the convergence to an ambiguity-fixed solution normally requires at least a few tens of minutes. More importantly, such convergences can repeatedly occur on the occasion of losses of tracking locks for many satellites if an open sky-view is not constantly available, consequently totally destroying the practicability of real-time PPP. In this study, in case of such re-convergences, we develop a method in which ionospheric delays are precisely predicted to significantly accelerate integer ambiguity resolutions. The effectiveness of this method consists in two aspects: First, wide-lane ambiguities can be rapidly resolved using the ionosphere- corrected wide-lane measurements, instead of the noisy Melbourne-Wübbena combination measurements; second, narrow-lane ambiguity resolution can be accelerated under the tight constraints derived from the ionosphere-corrected unambiguous wide-lane measurements. In the tests at 90 static stations suffering from simulated total loss of tracking locks, 93.3% and 95.0% of re- convergences to wide-lane and narrow-lane ambiguity resolutions can be achieved within 5 s, respectively, even though the time latency for the predicted ionospheric delays is up to 180 s. In the tests at a mobile van moving in a GPS-adverse environment where satellite number significantly decreases and cycle slips frequently occur, only when the predicted ionospheric delays are applied can the rate of ambiguity-fixed epochs be dramatically improved from 7.7% to 93.6% of all epochs. Therefore, this method can potentially relieve the unrealistic requirement of a continuous open sky- view by most PPP applications and improve the practicability of real-time PPP. [less ▲] Detailed reference viewed: 138 (1 UL)Integer ambiguity resolution in precise point poistioning: method comparison ; ; et al in Journal of Geodesy (2010), 84(9), 569-581 Integer ambiguity resolution at a single receiver can be implemented by applying improved satellite products where the fractional-cycle biases (FCBs) have been separated from the integer ambiguities in a ... [more ▼] Integer ambiguity resolution at a single receiver can be implemented by applying improved satellite products where the fractional-cycle biases (FCBs) have been separated from the integer ambiguities in a network solution. One method to achieve these products is to estimate the FCBs by averaging the fractional parts of the float ambiguity estimates, and the other is to estimate the integer-recovery clocks by fixing the undifferenced ambiguities to integers in advance. In this paper, we theoretically prove the equivalence of the ambiguity-fixed position estimates derived from these two methods by assuming that the FCBs are hardware-dependent and only they are assimilated into the clocks and ambiguities. To verify this equivalence, we implement both methods in the Position and Navigation Data Analyst software to process 1 year of GPS data from a global network of about 350 stations. The mean biases between all daily position estimates derived from these two methods are only 0.2, 0.1 and 0.0 mm, whereas the standard deviations of all position differences are only 1.3, 0.8 and 2.0 mm for the East, North and Up components, respectively. Moreover, the differences of the position repeatabilities are below 0.2 mm on average for all three components. The RMS of the position estimates minus those from the International GNSS Service weekly solutions for the former method differs by below 0.1 mm on average for each component from that for the latter method. Therefore, considering the recognized millimeter-level precision of current GPS-derived daily positions, these statistics empirically demonstrate the theoretical equivalence of the ambiguity-fixed position estimates derived from these two methods. In practice, we note that the former method is compatible with current official clock-generation methods, whereas the latter method is not, but can potentially lead to slightly better positioning quality. [less ▲] Detailed reference viewed: 167 (4 UL)On the influence of the ground track on the gravity field recovery from high-low satellite-to-satellite tracking missions: CHAMP monthly gravity field recovery using the energy balance approach revisited Weigelt, Matthias ; ; in Journal of Geodesy (2009), 83(12), 1131--1143 Detailed reference viewed: 85 (3 UL)A method of error adjustment for marine gravity with application to Mean Dynamic Topography in the northern North Atlantic Hunegnaw, Addisu ; ; in Journal of Geodesy (2009), 83(2), 161-174 Detailed reference viewed: 135 (8 UL)Is the instrumental drift of superconducting gravimeters a linear or exponential function of time? ; Francis, Olivier in Journal of Geodesy (2007), 81(5), 337-344 Detailed reference viewed: 141 (5 UL) |
||