References of "Rabczuk, T"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailA simple and robust three-dimensional cracking-particle method without enrichment
Rabczuk, T.; Zi, G.; Bordas, Stéphane UL et al

in Computer Methods in Applied Mechanics & Engineering (2010), 199(37-40), 2437-2455

A new robust and efficient approach for modeling discrete cracks in meshfree methods is described. The method is motivated by the cracking-particle method (Rabczuk T., Belytschko T., International Journal ... [more ▼]

A new robust and efficient approach for modeling discrete cracks in meshfree methods is described. The method is motivated by the cracking-particle method (Rabczuk T., Belytschko T., International Journal for Numerical Methods in Engineering, 2004) where the crack is modeled by a set of cracked segments. However, in contrast to the above mentioned paper, we do not introduce additional unknowns in the variational formulation to capture the displacement discontinuity. Instead, the crack is modeled by splitting particles located on opposite sides of the associated crack segments and we make use of the visibility method in order to describe the crack kinematics. We apply this method to several two- and three-dimensional problems in statics and dynamics and show through several numerical examples that the method does not show any "mesh" orientation bias. © 2010 Elsevier B.V. [less ▲]

Detailed reference viewed: 132 (0 UL)
Full Text
Peer Reviewed
See detailAnalysis of thermoelastic waves in a two-dimensional functionally graded materials domain by the Meshless Local Petrov-Galerkin (MLPG) method
Akbari R., Ahmad; Bagri, A.; Bordas, Stéphane UL et al

in Computer Modeling in Engineering & Sciences (2010), 65(1), 27-74

This contribution focuses on the simulation of two-dimensional elastic wave propagation in functionally graded solids and structures. Gradient volume fractions of the constituent materials are assumed to ... [more ▼]

This contribution focuses on the simulation of two-dimensional elastic wave propagation in functionally graded solids and structures. Gradient volume fractions of the constituent materials are assumed to obey the power law function of position in only one direction and the effective mechanical properties of the material are determined by the Mori-Tanaka scheme. The investigations are carried out by extending a meshless method known as the Meshless Local Petrov-Galerkin (MLPG) method which is a truly meshless approach to thermo-elastic wave propagation. Simulations are carried out for rectangular domains under transient thermal loading. To investigate the effect of material composition on the dynamic response of functionally graded materials, a metal/ceramic (Aluminum (Al) and Alumina (Al 2O 3) are considered as ceramic and metal constituents) composite is considered for which the transient thermal field, dynamic displacement and stress fields are reported for different material distributions. Copyright © 2010 Tech Science Press. [less ▲]

Detailed reference viewed: 168 (5 UL)
Full Text
Peer Reviewed
See detailStrain smoothing in FEM and XFEM
Bordas, Stéphane UL; Rabczuk, T.; Hung, N.-X. et al

in Computers & Structures (2010), 88(23-24), 1419-1443

We present in this paper recent achievements realised on the application of strain smoothing in finite elements and propose suitable extensions to problems with discontinuities and singularities. The ... [more ▼]

We present in this paper recent achievements realised on the application of strain smoothing in finite elements and propose suitable extensions to problems with discontinuities and singularities. The numerical results indicate that for 2D and 3D continuum, locking can be avoided. New plate and shell formulations that avoid both shear and membrane locking are also briefly reviewed. The principle is then extended to partition of unity enrichment to simplify numerical integration of discontinuous approximations in the extended finite element method. Examples are presented to test the new elements for problems involving cracks in linear elastic continua and cracked plates. In the latter case, the proposed formulation suppresses locking and yields elements which behave very well, even in the thin plate limit. Two important features of the set of elements presented are their insensitivity to mesh distortion and a lower computational cost than standard finite elements for the same accuracy. These elements are easily implemented in existing codes since they only require the modification of the discretized gradient operator, B. © 2008 Elsevier Ltd. All rights reserved. [less ▲]

Detailed reference viewed: 159 (0 UL)
Full Text
Peer Reviewed
See detailA node-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner-Mindlin plates
Nguyen-Xuan, H.; Rabczuk, T.; Nguyen-Thanh, N. et al

in Computational Mechanics (2010), 46(5), 679-701

In this paper, a node-based smoothed finite element method (NS-FEM) using 3-node triangular elements is formulated for static, free vibration and buckling analyses of Reissner-Mindlin plates. The discrete ... [more ▼]

In this paper, a node-based smoothed finite element method (NS-FEM) using 3-node triangular elements is formulated for static, free vibration and buckling analyses of Reissner-Mindlin plates. The discrete weak form of the NS-FEM is obtained based on the strain smoothing technique over smoothing domains associated with the nodes of the elements. The discrete shear gap (DSG) method together with a stabilization technique is incorporated into the NS-FEM to eliminate transverse shear locking and to maintain stability of the present formulation.Aso-called node-based smoothed stabilized discrete shear gap method (NS-DSG) is then proposed. Several numerical examples are used to illustrate the accuracy and effectiveness of the present method. [less ▲]

Detailed reference viewed: 104 (0 UL)
Full Text
Peer Reviewed
See detailA cell-based smoothed finite element method for kinematic limit analysis
Le, Canh. V.; Nguyen-Xuan, H.; Askes, H. et al

in International Journal for Numerical Methods in Engineering (2010), 83(12), 1651-1674

This paper presents a new numerical procedure for kinematic limit analysis problems, which incorporates the cell-based smoothed finite element method with second-order cone programming. The application of ... [more ▼]

This paper presents a new numerical procedure for kinematic limit analysis problems, which incorporates the cell-based smoothed finite element method with second-order cone programming. The application of a strain smoothing technique to the standard displacement finite element both rules out volumetric locking and also results in an efficient method that can provide accurate solutions with minimal computational effort. The non-smooth optimization problem is formulated as a problem of minimizing a sum of Euclidean norms, ensuring that the resulting optimization problem can be solved by an efficient second-order cone programming algorithm. Plane stress and plane strain problems governed by the von Mises criterion are considered, but extensions to problems with other yield criteria having a similar conic quadratic form or 3D problems can be envisaged. [less ▲]

Detailed reference viewed: 102 (2 UL)
Full Text
Peer Reviewed
See detailAPPLICATION OF EXTENDED ELEMENT-FREE GALERKIN METHOD TO MULTIPLE FLAWS UNDER BRITTLE FRACTURE CONDITIONS
RABCZUK, T.; BEZENSEK, B.; Bordas, Stéphane UL

in PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2008, VOL 6, PT A AND B (2009)

The extended element-free Galerkin (XEFG) method incorporates cracks through partition of unity enrichment of the standard basis functions. Discontinuous functions are added to capture the jump through ... [more ▼]

The extended element-free Galerkin (XEFG) method incorporates cracks through partition of unity enrichment of the standard basis functions. Discontinuous functions are added to capture the jump through the crack faces and near-front enrichment is added to capture the asymptotic behaviour in the vicinity of the crack fronts. Depending on the material behaviour, these functions can be of various type. The method can treat initiation, growth and coalescence of cracks seamlessly in both linear elastic and non-linear settings. The method is a powerful tool for modelling and studying crack paths, which are a central feature in the assessment of multiple flaws.The method is applied to the problem of multiple non-aligned flaws in a ferritic plate under cleavage failure. Fracture paths from two nonaligned notches in a plate are modelled. Based on the observations of crack paths the critical flaw alignment distance is established for nonaligned through-wall flaws. [less ▲]

Detailed reference viewed: 84 (0 UL)
Full Text
Peer Reviewed
See detailA smoothed finite element method for shell analysis
Nguyen-Thanh, N.; Rabczuk, T.; Nguyen-Xuan, H. et al

in Computer Methods in Applied Mechanics & Engineering (2008), 198(2), 165-177

A four-node quadrilateral shell element with smoothed membrane-bending based on Mindlin-Reissner theory is proposed. The element is a combination of a plate bending and membrane element. It is based on ... [more ▼]

A four-node quadrilateral shell element with smoothed membrane-bending based on Mindlin-Reissner theory is proposed. The element is a combination of a plate bending and membrane element. It is based on mixed interpolation where the bending and membrane stiffness matrices are calculated on the boundaries of the smoothing cells while the shear terms are approximated by independent interpolation functions in natural coordinates. The proposed element is robust, computationally inexpensive and free of locking. Since the integration is done on the element boundaries for the bending and membrane terms, the element is more accurate than the MITC4 element for distorted meshes. This will be demonstrated for several numerical examples. [less ▲]

Detailed reference viewed: 105 (1 UL)
Full Text
Peer Reviewed
See detailA smoothed finite element method for plate analysis
Nguyen-Xuan, H.; Rabczuk, T.; Bordas, Stéphane UL et al

in Computer Methods in Applied Mechanics & Engineering (2008), 197(13-16), 1184-1203

A quadrilateral element with smoothed curvatures for Mindlin-Reissner plates is proposed. The curvature at each point is obtained by a non-local approximation via a smoothing function. The bending ... [more ▼]

A quadrilateral element with smoothed curvatures for Mindlin-Reissner plates is proposed. The curvature at each point is obtained by a non-local approximation via a smoothing function. The bending stiffness matrix is calculated by a boundary integral along the boundaries of the smoothing elements (smoothing cells). Numerical results show that the proposed element is robust, computational inexpensive and simultaneously very accurate and free of locking, even for very thin plates. The most promising feature of our elements is their insensitivity to mesh distortion. [less ▲]

Detailed reference viewed: 85 (1 UL)
Peer Reviewed
See detailThe smoothed extended finite element method
Natarajan, S.; Bordas, Stéphane UL; Minh, Q. D. et al

in Proceedings of the 6th International Conference on Engineering Computational Technology (2008)

This paper shows how the strain smoothing technique recently proposed by G.R.Liu [1] coined as smoothed finite element method (SFEM) can be coupled to partition of unity methods, namely extended finite ... [more ▼]

This paper shows how the strain smoothing technique recently proposed by G.R.Liu [1] coined as smoothed finite element method (SFEM) can be coupled to partition of unity methods, namely extended finite element method (XFEM) [2] to give birth to the smoothed extended finite element method (SmXFEM), which shares properties both with the SFEM and the XFEM. The proposed method suppresses the need to compute and integrate the derivatives of shape functions (which are singular at the tip in linear elastic fracture mechanics). Additionally, integration is performed along the boundary of the finite elements or smoothing cells and no isoparametric mapping is required, which allows elements of arbitrary shape. We present numerical results for cracks in linear elastic fracture mechanics problems. The method is verified on several examples and comparisons are made to the conventional XFEM. © 2008 Civil-Comp Press. [less ▲]

Detailed reference viewed: 182 (1 UL)
Full Text
Peer Reviewed
See detailMeshless methods: A review and computer implementation aspects
Nguyen, V. P.; Rabczuk, T.; Bordas, Stéphane UL et al

in Mathematics & Computers in Simulation (2008), 79(3), 763-813

The aim of this manuscript is to give a practical overview of meshless methods (for solid mechanics) based on global weak forms through a simple and well-structured MATLAB code, to illustrate our ... [more ▼]

The aim of this manuscript is to give a practical overview of meshless methods (for solid mechanics) based on global weak forms through a simple and well-structured MATLAB code, to illustrate our discourse. The source code is available for download on our website and should help students and researchers get started with some of the basic meshless methods; it includes intrinsic and extrinsic enrichment, point collocation methods, several boundary condition enforcement schemes and corresponding test cases. Several one and two-dimensional examples in elastostatics are given including weak and strong discontinuities and testing different ways of enforcing essential boundary conditions. © 2008 IMACS. [less ▲]

Detailed reference viewed: 1076 (4 UL)
Full Text
Peer Reviewed
See detailThree-dimensional non-linear fracture mechanics by enriched meshfree methods without asymptotic enrichment
Bordas, Stéphane UL; Zi, G.; Rabczuk, T.

in Proceedings of the IUTAM Symposium on Discretization Methods for Evolving Discontinuities (2007)

This paper presents a three-dimensional, extrinsically enriched meshfree method for initiation, growth and coalescence of an arbitrary number of cracks in non-linear solids including large deformations ... [more ▼]

This paper presents a three-dimensional, extrinsically enriched meshfree method for initiation, growth and coalescence of an arbitrary number of cracks in non-linear solids including large deformations, for statics and dynamics. The novelty of the methodology fashioned in this work is that only an extrinsic discontinuous enrichment and no near-tip/asymptotic enrichment is required. Instead, a Lagrange multiplier field is added along the crack front to close the crack along the front. This decreases the computational cost and removes difficulties involved with a branch enrichment. Numerical examples treated include the pull-out of a reinforcement bar from a concrete block, and a Taylor bar impact with very large deformation and fragmentation. The results are compared to experimental results, and other simulations from the literature, which shows the robustness and accuracy of the method. © 2007 Springer. [less ▲]

Detailed reference viewed: 148 (0 UL)