References of "Gericke, Kilian 50001840"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailA framework to understand Project Robustness
Gericke, Kilian UL; Schmidt-Kretschmer, Michael; Blessing, Lucienne UL

in Proceedings of the 10th International Design Conference - DESIGN 2008 (2008)

Detailed reference viewed: 51 (1 UL)
Full Text
Peer Reviewed
See detailMöglichkeiten und Grenzen generischer Ansätze als Beitrag zur Steigerung der Robustheit von Produktentwicklungsprojekten
Gericke, Kilian UL; Schmidt-Kretschmer, Michael; Blessing, Lucienne UL

in Proceedings of 18th Symposium Design for X (2007)

Zur Darstellung des theoretischen Rahmens dieser Arbeit werden ein Modell zur Visualisierung der Vernetzung von Einflussfaktoren auf den Projekterfolg aus den Domänen Projekt-Management, Produkt und ... [more ▼]

Zur Darstellung des theoretischen Rahmens dieser Arbeit werden ein Modell zur Visualisierung der Vernetzung von Einflussfaktoren auf den Projekterfolg aus den Domänen Projekt-Management, Produkt und Stakeholder und ein Verbesserungsprozess zur Steigerung der Robustheit von Produktentwicklungsprojekten vorgestellt. Vor diesem Hintergrund werden die Grenzen aber auch die Möglichkeiten generischer Lösungsansätze diskutiert. Anhand einer Fallstudie wird untersucht welche Barrieren die Durchführung des Verbesserungsprozesses und somit auch die Anwendung der Lösungsansätze in der Praxis erschweren. Die Analysen zeigen, dass die Kenntnis der Ursachen von Problemen, die zu Planungsabweichungen in Produktenwicklungsprojekten führen, und eine entsprechende Anpassung der Handlungsempfehlungen Voraussetzungen zur Implementierung daraus abgeleiteter Maßnahmen sind. Die domänenübergreifende Betrachtung möglicher Einflussfaktoren gemäß dem Konzept der Robustheit führt während der Ursachenanalyse zu einem fundierten Verständnis der Problemlage und ermöglicht eine bessere Anpassung der Lösungsansätze. Aus den theoretischen Vorüberlegungen und den Ergebnissen der Fallstudie werden Anforderungen an die Weiterentwicklung des Ansatzes zur Steigerung der Robustheit von Produktentwicklungsprojekten abgeleitet, der die Anwender unterstützen soll, den Transfer empirischer Erkenntnisse und Handlungsempfehlungen auf individuelle Problemstellungen zu vollziehen. [less ▲]

Detailed reference viewed: 70 (0 UL)
Full Text
Peer Reviewed
See detailDealing with requirements: Influences on Idea Generation in the Early Stages of Product Development
Gericke, Kilian UL; Schmidt-Kretschmer, Michael; Blessing, Lucienne UL

in Proceedings of DTRS7: Design Meeting Protocols (2007)

This paper aims at identifying factors which influence the number of ideas generated during a brainstorming meeting as part of an industrial mechanical engineering design project. A framework for ... [more ▼]

This paper aims at identifying factors which influence the number of ideas generated during a brainstorming meeting as part of an industrial mechanical engineering design project. A framework for describing groups of influencing factors and their relationships is used. As a result of an explorative, comparative protocol analysis of two design meetings the influence of some factors is described e.g. the formulation of the design task description and the sequence of the process steps. [less ▲]

Detailed reference viewed: 145 (1 UL)
Full Text
Peer Reviewed
See detailManaging requirements or be managed by requirements - results of an empirical study
Schmidt-Kretschmer, Michael; Gericke, Kilian UL; Blessing, Lucienne UL

in Proceedings of the 16th International Conference on Engineering Design (2007)

In order to remain competitive, e.g. in the face of globalisation, many small and medium-sized product development manufacturers feel the need to change or refine their development processes. One of the ... [more ▼]

In order to remain competitive, e.g. in the face of globalisation, many small and medium-sized product development manufacturers feel the need to change or refine their development processes. One of the key activities is to systematically translate the needs of customers into development requirements. Little is known about how small and medium enterprises (SMEs) deal with the complex topic requirements management and studies of large numbers of cases are still the exception. Many SMEs have problems in managing requirements. They often have the capabilities for requirements management but the processes are not well defined, e.g. insufficient monitoring of specifications and poorly organised customer contacts. How to work with frozen specifications and how to handle the wishes of the customers seem not to be fully understood. This paper presents selected results of an empirical study into product development of SMEs in the UK. The predominantly qualitative data was collected using a questionnaire which was designed as a self-help package. [less ▲]

Detailed reference viewed: 87 (0 UL)
Full Text
Peer Reviewed
See detailAnalyse prozessbezogener Einflussfaktoren zur Steigerung der Robustheit von Produktenwicklungsprojekten
Gericke, Kilian UL; Blessing, Lucienne UL

in Proceedings of 17th Symposium Design for X (2006)

Auf Basis des Konzeptes der Robustheit von Produktentwicklungsprojekten werden Effekte dargelegt, die zu Planungsabweichungen führen. Das Konzept wird durch eine Diskussion der Erfolgskriterien von ... [more ▼]

Auf Basis des Konzeptes der Robustheit von Produktentwicklungsprojekten werden Effekte dargelegt, die zu Planungsabweichungen führen. Das Konzept wird durch eine Diskussion der Erfolgskriterien von Projekten und möglichen Ansatzpunkten zur Steigerung der Robustheit umrissen. Als Ergebnis einer Literaturstudie wurden Problemschwerpunkte hinsichtlich der Ursachen von Planungsabweichungen und deren Erscheinungsformen identifiziert. Auf Grundlage dieser Studien lassen sich jedoch keine Ansätze zur Steigerung der Robustheit von Produktentwicklungsprojekten ableiten. Die Betrachtung der Studien bildet den Ausgangspunkt für eigene Untersuchungen, die zu einem besseren Verständnis der Ursachen von Planungsabweichungen in Produktentwicklungsprojekten und zur Ableitung von Handlungsempfehlungen führen sollen. [less ▲]

Detailed reference viewed: 62 (0 UL)
Full Text
Peer Reviewed
See detailEine adaptive Produktentwicklungsmethodik als Beitrag zur Prozessgestaltung in der Produktentwicklung
Meißner, Moritz; Gericke, Kilian UL; Gries, Bruno et al

in Proceedings of 16th Symposium Design for X (2005)

In den letzen Jahrzehnten ist eine Vielzahl von Modellen zur methodischen Unterstützung des Produktentwicklungsprozesses (PEP) entstanden. Diese präskriptiven Modelle beinhalten oft den impliziten ... [more ▼]

In den letzen Jahrzehnten ist eine Vielzahl von Modellen zur methodischen Unterstützung des Produktentwicklungsprozesses (PEP) entstanden. Diese präskriptiven Modelle beinhalten oft den impliziten Anspruch, in jeder Branche und auf die Entwicklung jeder Art von Produkten anwendbar zu sein. Um dem gerecht zu werden, beschreiben die Modelle den PEP auf einem relativ abstrakten Niveau. Eine Anpassung an den Kontext der Produktentwicklung erfolgt in der Regel nicht. Existierende Ansätze ermöglichen eine Analyse des Kontexts aus verschiedenen Blickwinkeln, bieten jedoch keine konkreten Vorschläge, wie diese Analyse in den Prozess der Produktentwicklung einfließen kann. Welche Auswirkungen ausgewählte Kontextfaktoren auf tatsächliche PEP haben, geht aus einer schriftlichen Befragung von 1000 deutschen Unternehmen des produzierenden Gewerbes hervor. Es werden die Grundlagen einer Vorgehensweise beschrieben, welche basierend auf dem Kontext der Produktentwicklung die Gestaltung effektiver, effizienter, transparenter und methodisch unterstützter Produktentwicklungsprozesse ermöglichen soll. [less ▲]

Detailed reference viewed: 145 (0 UL)
Full Text
Peer Reviewed
See detailHow companies learn from design flaws: results from an empirical study of the german manufacturing industry
Gries, Bruno; Gericke, Kilian UL; Blessing, Lucienne UL

in Proceedings of the 15th International Conference on Engineering Design (2005)

Design flaws often become apparent at a time when the product is already in use and its development process, which in many cases includes extensive testing of parts, components and prototypes, is ... [more ▼]

Design flaws often become apparent at a time when the product is already in use and its development process, which in many cases includes extensive testing of parts, components and prototypes, is considered complete. Such flaws may reach from poor ergonomics to the total failure of the product. Often, especially when user safety is at risk, design flaws are so severe that companies are forced to announce a product callback. Petroski suggests that many (if not most) products, which we are familiar with today, have a long history of previously flawed designs [3]. This implies that designers did indeed learn from design flaws in both senses of the word “learn”: discovering the flaw and utilizing the knowledge gained about it to find a solution. As far as discovering a design flaw is concerned, it can be assumed that the feedback from those who interact with the physical products in practice – the individuals who maintain, repair, recycle but essentially use the products – plays an important role. In their previous work, the authors pointed out hat this feedback information could not only be vital for identifying potential product hazards but helps designers to review the effects of their design measures and therefore to improve their products from generation to generation [4]. In order to obtain a better understanding of how designers learn from design flaws, a mail survey was conducted that aimed at investigating company-, process- and product-related factors of this phenomenon and to answer (among others) the following research questions: • To what extent are design flaws of a company’s (or a competitor’s) product a driving force in the development of new products? • How do the designers of a company become aware of design flaws of their products? • How successful are companies in correcting design flaws? • How do successful and unsuccessful companies differ in terms of size, activity profile of their designers and characteristics of their products? • What are possible factors that influence the success in correcting a design fault? [less ▲]

Detailed reference viewed: 145 (2 UL)
See detailZerstörungsfrei lösbares Schlusselement für axial und radial gefügte mechanische Verbindungen
Klett, Jan; Großmann, Christoph; Kammerer, Uwe et al

Patent (2003)

The connecting element comprises a bolt (1) and geometrically defined balls (2) which by a housing (4) and a tube (3) are brought into a defined position and held there. The bolt is introduced into the ... [more ▼]

The connecting element comprises a bolt (1) and geometrically defined balls (2) which by a housing (4) and a tube (3) are brought into a defined position and held there. The bolt is introduced into the mechanism consisting of the balls, housing and tube by its contour which conforms to the geometrically defined balls, with a form fit being created between the bolt and the aforesaid mechanism. As the diameter of the mechanism is greater than that of the bore in the connecting halves (6,7) a form fit is created between the connecting element and connecting partners like a screw head. [less ▲]

Detailed reference viewed: 89 (2 UL)
See detailZerstörend lösbares Schlusselement für axial und radial gefügte mechanische Verbindungen
Klett, Jan; Großmann, Christoph; Kammerer, Uwe et al

Patent (2003)

The bolt (4) has a countersunk profile within a ring of separate segments (1) surrounded by a collar the strain in which is measured by a sensor element (2) to determine the clamping torque of the bolt in ... [more ▼]

The bolt (4) has a countersunk profile within a ring of separate segments (1) surrounded by a collar the strain in which is measured by a sensor element (2) to determine the clamping torque of the bolt in a workpiece. [less ▲]

Detailed reference viewed: 55 (0 UL)