References of "Simon, Claude"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailGravel wash mud, a quarry waste material as supplementary cementitious material (SCM)
Thapa, Vishojit Bahadur UL; Waldmann, Danièle UL; Simon, Claude

in Cement and Concrete Research (2019), 124(105833),

The suitability of gravel wash mud (GWM), a sludge waste from gravel quarrying, is examined for its use as a partial Ordinary Portland cement (OPC) clinker substitute. The gravel wash mud was dried ... [more ▼]

The suitability of gravel wash mud (GWM), a sludge waste from gravel quarrying, is examined for its use as a partial Ordinary Portland cement (OPC) clinker substitute. The gravel wash mud was dried, milled into a fine powder and calcined at 750°C, 850°C and 950°C. In this study, various characterisation methods including particle size distribution (PSD), X-ray fluorescence (XRF), X-ray diffraction (XRD) and the simultaneous thermal analysis (STA) were applied on the calcined GWM powders to determine the optimal calcination temperature. Over 200 specimens were prepared based on different cement paste and mortar mixes to investigate the potential of calcined GWM powders as SCMs. The pozzolanic activity of the GWM powders was verified by applying strength-based evaluation methods, simultaneous thermal analysis and SEM on hardened samples. Very promising strength-enhancing capacities were observed for samples containing GWM powders calcined at 850°C with a OPC replacement level of 20 wt.%. [less ▲]

Detailed reference viewed: 56 (11 UL)
Full Text
See detailMechanical characterisation of alkali activated clay - based geopolymer binder made out of gravel wash mud
Thapa, Vishojit Bahadur UL; Waldmann, Danièle UL; Wagner, Jean-Frank et al

Poster (2017, April 03)

One of the most promising cement alternatives are geopolymer cements. The term “geopolymer” was mentioned for the first time by Davidovits and classifies all forms of inorganic polymeric material ... [more ▼]

One of the most promising cement alternatives are geopolymer cements. The term “geopolymer” was mentioned for the first time by Davidovits and classifies all forms of inorganic polymeric material synthesised by chemical reaction of aluminosilicates and an alkaline activating solution. The production of geopolymer binder comprises in two main procedures: calcination and geopolymerisation. The synthesised geopolymer shows interesting characteristics like good mechanical properties, high strength and good durability. [less ▲]

Detailed reference viewed: 186 (40 UL)
Full Text
Peer Reviewed
See detailMechanical characterisation of alkali activated clay - based geopolymer binder made out of gravel wash mud
Thapa, Vishojit Bahadur UL; Waldmann, Danièle UL; Wagner, Jean-Frank et al

in Iacobescu, Remus Ion; Malfliet, Annelies (Eds.) Proceedings of the 5th International Slag Valorisation Symposium (2017, April)

One of the most promising cement alternatives are geopolymer cements. The term “geopolymer” was mentioned for the first time by Davidovits1 and classifies all forms of inorganic polymeric material ... [more ▼]

One of the most promising cement alternatives are geopolymer cements. The term “geopolymer” was mentioned for the first time by Davidovits1 and classifies all forms of inorganic polymeric material synthesised by chemical reaction of aluminosilicates and an alkaline activating solution. The production of geopolymer binder comprises in two main procedures: calcination and geopolymerisation. The synthesised geopolymer shows interesting characteristics like good mechanical properties, high strength and good durability. [less ▲]

Detailed reference viewed: 181 (19 UL)