Error estimation and error bounding in energy norm based on a displacement recovery technique

in ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers (2012)

Traditionally, recovery based error estimators in linear elasticity have considered the evaluation of an enhanced stress field obtained from the raw Finite Element (FE) stress solution. Instead of that ... [more ▼]

Traditionally, recovery based error estimators in linear elasticity have considered the evaluation of an enhanced stress field obtained from the raw Finite Element (FE) stress solution. Instead of that, one can also obtain a recovered displacement field from the FE displacements. Herein, we describe a superconvergent patch recovery of the displacement field which considers the local fulfilment of boundary and internal equilibrium equations, Dirichlet constraints and, for singular problems, the splitting of the displacement and stress fields into singular and smooth parts. Numerical tests using problems with known analytical solution have been carried out to validate the proposed technique for error estimation and error bounding in energy norm and quantities of interest. [less ▲]

Equilibrated patch recovery for accurate evaluation of upper error bounds in quantities of interest

in ECCOMAS Thematic Conference - ADMOS 2011: International Conference on Adaptive Modeling and Simulation, An IACM Special Interest Conference (2012)

There is an increasing interest on the use of goal-oriented error estimates which help to measure and control the local error on a linear or non-linear quantity of interest (QoI) that might result ... [more ▼]

There is an increasing interest on the use of goal-oriented error estimates which help to measure and control the local error on a linear or non-linear quantity of interest (QoI) that might result relevant for design purposes (e.g. the mean stress value in a particular area, displacements, the stress intensity factor for fracture problems,⋯). In general, residual-based error estimators have been used to obtain upper and lower bounds of the error in quantities of interest for finite element approximations. In this work, we propose a novel a posteriori recovery technique to obtain an upper error bound of the QoI. We use a recovery procedure based on the superconvergent patch recovery (SPR) technique to obtain nearly statically admissible recovered stress fields for the primal and dual problems. This recovery technique was previously used to obtain upper bounds of the error in energy norm and has been used in this paper to obtain a computable version of the upper bound for the quantity of interest. [less ▲]

Error estimation and bounding in energy norm based on a displacement recovery technique

in Eberhardsteiner, Josef; Böhm, Helmut; Rammerstorfer, F G (Eds.) 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (2012)

Practical error bounds in energy norm based on a recovered displacement field

in Pimienta, P M (Ed.) 10th World Congress on Computational Mechanics (WCCM 2012) (2012)

Accurate evaluation of K in XFEM using error estimation in quantities of interest based on equilibrated recovery

in Bordas, Stéphane; Kerfriden, P (Eds.) 2nd International Conference on the Extended Finite Element Method (2011)

Accurate evaluation of stress intensity factors using error estimation in quantities of interest based on equilibrated recovery

in Oliver, J; Jirasek, M; Allix, O (Eds.) et al Computational Modeling of Fracture and Failure of Materials and Structures. Proceedings of CFRAC 2011 (2011)

During the last years the use of error estimators which measure the error in a quantity of interest defined by the analyst, instead of the energy norm, have become increasingly popular as they provide an ... [more ▼]

During the last years the use of error estimators which measure the error in a quantity of interest defined by the analyst, instead of the energy norm, have become increasingly popular as they provide an error indicator for goal oriented adaptivity procedures. In this paper we propose an a posteriori recovery-based error estimation procedure which considers the stress intensity factor K typical of singular problems as the quantity of interest in finite element (FE) approximations. In general, error estimators in quantities of interest have been based on residual techniques and, although recovery techniques have been often preferred when considering the error in energy norm due to their robustness and simplicity, so far, there is no available procedure which considers an equilibrated recovery technique that can be used in standard FE frameworks. In [1] a standard SPR recovery technique is used to obtain an error measure of the J-integral, which is closely related to the value of the SIF. However, it does not consider any equilibrium constraints or the singularity near the crack tip, thus the obtained recovered stress field is not well suited for this kind of problems. The technique proposed herein relies on the enhanced superconvergent patch recovery technique presented in [2] to evaluate highly accurate recovered stress fields of the primal and dual problems, which are then used to obtain a sharp error estimate. The primal problem is simply the problem under analysis. To formulate the dual problem we consider the linear interaction integral representing K to obtain the applied loads of the dual FE approximation to solve. The high accuracy of the recovered stress fields for both the primal and dual solutions is obtained by decomposing the raw stress field obtained from the finite element approximations into singular and smooth parts, and enforcing the fulfilment of boundary and internal equilibrium equations. The results indicate an accurate estimation of the error in K for benchmark problems with exact solution. [less ▲]