Two-state switchable plasmonic tweezers for dynamic manipulation of nano-objects

in Nanoscale (2020), 12

In this work, we present a plasmonic platform capable of trapping nano-objects in two different spatial configurations. The switch between the two trapping states, localized on the tip and on the outer ... [more ▼]

In this work, we present a plasmonic platform capable of trapping nano-objects in two different spatial configurations. The switch between the two trapping states, localized on the tip and on the outer wall of a vertical gold nanochannel, can be activated by varying the focusing position of the excitation laser along the main axis of the nanotube. We show that the switching of the trapping site is induced by changes in the distribution of the electromagnetic field and of the trapping force. The “inner” and “outer” trapping states are characterized by a static and a dynamic behavior respectively, and their stiffness is measured by analyzing the positions of the trapped specimens as a function of time. In addition, we demonstrate that the stiffness of the static state is high enough to trap particles with diameter as small as 40 nm. These results show a simple, controllable way to generate a switchable two-state trapping regime, which could be used as a model for the study of dynamic trapping or as a mechanism for the development of nanofluidic devices. [less ▲]

Site-selective functionalization of plasmonic nanopores for enhanced fluorescence emission rate and Förster Resonance Energy Transfer

in Nanoscale Advances (2019), 1(6), 2454-2461

In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with fluorescent dyes. Using an easy and robust fabrication method, we manage to build plasmonic rings on ... [more ▼]

In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with fluorescent dyes. Using an easy and robust fabrication method, we manage to build plasmonic rings on top of dielectric nanotubes with different inner diameters. The modulation of the dimension of the nanopores allows us to tailor their field confinement and their Purcell Factor in the visible spectral range. In order to investigate how the changes in geometry influence the fluorescence emission rate efficiency, thiol-conjugated dyes are anchored on the plasmonic ring, thus forming a functional nanopore. We study the lifetime of ATTO 520 and ATTO 590 attached in two different configurations: single dye, and FRET pair. For the single dye configuration, we observe that the lifetime of both single dyes decreases as the size of the nanopore is reduced. The smallest nanopores yield an experimental Purcell Factor of 6. For the FRET pair configuration, we measure two regimes. For large nanopore sizes, the FRET efficiency remains constant. Whereas for smaller sizes, the FRET efficiency increases from 30 up to 45% with a decrease of the nanopore size. These findings, which have been supported by numerical simulations, may open new perspectives towards energy transfer engineering in plasmonic nanopores with potential applications in photonics and biosensing, in particular in single-molecule detection and sequencing.In this work, we use a site-selective functionalization strategy to decorate plasmonic nanopores with fluorescent dyes. Using an easy and robust fabrication method, we manage to build plasmonic rings on top of dielectric nanotubes with different inner diameters. The modulation of the dimension of the nanopores allows us to tailor their field confinement and their Purcell Factor in the visible spectral range. In order to investigate how the changes in geometry influence the fluorescence emission rate efficiency, thiol-conjugated dyes are anchored on the plasmonic ring, thus forming a functional nanopore. We study the lifetime of ATTO 520 and ATTO 590 attached in two different configurations: single dye, and FRET pair. For the single dye configuration, we observe that the lifetime of both single dyes decreases as the size of the nanopore is reduced. The smallest nanopores yield an experimental Purcell Factor of 6. For the FRET pair configuration, we measure two regimes. For large nanopore sizes, the FRET efficiency remains constant. Whereas for smaller sizes, the FRET efficiency increases from 30 up to 45% with a decrease of the nanopore size. These findings, which have been supported by numerical simulations, may open new perspectives towards energy transfer engineering in plasmonic nanopores with potential applications in photonics and biosensing, in particular in single-molecule detection and sequencing. [less ▲]

A hybrid metal–dielectric zero mode waveguide for enhanced single molecule detection

in Chemical Communications (2019)

We fabricated hybrid metal–dielectric nanoslots and measured their optical response at three different wavelengths. The nanostructure is fabricated on a bilayer film formed by the sequential deposition of ... [more ▼]

We fabricated hybrid metal–dielectric nanoslots and measured their optical response at three different wavelengths. The nanostructure is fabricated on a bilayer film formed by the sequential deposition of silicon and gold on a transparent substrate. The optical characterization is done via fluorescence spectroscopy measurements. We characterized the fluorescence enhancement, as well as the lifetime and the detection volume reduction for each wavelength. We observe that the hybrid metal–dielectric nanoslots behave as enhanced zero mode waveguides in the near-infrared spectral region. Their detection volume is such that they can perform enhanced single-molecule detection at tens of μM. We compared their behavior with that of a golden ZMW, and we demonstrated that the dielectric silicon layer improves both the optical performance and the stability of the device. [less ▲]

Plasmonic zero mode waveguide for highly confined and enhanced fluorescence emission

in Nanoscale (2018), 10(36), 17362-17369

We fabricate a plasmonic nanoslot that is capable of performing enhanced single molecule detection at 10 muM concentrations. The nanoslot combines the tiny detection volume of a zero-mode waveguide and ... [more ▼]

We fabricate a plasmonic nanoslot that is capable of performing enhanced single molecule detection at 10 muM concentrations. The nanoslot combines the tiny detection volume of a zero-mode waveguide and the field enhancement of a plasmonic nanohole. The nanoslot is fabricated on a bi-metallic film formed by the sequential deposition of gold and aluminum on a transparent substrate. Simulations of the structure yield an average near-field intensity enhancement of two orders of magnitude at its resonant frequency. Experimentally, we measure the fluorescence stemming from the nanoslot and compare it with that of a standard aluminum zero-mode waveguide. We also compare the detection volume for both structures. We observe that while both structures have a similar detection volume, the nanoslot yields a 25-fold fluorescence enhancement. [less ▲]