Browse ORBi

- What it is and what it isn't
- Green Road / Gold Road?
- Ready to Publish. Now What?
- How can I support the OA movement?
- Where can I learn more?

ORBi

A Forcing Fictitious Domain Method to Simulate Fluid-particle Interaction of Particles with Super-quadric Shape Wu, Mingqiu ; Peters, Bernhard ; et al in Powder Technology (2019), 360(15/January 2020), 264-277 In this work, we develop a new framework to directly simulate super-quadric (SQ) particles in fluid flows based on a forcing fictitious domain method. Specifically, a super-quadric particle function is ... [more ▼] In this work, we develop a new framework to directly simulate super-quadric (SQ) particles in fluid flows based on a forcing fictitious domain method. Specifically, a super-quadric particle function is used to represent the particle shape of different types in a flexible manner. The immersion of particles in the fluid is handled by imposing rigid solid body motion in the particle domain, as well as adding a local forcing term to the Navier-Stokes equations by calculating the integral of both the pressure gradient and the particle velocity over the whole particle domain. Particle shapes are varied by changing the five super-quadric parameters of the SQ equation. We validate our approach by performing simulations of flow around a fixed particle and sedimentation of a particle in a channel in 2D and 3D. The validation results indicate that the current simulation results show a good agreement with experimental data. Moreover, our method is used to study the flow around fixed non-spherical particles with different orientations and particle Reynolds numbers. The particle Reynolds numbers vary from 0.1 to 3000. The super-quadric particles exemplarily considered in the current study are an ellipsoidal particle and fibre-like particles. We present the results for drag and lift coefficients at different particle orientations and different particle Reynolds numbers. The obtained results lay the foundation to apply the framework to flown through multi-particle systems in the near future. [less ▲] Detailed reference viewed: 189 (57 UL)Comparison of numerical schemes for 3D Lattice Boltzmann simulations of moving rigid particles in thermal fluid flows ; ; Wu, Mingqiu et al in Powder Technology (2019), 356(3), 528-546 The Lattice Boltzmann method is an efficient numerical method for direct numerical simulations of particulate flows. For a variety of applications not only the flow but also the heat transfer between ... [more ▼] The Lattice Boltzmann method is an efficient numerical method for direct numerical simulations of particulate flows. For a variety of applications not only the flow but also the heat transfer between particle and fluid plays an important role. While for non-thermal flows numerous techniques to handle the moving boundaries of particles have been developed, appropriate techniques for the thermal Lattice Boltzmann method are still lacking. The following three issues are of special importance. First, the thermal boundary conditions (Dirichlet or Neumann) have to be fulfilled on the particle surface. Second, reasonable values have to be found for temperature distributions in grid nodes that are uncovered by moving particles. Third, the heat transfer between particulate and fluid phase has to be evaluated in many application, since it is an essential quantity of interest. In this work, we present new numerical schemes for all of these three key aspects. They rely to a great degree on existing schemes for the non-thermal Lattice Botzmann method. In four benchmark cases we assess which of them are the most favourable and we also show to what extend schemes based on the same principles behave similarly or differently in the flow and heat transfer simulation. The results demonstrate that the proposed techniques deliver accurate results and allow us to recommend the most advantageous approach. [less ▲] Detailed reference viewed: 167 (45 UL)A forcing fictitious domain/immersed boundary method for super-quadric shape of particulate flow simulation of cementitious material Wu, Mingqiu ; Peters, Bernhard ; in International Centre for NumericalMethods in Engineering (2019) Fictitious domain/immersed boundary method (FD/IBM) has recently been used for particulate flows and complex fluid-solid interaction problems. The advantage of FD/IBM over the body- fitted method is that ... [more ▼] Fictitious domain/immersed boundary method (FD/IBM) has recently been used for particulate flows and complex fluid-solid interaction problems. The advantage of FD/IBM over the body- fitted method is that it substantially simplifies grid generation for immersed geometries, and it is easier to handle moving boundary situations. FD/IBM even allows the use of a stationary and non- deformation background mesh, as well as it reduces the cost of computation by avoiding generation of a body-fitted mesh for each time step. In this work, we develop a new platform to directly simulate super-quadric (SQ) particles in fluid based on a forcing fictitious domain method. Specifically, a super-quadric particle function is used to represent particle with varying shapes and sizes as encountered for concrete and mortar. The immersion of particles in fluid is handled by imposing a rigidity solid body motion in the particle domain, as well as adding a forcing term to the Navier-stokes equation by integral of pressure gradient and particle related velocity over the whole particle domain. Particle shapes are given by changing the super-quadric parameters of SQ equation. Particle motions, which occur during pumping of cementitious material, can be calculated and tracked by solving Newton’s equations of motions using the extended discrete element method (XDEM)[4] while the data of fluid flow properties are obtained by solving the Navier-Stokes equations which govern the fluid phase. Hence, a particle interface resolving solver is developed by coupling XDEM and IBM. We validate our solver by performing flow around particles and free falling of a particle in the channel at different parameters in 2D and 3D. The final objective of this work is to develop a particle-resolved direct numerical simulation platform to predict highly packed fluids with different shapes of particles and over a wide range of particle sizes. [less ▲] Detailed reference viewed: 116 (25 UL)Comparison of boundary treatments in thermal Lattice Boltzmann simulations of moving particles in fluids ; ; et al in Particle Technology Series (2019, April 09) Various numerical schemes have been developed in recent years to simulate particle-laden flows. The Lattice Boltzmann method (LBM) has emerged as an efficient tool for direct numerical simulations in ... [more ▼] Various numerical schemes have been developed in recent years to simulate particle-laden flows. The Lattice Boltzmann method (LBM) has emerged as an efficient tool for direct numerical simulations in which the flow field around the particles can be fully resolved. In the thermal Lattice Boltzmann method not only the flow field but also the temperature field is calculated by using one distribution function for the fluid density and one for the fluid temperature. The treatment of curved solid-fluid boundaries is crucial for the simulation of particulate flows with this method. While several aspects of moving boundaries have been discussed in previous studies for the non-thermal LBM, it remains unknown to what extend these findings are transferable to the thermal LBM. In this work, we consider a 3D thermal LBM with a multiple-relaxation-time (MRT) collision operator and compare different techniques that can be applied to handle the moving boundary. There are three key aspects in the LBM that need to be considered at the boundary: the momentum exchange method calculating the drag force acting upon particles, the bounce-back scheme determining the bounce-back of density distribution functions at a boundary, and the refilling algorithm assigning a value to the unknown density distribution functions at lattice nodes uncovered by the particle. First, we demonstrate how the choice of the technique to address these problems in the flow field impacts the results for the temperature field in the thermal LBM. In a second step, we focus on the thermal side where similar techniques need to be applied. We compare different refilling strategies and bounce-back schemes for the temperature distribution functions and assess heat transfer calculation methods for the particle surface. The performance of these implementations is evaluated by comparing the simulation results in terms of accuracy and stability for a moving particle in a channel flow with a Galilean invariant reference system in which the particle’s position is fixed. We conduct this analysis for various Reynolds and Prandtl numbers to test the applicability of the individual techniques to varying flow conditions. Moreover, we demonstrate the potential of the implementation found to be superior by considering a more complex flow field in a particle packing. Our findings serve as a guideline for choosing suitable moving boundary treatments in thermal LBM simulations of particle-laden flows. [less ▲] Detailed reference viewed: 150 (26 UL)An interface resolved immersed boundary method in XDEM for particulate flow simulations Wu, Mingqiu ; Peters, Bernhard ; et al in International Congress on Particle Technology (2019, April 09) immersed boundary method (IBM) has recently been used for particulate flows and complex fluid-solid interaction problems. The IBM was first introduced by Peskin to simulate blood flow in a beating heart ... [more ▼] immersed boundary method (IBM) has recently been used for particulate flows and complex fluid-solid interaction problems. The IBM was first introduced by Peskin to simulate blood flow in a beating heart. Later it has been extended for a different range of applications. The advantages of IBM over the body-fitted method is that it substantially simplified grid generation for immersed geometries, and it is easier to handle moving boundary situations. IBM even allows the use of a stationary and non-deformation background mesh, as well as it reduces the cost of computation by avoiding generation of a body-fitted mesh for each time step. However, the IBM approach is not straightforward to implement and it requires special techniques for cut-off boundary cells as well as special techniques for data point interpolations. Generally, the IBM is classified into two approaches based on the methods of imposing the boundary condition in the immersed body. The first approach is called fictitious domain method with continuous forcing scheme which employs a distributed forcing function to impose a rigidity boundary condition in the solid particle domain. The second one is the discrete forcing approach, which enables a sharp interface to represent the immersed surface. The IBM discussed in this work is a combination of these above two approaches: we first employ the continuous forcing scheme to get a first-step approximation of the immersed body, then use an interpolation polynomial to impose a desired accurate physical boundary for each immersed boundary point based on a least square interpolation reconstruction scheme. Particle motions can be calculated and tracked by solving Newton’s equations of motions using the extended discrete element method (XDEM) while the data of fluid flow properties are obtained by solving the Navier-Stokes equations which govern the fluid phase. Combined this leads to the basic concept of DEM-CFD coupling. Therefore, a particle interface resolved simulation solver is developed by coupling the XDEM and IBM approaches together. Consequently, this solver is then used to handle both static and dynamic particle problems as well as particle packed bed simulations. The validation of the solver can be performed by setting one static sphere in a channel and evaluate the drag coefficients and Strouhal number (when shedding occurs) at various Reynolds [less ▲] Detailed reference viewed: 111 (28 UL)The effect of liquid bridge model details on the dynamics of wet fluidized beds Wu, Mingqiu ; ; in AIChE Journal (2018), 64(2), 437-456 Wet fluidized beds of particles in small periodic domains are simulated using the CFD-DEM approach. A liquid bridge is formed upon particle-particle collisions, which then ruptures when the particle ... [more ▼] Wet fluidized beds of particles in small periodic domains are simulated using the CFD-DEM approach. A liquid bridge is formed upon particle-particle collisions, which then ruptures when the particle separation exceeds a critical distance. The simulations take into account both surface tension and viscous forces due to the liquid bridge. We perform a series of simulations based on different liquid bridge formation models: (1) the static bridge model of Shi and McCarthy, (2) a simple static version of the model of Wu et al., as well as (3) the full dynamic bridge model of Wu et al. We systematically compare the differences caused by different liquid bridge formation models, as well as their sensitivity to system parameters. Finally, we provide recommendations for which systems a dynamic liquid bridge model must be used, and for which application this appears to be less important [less ▲] Detailed reference viewed: 106 (29 UL)Liquid transport rates during binary collisions of unequally-sized particles Wu, Mingqiu ; ; in Powder Technology (2017), 309(1), 95-109 In this paper, we study the liquid transport between particles of different sizes, as well as build a dynamic liquid bridge model to predict liquid transport between these two particles. Specifically, the ... [more ▼] In this paper, we study the liquid transport between particles of different sizes, as well as build a dynamic liquid bridge model to predict liquid transport between these two particles. Specifically, the drainage process of liquid adhering to two unequally-sized, non-porous wet particles is simulated using direct numerical simulations (DNS). Same as in our previous work (Wu et al., AIChE Journal, 2016, 62:1877–1897), we first provide an analytical solution of a proposed dynamic liquid bridge model. We find that such an analytical solution also describes liquid transport during collisions of unequally-sized particles very well. Finally, we show that our proposed model structure is sufficient to collapse all our direct numerical simulation data. Our model is hence able to predict liquid transport rates in size-polydisperse systems for a wide range of parameters [less ▲] Detailed reference viewed: 91 (12 UL)Liquid Transport in Bi-disperse Particle Beds Wu, Mingqiu ; ; Poster (2016, September 15) Flow of highly saturated wet granular matter is encountered in wide range of engineering application, particularly in the pharmaceutics, food industry and energy sector , in addition, granular particles ... [more ▼] Flow of highly saturated wet granular matter is encountered in wide range of engineering application, particularly in the pharmaceutics, food industry and energy sector , in addition, granular particles beds usually compose of various of particle properties (i.e.,, shape, size, density, etc.) and it well know that particle size polydispersity and shape significantly influence on the transport of mass and liquid in a fluidized bed system. [less ▲] Detailed reference viewed: 35 (4 UL)A Model to Predict Liquid Bridge Formation Between Wet Particles Based on Direct Numerical Simulations Wu, Mingqiu ; ; in AIChE Journal (2016), 62(6), 1877-1987 We study dynamic liquid bridge formation, which is relevant for wet granular flows involving highly viscous liquids and short collisions. Specifically, the drainage process of liquid adhering to two ... [more ▼] We study dynamic liquid bridge formation, which is relevant for wet granular flows involving highly viscous liquids and short collisions. Specifically, the drainage process of liquid adhering to two identical, non-porous wet particles with different initial film heights is simulated using Direct Numerical Simulations (DNS). We extract the position of the interface, and define the liquid bridge and its volume by detecting a characteristic neck position. This allows us building a dynamic model for predicting bridge volume, and the liquid remaining on the particle surface. Our model is based on two dimensionless mobility parameters, as well as a dimensionless time scale to describe the filling process. In the present work model parameters were calibrated with DNS data. We find that the proposed model structure is sufficient to collapse all our simulation data, indicating that our model is general enough to describe liquid bridge formation between equally sized particles [less ▲] Detailed reference viewed: 117 (6 UL) |
||