Browse ORBi

- What it is and what it isn't
- Green Road / Gold Road?
- Ready to Publish. Now What?
- How can I support the OA movement?
- Where can I learn more?

ORBi

Joint Bit Allocation and Hybrid Beamforming Optimization for Energy Efficient Millimeter Wave MIMO Systems ; ; et al in IEEE Transactions on Green Communications and Networking (2021), 5(1), 119-132 In this paper, we aim to design highly energy efficient end-to-end communication for millimeter wave multiple-input multiple-output systems. This is done by jointly optimizing the digital-to-analog ... [more ▼] In this paper, we aim to design highly energy efficient end-to-end communication for millimeter wave multiple-input multiple-output systems. This is done by jointly optimizing the digital-to-analog converter (DAC)/analog-to-digital converter (ADC) bit resolutions and hybrid beamforming matrices. The novel decomposition of the hybrid precoder and the hybrid combiner to three parts is introduced at the transmitter (TX) and the receiver (RX), respectively, representing the analog precoder/combiner matrix, the DAC/ADC bit resolution matrix and the baseband precoder/combiner matrix. The unknown matrices are computed as a solution to the matrix factorization problem where the optimal fully digital precoder or combiner is approximated by the product of these matrices. A novel and efficient solution based on the alternating direction method of multipliers is proposed to solve these problems at both the TX and the RX. The simulation results show that the proposed solution, where the DAC/ADC bit allocation is dynamic during operation, achieves higher energy efficiency when compared with existing benchmark techniques that use fixed DAC/ADC bit resolutions. [less ▲] Detailed reference viewed: 53 (7 UL)Efficient Algorithms for Constant-Modulus Analog Beamforming Arora, Aakash ; ; Mysore Rama Rao, Bhavani Shankar et al in IEEE Transactions on Signal Processing (2021) The use of a large-scale antenna array (LSAA) has become an important characteristic of multi-antenna communication systems to achieve beamforming gains. For example, in millimeter wave (mmWave) systems ... [more ▼] The use of a large-scale antenna array (LSAA) has become an important characteristic of multi-antenna communication systems to achieve beamforming gains. For example, in millimeter wave (mmWave) systems, an LSAA is employed at the transmitter/receiver end to combat severe propagation losses. In such applications, each antenna element has to be driven by a radio frequency (RF) chain for the implementation of fully-digital beamformers. This strict requirement significantly increases the hardware cost, complexity, and power consumption. Therefore, constant-modulus analog beamforming (CMAB) becomes a viable solution. In this paper, we consider the scaled analog beamforming (SAB) or CMAB architecture and design the system parameters by solving the beampattern matching problem. We consider two beampattern matching problems. In the first case, both the magnitude and phase of the beampattern are matched to the given desired beampattern whereas in the second case, only the magnitude of the beampattern is matched. Both the beampattern matching problems are cast as a variant of the constant-modulus least-squares problem. We provide efficient algorithms based on the alternating majorization-minimization (AMM) framework that combines the alternating minimization and the MM frameworks and the conventional-cyclic coordinate descent (C-CCD) framework to solve the problem in each case. We also propose algorithms based on a new modified-CCD (M-CCD) based approach. For all the developed algorithms we prove convergence to a Karush-Kuhn-Tucker (KKT) point (or a stationary point). Numerical results demonstrate that the proposed algorithms converge faster than state-of-the-art solutions. Among all the algorithms, the M-CCD-based algorithms have faster convergence when evaluated in terms of the number of iterations and the AMM-based algorithms offer lower complexity. [less ▲] Detailed reference viewed: 156 (9 UL)Analog Beamforming with Antenna Selection for Large-Scale Antenna Arrays Arora, Aakash ; ; Mysore Rama Rao, Bhavani Shankar et al in Proc. 2021 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP) (2021) In large-scale antenna array (LSAA) wireless communication systems employing analog beamforming architectures, the placement or selection of a subset of antennas can significantly reduce the power ... [more ▼] In large-scale antenna array (LSAA) wireless communication systems employing analog beamforming architectures, the placement or selection of a subset of antennas can significantly reduce the power consumption and hardware complexity. In this work, we propose a joint design of analog beamforming with antenna selection (AS) or antenna placement (AP) for an analog beamforming system. We approach this problem from a beampattern matching perspective and formulate a sparse unit-modulus least-squares (SULS) problem, which is a nonconvex problem due to the unit-modulus and the sparsity constraints. To that end, we propose an efficient and scalable algorithm based on the majorization-minimization (MM) framework for solving the SULS problem. We show that the sequence of iterates generated by the algorithm converges to a stationary point of the problem. Numerical results demonstrate that the proposed joint design of analog beamforming with AS outperforms conventional array architectures with fixed inter-antenna element spacing. [less ▲] Detailed reference viewed: 95 (17 UL)Constant-Envelope Precoding for Satellite Systems ; Arora, Aakash ; Ottersten, Björn in Proc. 2020 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP) (2020) In this paper, Constant-Envelope Precoding techniques are presented for satellite-based communication systems. In the developed transmission technique the signals of the antennas are designed to be of ... [more ▼] In this paper, Constant-Envelope Precoding techniques are presented for satellite-based communication systems. In the developed transmission technique the signals of the antennas are designed to be of constant amplitude, improving the robustness of the latter to the non-linear distortions on satellite systems, introduced by the employed on-board Traveling-Wave-Tube-Amplifiers. We consider the forward link of a multi-beam broadband satellite system where the aim is to design the signals at the gateway such that the desired symbols are transmitted to the intended user terminals and the transmitted signals from the satellite terminal are of constant amplitude. At first, the gateway signals are designed given that a fixed on-board beamformer is applied to the satellite terminal. Then, the case of an adaptive on-board beamformer is considered which is designed jointly with the gateway signals. The design of the gateway signals and the adaptive on-board beamformer, in the second case, requires solving difficult nonconvex problems. Efficient algorithmic solutions are developed based on the saddle point method. The effectiveness of the proposed approaches is verified via numerical results. [less ▲] Detailed reference viewed: 77 (13 UL) |
||