References of "Bordas, Stéphane 50000969"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailEnergy minimizing multi-crack growth in linear elastic fracture using the extended finite element method
Sutula, Danas UL; Bordas, Stéphane UL

in ACME-­UK 2016 24th Conference on Computational Mechanics (2016, March 31)

We investigate multiple fracture evolution under quasi-static conditions in an isotropic linear elastic solid based on the principle of minimum potential elastic energy in the framework of the extended ... [more ▼]

We investigate multiple fracture evolution under quasi-static conditions in an isotropic linear elastic solid based on the principle of minimum potential elastic energy in the framework of the extended finite element method. The technique enables a minimization of the potential energy with respect to all crack increment directions. Results show that the maximum hoop stress criterion and the energy minimization approach converge to the same fracture path. It is found that the converged solution lies in between the fracture paths obtained by each criterion for coarser meshes. This presents an opportunity to estimate an upper and lower bound of the true fracture path as well as an error on the crack path. [less ▲]

Detailed reference viewed: 153 (4 UL)
Full Text
Peer Reviewed
See detailBlood flow simulation using smoothed particle hydrodynamics: application to thrombus generation
AL-SAAD, Mohammed; Kulasegaram, Sivakumar; Bordas, Stéphane UL

Scientific Conference (2016, March 31)

Blood flow rheology is considered to be a complex phenomenon. In order to understand the characteristics of blood flow, it is important to identify key parameters those influence the flow behaviour of ... [more ▼]

Blood flow rheology is considered to be a complex phenomenon. In order to understand the characteristics of blood flow, it is important to identify key parameters those influence the flow behaviour of blood. Further, the characterisation of blood flow will also enable us to understand flow parameters associated with physiological conditions such as atherosclerosis. Thrombosis plays a crucial role in atherosclerosis, or to stop bleeding when a blood vessel is injured. This article focuses on using meshless particle-based Lagrangian numerical technique named smoothed particles hydrodynamic (SPH) method to study the flow behaviour of blood and to explore flow condition that induces formation of thrombus in a blood vessel. Due its simplicity and effectiveness, the SPH method is employed here to simulate the process of thrombogenesis under the influence of various blood flow parameters. In the present SPH simulation, blood is modelled by particles that have characteristics of plasma and of platelets. To simulate coagulation of platelets which forms thrombus, the adhesion and aggregation process of platelets are modelled by an effective inter-particle force model. With these models, platelet motion in the flowing blood and platelet adhesion and aggregation are effectively coupled with viscous blood flow. In this study, the adhesion and aggregation of blood particles are performed on a bifurcated artery under a various low Reynolds number scenarios. The results are compared with experimental results and a good agreement is found between the simulated and experimental results. [less ▲]

Detailed reference viewed: 433 (14 UL)
Full Text
See detailIsogeometric boundary element methods for linear elastic fracture mechanics
Peng, Xuan; Atroshchenko, Elena; Kerfriden, Pierre et al

Report (2016)

Detailed reference viewed: 427 (20 UL)
Full Text
See detailAn introduction to Bayesian inference for material parameter identification
Rappel, Hussein UL; Beex, Lars UL; Hale, Jack UL et al

Presentation (2016, February 04)

Detailed reference viewed: 162 (17 UL)
Full Text
See detail2015 Lab report - Legato report 001
Bordas, Stéphane UL

Report (2016)

Detailed reference viewed: 499 (12 UL)
Full Text
Peer Reviewed
See detailStable 3D extended finite elements with higher order enrichment for accurate non planar fracture
Agathos, Konstantinos UL; Chatzi, Eleni; Bordas, Stéphane UL

in Computer Methods in Applied Mechanics and Engineering (2016), 306

An extended finite element method (XFEM) for three dimensional (3D) non-planar linear elastic fracture is introduced, which provides optimal convergence through the use of enrichment in a fixed area ... [more ▼]

An extended finite element method (XFEM) for three dimensional (3D) non-planar linear elastic fracture is introduced, which provides optimal convergence through the use of enrichment in a fixed area around the crack front, while also improving the conditioning of the resulting system matrices. This is achieved by fusing a novel form of enrichment with existing blending techniques. Further, the adoption of higher order terms of theWilliams expansion is also considered and the effects in the accuracy and conditioning of the method are studied. Moreover, some problems regarding the evaluation of stress intensity factors (SIFs) and element partitioning are dealt with. The accuracy and convergence properties of the method as well as the conditioning of the resulting stiffness matrices are investigated through the use of appropriate benchmark problems. It is shown that the proposed approach provides increased accuracy while requiring, for all cases considered, a reduced number of iterations for the solution of the resulting systems of equations. The positive impact of geometrical enrichment is further demonstrated in the accuracy of the computed SIFs where, for the examined cases, an improvement of up to 40% is achieved. [less ▲]

Detailed reference viewed: 123 (3 UL)
Full Text
See detailReducing non-linear PDEs using a reduced integration proper orthogonal decomposition method
Schenone, Elisa; Hale, Jack UL; Beex, Lars UL et al

Scientific Conference (2016)

Detailed reference viewed: 148 (15 UL)
Full Text
Peer Reviewed
See detailA fast, certified and "tuning free" two-field reduced basis method for the metamodelling of affinely-parametrised elasticity problems
Hoang, K. C.; Kerfriden, P.; Bordas, Stéphane UL

in Computer Methods in Applied Mechanics and Engineering (2016), 298

This paper proposes a new reduced basis algorithm for the metamodelling of parametrised elliptic problems. The developments rely on the Constitutive Relation Error (CRE), and the construction of separate ... [more ▼]

This paper proposes a new reduced basis algorithm for the metamodelling of parametrised elliptic problems. The developments rely on the Constitutive Relation Error (CRE), and the construction of separate reduced order models for the primal variable (displacement) and flux (stress) fields. A two field greedy sampling strategy is proposed to construct these two fields simultaneously and in an efficient manner: at each iteration, one of the two fields is enriched by increasing the dimension of its reduced space in such a way that the CRE is minimised. This sampling strategy is then used as a basis to construct goal-oriented reduced order modelling. The resulting algorithm is certified and “tuning free”: the only requirement from the engineer is the level of accuracy that is desired for each of the outputs of the surrogate. It is also shown to be significantly more efficient in terms of computational expense than competing methodologies. [less ▲]

Detailed reference viewed: 172 (18 UL)
Full Text
Peer Reviewed
See detailModelling interfacial cracking with non-matching cohesive interface elements
Nguyen, Viet Ha UL; Nguyen, Chi Thanh; Bordas, Stéphane UL et al

in Computational Mechanics (2016), 58(5), 731-746

Interfacial cracking occurs in many engineering problems such as delamination in composite laminates, matrix/interface debonding in fibre reinforced composites etc. Computational modelling of these ... [more ▼]

Interfacial cracking occurs in many engineering problems such as delamination in composite laminates, matrix/interface debonding in fibre reinforced composites etc. Computational modelling of these interfacial cracks usually employs compatible or matching cohesive interface elements. In this paper, incompatible or non-matching cohesive interface elements are proposed for interfacial fracture mechanics problems. They allow non-matching finite element discretisations of the opposite crack faces thus lifting the constraint on the compatible discretisation of the domains sharing the interface. The formulation is based on a discontinuous Galerkin method and works with both initially elastic and rigid cohesive laws. The proposed formulation has the following advantages compared to classical interface elements: (i) non-matching discretisations of the domains and (ii) no high dummy stiffness. Two and three dimensional quasi-static fracture simulations are conducted to demonstrate the method. Our method not only simplifies the meshing process but also it requires less computational demands, compared with standard interface elements, for problems that involve materials/solids having a large mismatch in stiffnesses. [less ▲]

Detailed reference viewed: 124 (3 UL)
Full Text
Peer Reviewed
See detailOn the convergence of stresses in fretting fatigue
Pereira, Kyvia; Bordas, Stéphane UL; Tomar, Satyendra UL et al

in Materials (2016), 9(8),

Fretting is a phenomenon that occurs at the contacts of surfaces that are subjected to oscillatory relative movement of small amplitudes. Depending on service conditions, fretting may significantly reduce ... [more ▼]

Fretting is a phenomenon that occurs at the contacts of surfaces that are subjected to oscillatory relative movement of small amplitudes. Depending on service conditions, fretting may significantly reduce the service life of a component due to fretting fatigue. In this regard, the analysis of stresses at contact is of great importance for predicting the lifetime of components. However, due to the complexity of the fretting phenomenon, analytical solutions are available for very selective situations and finite element (FE) analysis has become an attractive tool to evaluate stresses and to study fretting problems. Recent laboratory studies in fretting fatigue suggested the presence of stress singularities in the stick-slip zone. In this paper, we constructed finite element models, with different element sizes, in order to verify the existence of stress singularity under fretting conditions. Based on our results, we did not find any singularity for the considered loading conditions and coefficients of friction. Since no singularity was found, the present paper also provides some comments regarding the convergence rate. Our analyses showed that the convergence rate in stress components depends on coefficient of friction, implying that this rate also depends on the loading condition. It was also observed that errors can be relatively high for cases with a high coefficient of friction, suggesting the importance of mesh refinement in these situations. Although the accuracy of the FE analysis is very important for satisfactory predictions, most of the studies in the literature rarely provide information regarding the level of error in simulations. Thus, some recommendations of mesh sizes for those who wish to perform FE analysis of fretting problems are provided for different levels of accuracy. [less ▲]

Detailed reference viewed: 114 (2 UL)
Full Text
See detailDiscrete mechanical models and upscaling techniques for discrete materials
Beex, Lars UL; Bordas, Stéphane UL

Poster (2016)

Numerous natural and man-made materials are essentially discrete structures at the mesoscale or microscale (see Fig. 1). Discrete mechanical models can be formulated to capture typical mechanical ... [more ▼]

Numerous natural and man-made materials are essentially discrete structures at the mesoscale or microscale (see Fig. 1). Discrete mechanical models can be formulated to capture typical mechanical phenomena arising from this discreteness. Failure in these materials, which often starts with the fracture of an individual bond, can be predicted based on the small-scale mechanics with these models. For failure, but also for non-local mechanics, no phenomenological descriptions are required in these models. This makes them more predictive than constitutive material models for this type of materials. [less ▲]

Detailed reference viewed: 131 (5 UL)
Full Text
See detailUsing Bayesian inference to recover the material parameters of a heterogeneous hyperelastic body
Hale, Jack UL; Farrell, Patrick; Bordas, Stéphane UL

Scientific Conference (2016)

We present a method for calculating a Bayesian uncertainty estimate on the recovered material parameters of a heterogeneous geometrically non-linear hyperelastic body. We formulate the problem in the ... [more ▼]

We present a method for calculating a Bayesian uncertainty estimate on the recovered material parameters of a heterogeneous geometrically non-linear hyperelastic body. We formulate the problem in the Bayesian inference framework [1]; given noisy and sparse observations of a body, some prior knowledge on the parameters and a parameter-to-observable map the goal is to recover the posterior distribution of the parameters given the observations. In this work we primarily focus on the challenges of developing dimension-independent algorithms in the context of very large inverse problems (tens to hundreds of thousands of parameters). Critical to the success of the method is viewing the problem in the correct infinite- dimensional function space setting [2]. With this goal in mind, we show the use of automatic symbolic differentiation techniques to construct high-order adjoint models [3], scalable maximum a posteriori (MAP) estimators, and efficient low-rank update methods to calculate credible regions on the posterior distribution [4]. [less ▲]

Detailed reference viewed: 147 (15 UL)
Full Text
Peer Reviewed
See detailHybrid mesh/particle meshless method for modeling geological flows with discontinuous transport properties
Bourantas, Georgios UL; Lavier, Luc; van Dam, Tonie UL et al

E-print/Working paper (2016)

In the present paper, we introduce the Finite Difference Method-Meshless Method (FDM-MM) in the context of geodynamical simulations. The proposed numerical scheme relies on the well-established FD method ... [more ▼]

In the present paper, we introduce the Finite Difference Method-Meshless Method (FDM-MM) in the context of geodynamical simulations. The proposed numerical scheme relies on the well-established FD method along with the newly developed “meshless” method and, is considered as a hybrid Eulerian/Lagrangian scheme. Mass, momentum, and energy equations are solved using an FDM method, while material properties are distributed over a set of markers (particles), which represent the spatial domain, with the solution interpolated back to the Eulerian grid. The proposed scheme is capable of solving flow equations (Stokes flow) in uniform geometries with particles, “sprinkled” in the spatial domain and is used to solve convection- diffusion problems avoiding the oscillation produced in the Eulerian approach. The resulting algebraic linear systems were solved using direct solvers. Our hybrid approach can capture sharp variations of stresses and thermal gradients in problems with a strongly variable viscosity and thermal conductivity as demonstrated through various benchmarking test cases. The present hybrid approach allows for the accurate calculation of fine thermal structures, offering local type adaptivity through the flexibility of the particle method. [less ▲]

Detailed reference viewed: 251 (17 UL)
Full Text
Peer Reviewed
See detailReduced order method combined with domain decomposition
Baroli, Davide UL; Bordas, Stéphane UL; Beex, Lars UL et al

Scientific Conference (2016)

The complexities and nonlinearity of the PDEs in biomechanics and the requirement for rapid solution pose significant challenges for the biomedical applications. For these reasons, different methods for ... [more ▼]

The complexities and nonlinearity of the PDEs in biomechanics and the requirement for rapid solution pose significant challenges for the biomedical applications. For these reasons, different methods for reducing the complexity and solving efficiently have been investigated in the last 15 years. At the state-ofart, due to spatial different behaviours and highly accurate simulation required, a decomposition of physical domain is deeply investigated in reduced basis element method approaches. In this talk, the main focus is devoted to present suitable reduction strategy which combines a domain decomposition approach and a proper interface management with a proper orthogonal decomposition. We provide numerical tests implemented in DOLFIN[4] using SLEPc [3] and PETSc [1, 2] that show a speed up in forward runtime model. [less ▲]

Detailed reference viewed: 128 (8 UL)
Full Text
See detailC++ implementation of 2D PHT splines
Peng, Xuan; Bordas, Stéphane UL

Learning material (2016)

Detailed reference viewed: 171 (4 UL)
Full Text
See detail2d PHT splines implementation in C++
Peng, Xuan; Bordas, Stéphane UL

Learning material (2016)

Detailed reference viewed: 154 (4 UL)
Full Text
Peer Reviewed
See detailImplementation of regularized isogeometric boundary element methods for gradient-based shape optimization in two-dimensional linear elasticity
Haojie, Lian; Pierre, Kerfriden; Bordas, Stéphane UL

in International Journal for Numerical Methods in Engineering (2015)

Detailed reference viewed: 254 (16 UL)
Full Text
Peer Reviewed
See detailMulti-scale methods for fracture: model learning across scales, digital twinning and factors of safety
Bordas, Stéphane UL; Beex, Lars UL; Kerfriden, Pierre et al

Scientific Conference (2015, November 18)

Authors: S. P. A. Bordas, L. A. A. Beex, P. Kerfriden, D. A. Paladim, O. Goury, A. Akbari, H. Rappel  Multi-scale methods for fracture: model learning across scales, digital twinning and factors of safety ... [more ▼]

Authors: S. P. A. Bordas, L. A. A. Beex, P. Kerfriden, D. A. Paladim, O. Goury, A. Akbari, H. Rappel  Multi-scale methods for fracture: model learning across scales, digital twinning and factors of safety Fracture and material instabilities originate at spatial scales much smaller than that of the structure of interest: delamination, debonding, fibre breakage, cell-wall buckling, are examples of nano/micro or meso-scale mechanisms which can lead to global failure of the material and structure. Such mechanisms cannot, for computational and practical reasons, be accounted at structural scale, so that acceleration methods are necessary.  We review in this presentation recently proposed approaches to reduce the computational expense associated with multi-scale modelling of fracture. In light of two particular examples, we show connections between algebraic reduction (model order reduction and quasi-continuum methods) and homogenisation-based reduction. We open the discussion towards suitable approaches for machine-learning and Bayesian statistical based multi-scale model selection. Such approaches could fuel a digital-twin concept enabling models to learn from real-time data acquired during the life of the structure, accounting for “real” environmental conditions during predictions, and, eventually, moving beyond the “factors of safety” era. [less ▲]

Detailed reference viewed: 408 (19 UL)
Full Text
See detailMulti-scale methods for fracture: model learning across scales, digital twinning and factors of safety
: primer on Bayesian Inference
Bordas, Stéphane UL; Hale, Jack UL; Beex, Lars UL et al

Speeches/Talks (2015)

Fracture and material instabilities originate at spatial scales much smaller than that of the structure of interest: delamination, debonding, fibre break- age, cell-wall buckling, are examples of nano ... [more ▼]

Fracture and material instabilities originate at spatial scales much smaller than that of the structure of interest: delamination, debonding, fibre break- age, cell-wall buckling, are examples of nano/micro or meso-scale mechanisms which can lead to global failure of the material and structure. Such mech- anisms cannot, for computational and practical reasons, be accounted at structural scale, so that acceleration methods are necessary. We review in this presentation recently proposed approaches to reduce the computational expense associated with multi-scale modelling of frac- ture. In light of two particular examples, we show connections between algebraic reduction (model order reduction and quasi-continuum methods) and homogenisation-based reduction. We open the discussion towards suitable approaches for machine-learning and Bayesian statistical based multi-scale model selection. Such approaches could fuel a digital-twin concept enabling models to learn from real-time data acquired during the life of the structure, accounting for “real” environmental conditions during predictions, and, eventually, moving beyond the era of factors of safety. [less ▲]

Detailed reference viewed: 199 (5 UL)