References of "Chang, R.J"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailStrain and Damage Self-Sensing of BFRP Laminates Fabricated with CNFs/Epoxy Composites under Tension
Wang, Y.L; Wang, Y.S.; Wan, B.L. et al

in Composites. Part A, Applied Science and Manufacturing (2018)

This study investigated the strain and damage self-sensing capabilities of basalt fiber reinforced polymer (BFRP) laminates fabricated with carbon nanofibers (CNFs)/epoxy composites subjected to tensile ... [more ▼]

This study investigated the strain and damage self-sensing capabilities of basalt fiber reinforced polymer (BFRP) laminates fabricated with carbon nanofibers (CNFs)/epoxy composites subjected to tensile loadings. The conduction mechanisms based on the tunnel conduction and percolation conduction theories as well as the damage evolution were also explored. A compensation circuit with a half-bridge configuration was proposed. The results indicated the resistivity of the CNFs/BFRP laminates and CNFs/epoxy composites exhibited similar change rule, indicating that the conductive networks of CNFs/BFRP laminates were governed by CNFs/epoxy composites. With the increase of strain under monotonic tensile loading, the electrical resistance response could be classified into three stages corresponding to different damage modes. This confirmed CNFs/BFRP laminates have excellent self-sensing abilities to monitor their internal damages. Moreover, stable and repeatable strain self-sensing capacity of the CNFs/BFRP laminates was verified under cyclic tensile loading because the electrical resistance varied synchronously with the applied strain. [less ▲]

Detailed reference viewed: 32 (2 UL)
Full Text
Peer Reviewed
See detailIn Situ Strain and Damage Monitoring of GFRP Laminates Incorporating Carbon Nanofibers under Tension
Wang, Yanlei; Wang, Y.S.; Han, B.G. et al

in Polymers (2018)

In this study, conductive carbon nanofibers (CNFs) were dispersed into epoxy resin and then infused into glass fiber fabric to fabricate CNF/glass fiber-reinforced polymer (GFRP) laminates. The electrical ... [more ▼]

In this study, conductive carbon nanofibers (CNFs) were dispersed into epoxy resin and then infused into glass fiber fabric to fabricate CNF/glass fiber-reinforced polymer (GFRP) laminates. The electrical resistance and strain of CNF/GFRP laminates were measured simultaneously during tensile loadings to investigate the in situ strain and damage monitoring capability of CNF/GFRP laminates. The damage evolution and conduction mechanisms of the laminates were also presented. The results indicated that the percolation threshold of CNFs content for CNF/GFRP laminates was 0.86 wt % based on a typical power law. The resistance response during monotonic tensile loading could be classified into three stages corresponding to different damage mechanisms, which demonstrated a good ability of in situ damage monitoring of the CNF/GFRP laminates. In addition, the capacity of in situ strain monitoring of the laminates during small strain stages was also confirmed according to the synchronous and reversible resistance responses to strain under constant cyclic tensile loading. Moreover, the analysis of the resistance responses during incremental amplitude cyclic tensile loading with the maximum strain of 1.5% suggested that in situ strain and damage monitoring of the CNF/GFRP laminates were feasible and stable. [less ▲]

Detailed reference viewed: 25 (2 UL)